| No. | Brand | C | K | A | T | a | G | h | b |
| 35x55x10 | - | - | - | - | - | - | - | - | - |
| 2-in-1 | - | - | - | - | - | - | - | - | - |
| 1000 | koyo | - | - | - | - | - | M 100x2 | 4 mm | 10 mm |
| 18mm | - | - | - | - | - | 5 mm | - | 81.5 mm | - |
| 800 | NTN | - | - | - | - | - | - | - | - |
| 6204 | Nachi | - | - | - | - | 4.5 mm | - | - | - |
| 50kg | - | - | - | - | 405 mm | - | - | - | - |
| 20/925080 | Rexroth | - | - | - | - | - | - | - | - |
| 6208-ZZC3 | koyo | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | 319.075 mm | - | - |
| WA380-6 | - | - | - | - | - | - | - | - | - |
| 2020 | - | - | - | - | - | - | - | - | - |
| T6C | - | - | 12 mm | - | - | - | - | - | - |
| pc60-7 | - | - | - | - | - | - | - | - | - |
| 6313 | NSK | - | - | - | - | - | - | - | - |
| 16002 | - | - | - | - | - | - | - | - | mm |
| IR-384828 | koyo | - | - | - | - | - | - | - | - |
| 5x11x3 | - | - | - | - | - | 20 mm | - | - | - |
| 1200 | NTN | - | - | - | - | - | - | - | - |
| D65EX-16 | - | - | - | - | - | - | - | - | - |
| 6309 | SKF | - | - | - | - | - | 239.827 mm | - | - |
| WJ-162116 | koyo | - | - | - | - | - | - | - | mm |
| MM208K | FAFNIR | - | - | - | - | - | - | - | - |
| 6308 | Nachi | - | - | - | - | - | - | - | - |
| 12300-60840-012 | - | - | - | - | - | - | - | - | - |
| 10pcs | - | - | - | - | - | - | - | - | 22.3 mm |
| ZDR6DB2-43/75YM | Rexroth | - | - | - | - | - | - | - | 3 mm |
| 2 | - | - | - | - | - | - | - | - | - |
| Slewing Bearing For Komatsu PC350-7 Excavator | B:47.60 mm; Accessories:One Shield; Basic Dynamic Radial Load Rating C:95200 N; Oil Speed Rating n2:5300 rpm; D:110.0000 mm; d:50.000 mm; Basic Static Radial Load Rating Co:95000 N; Sealed Speed Rating n3:4000 rpm; Fillet Radius ra:2.00 mm; Grease Speed Rating n1:4000 rpm; |
| HD450-7 Slewing Bearing | Sealed Speed Rating n3:7500 rpm; Basic Dynamic Radial Load Rating C:20800 N; Oil Speed Rating Open/Shielded n2:13000 rpm; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:11400 N; Grease Speed Rating Open/Shielded n1:10000 rpm; D:62.0000 mm; d:30.000 mm; B:23.81 mm; Accessories:Metal Shields; |
| CAT325C Slewing Bearing | B:65.00 mm; d:280.000 mm; Sealed Speed Rating n3:890 rpm; Basic Dynamic Radial Load Rating C:302000 N; Basic Static Radial Load Rating Co:405000 N; D:420.0000 mm; Oil Speed Rating Open/Shielded n2:1700 rpm; Grease Speed Rating Open/Shielded n1:1400 rpm; Fillet Radius ra:3.00 mm; Accessories:Two Shields; |
| A16-86P1 Four Point Contact Ball Slewing Bearings SLEWING RINGS | Fillet Radius ra:2.00 mm; Accessories:Two Shields & Snap-R; d:60.000 mm; Grease Speed Rating Open/Shielded n1:4300 rpm; Basic Static Radial Load Rating Co:78000 N; Basic Dynamic Radial Load Rating C:91300 N; Oil Speed Rating Open/Shielded n2:5300 rpm; B:31.00 mm; D:130.0000 mm; |
| RKS.060.25.1644 Slewing Bearing Without Gear 1536x1752x68mm | Max. speed for PosiTrac Plus seal:2350 r/min; R2:21.431 mm; Mass pillow block:12.7 kg; Cap bolt:2 x 1/2-13 UNC; Ca:37.008 mm; L:285.75 mm; P90°:32.5 kN; Labyrinth ring:2 x LOR 37; Appropriate attachment bolt size G:0.5 in; End plug (suffix Y):EPR 7; |
| MTE-265 Bearing 10.433'' Bore Slewing Bearing | Max. speed for PosiTrac Plus seal:1800 r/min; R1:60.325 mm; Initial grease fill:141.75 g; Stabilizing ring:SR-18-15; End plug (suffix Y):EPR 11; ba:47.625 mm; H:192.484 mm; Housing:SAW 518; Pa:14.1 kN; da:77.787 mm; |
| RB15013 Cross Roller Bearings 150*180*13mm | Pu:2410 kN; d:380 mm; with cylindrical bore:420 min-1; Oil:358.020 kN; Static (Cor):22.3 mm; rs (min):5 mm; D:560 mm; Dynamic (Cr):12 mm; B:135 mm; with tapered bore:500 min-1; |
| RB8016 Crossed Roller Bearings 80*120*16mm | d:50.000 mm; Accessories:Seal & Snap-Ring; Grease Speed Rating Open/Shielded n1:5200 rpm; Oil Speed Rating Open/Shielded n2:6300 rpm; Basic Static Radial Load Rating Co:52000 N; Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:3700 rpm; B:31.00 mm; D:130.0000 mm; Basic Dynamic Radial Load Rating C:87100 N; |
| RU 66 UU Crossed Roller Bearing 35x95x15mm | Recommended diameter for attachment bolts, inch G:0.375 in; Fatigue load limit Pu:0.335 kN; J min.:94 mm; B1:33 mm; Housing material:Cast iron; N1:11.5 mm; N:19.5 mm; H1:36.5 mm; Recommended tightening torque for grub screw:4.2 N·m; Limiting speed:1500 r/min; |
| 232.21.0975.013 Four Contact Ball Slewing Ring 842x1047x56mm | Oil:361.260 kN; D:500 mm; Grease:4490 kN; Dynamic (Cr):9 mm; with tapered bore:630 min-1; B:160 mm; rs (min):5 mm; d:300 mm; Pu:2560 kN; with cylindrical bore:530 min-1; |
RK6-33N1Z Heavy Duty Slewing Ring Bearing With Internal Gear Video
BS 1088 - Wikipedia
In materials, BS 1088 is the British Standard specification for marine plywood that applies to plywood produced with untreated tropical hardwood veneers that have a set level of resistance to fungal attack. The plies are bonded with Weather Boil Proof (WBP) glue
meranti bs1088 hydrotek 6mm 5 ply marine grade plywood 4
Our BS 1088 is Lloyds certified, the BS 6566 version allows slightly thinner veneers and some filled end splits in the faces, but the same void free core and WBP
BS 1088 (Hydrotek) – Midwest Boat Appeal & Marine Plywood
BS 1088 Hydrotek is a multi-ply marine plywood that is superior to all standard Meranti plywood currently produced. Both face and inner plies are constructed from whole piece, color matched, Meranti veneers. Hydrotek is used in boat building applications where only the best will do
Okoume Marine Plywood: BS 1088 Quality - 3mm, 4mm, 6mm
4mm, 5/32", 13 lbs, 3, BS1088. 6mm, 1/4", 21 lbs, 5, BS1088. 9mm, 3/8", 31 lbs, 5, BS1088. 12mm, 1/2", 42 lbs, 7, BS1088. 18mm, 3/4", 62 lbs, 11, BS1088
Hydrotek, Meranti, Bs 1088 Rules 5 Ply 6mm x 4' x 8
Hydrotek Marine Plywood is manufactured utilizing BS 1088 specifications, it is a multiply type construction, with balanced internal plys and thick (1mm before
Okoume Plywood - BS 1088 Joubert Marine Grade | Marine
Buy Okoume plywood online. High quality Okoume marine grade plywood by Joubert. Meets BS 1088 and Lloyd's Register Type Approved. Shipped nationwide
Marine Plywood - Boulter Plywood
Okoume A/B BS1088 Lloyds Approved Quantity Discounts. Water & boil proof glue (WBP), Whole piece rotary cut face, Minimum 1.2mm face veneer thickness