| No. | Brand | C | K | A | T | a | G | h | b |
| ListingAT10123 | John Deere | - | - | - | - | - | - | 54.769 mm | - |
| 450 | - | - | - | - | - | - | - | - | - |
| 6211 | SKF | - | - | - | - | - | - | - | - |
| 21%N | - | - | - | 30 mm | - | - | - | - | - |
| TFE9184 | - | - | - | - | - | - | - | - | - |
| 1200*1000*1000mm | - | - | - | - | - | - | - | - | - |
| KA035AR0 | RBC | - | - | - | - | - | - | - | - |
| PVD-3B-54 | - | - | - | - | - | - | - | - | - |
| 1200X1000 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 2MM204WICRDUL | FAFNIR | - | - | - | - | - | - | - | - |
| SC46 | - | - | - | - | - | - | - | 56.356 mm | - |
| 14" | - | 22 mm | - | - | 27.25 mm | - | - | - | - |
| 57135-000 | Parker | - | - | - | - | - | - | - | - |
| 25X12-9 | - | - | - | - | - | - | - | 150 mm | - |
| 15mm, | - | - | - | - | - | - | M 80x2 | - | - |
| 5tiers | - | - | - | - | - | - | - | - | - |
| 0.5gpm-12gpm | - | - | - | - | - | - | - | - | - |
| S6804-2RS | - | - | - | - | - | - | Tr 670x6 | 28 mm | 50 mm |
| 5L-2660 | - | - | - | - | - | - | - | - | - |
| 09269-20006-000 | - | - | - | - | - | - | - | - | - |
| 20 | - | - | - | - | - | - | - | - | - |
| 62012nse | Nachi | - | - | - | - | - | - | - | - |
| ORS323 | Parker | - | - | - | - | - | - | - | - |
| 3.6mm | - | - | - | - | - | - | - | - | - |
| 15mm | - | 13 mm | - | - | - | - | - | - | - |
| TY-101 | - | - | - | - | - | - | M 64x4 | - | - |
| RK6-29P1Z Heavy Duty Slewing Ring Bearing With No Gear | P60°:249 kN; PG:1/4 NPT; H1:133.35 mm; Labyrinth ring:2 x LOR 112; Eye bolt:2 x 3/8-16 UNC; Cap bolt, SAE grade:8; A1:120.65 mm; P120°:94.3 kN; h:46.831 mm; ba:53.181 mm; |
| RE 3510 Crossed Roller Bearing 35x60x10mm | B:129.00 mm; Grease Speed Rating n1:3000 rpm; Angle Third:40 º; Fillet Radius ra:2.50 mm; Oil Speed Rating n2:4000 rpm; Fillet Radius rb:1.00 mm; D:190.0000 mm; d:90.000 mm; Basic Static Radial Load Rating 15 B Bearing Co2:160000 N; Basic Dynamic Radial Load Rating 40 AA Pair C1:325000 N; |
| HS6-16P1Z Bearings | d:75.000 mm; Basic Dynamic Radial Load Rating C:168000 N; Oil Speed Rating n2:3600 rpm; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:140000 N; Accessories:Shield & Seal & Snap; Grease Speed Rating n1:2600 rpm; Sealed Speed Rating n3:2600 rpm; B:68.30 mm; D:160.0000 mm; |
| 231.21.0775.013 Four Contact Ball Slewing Ring 635x838.8x56mm | Mass needle roller and cage assembly:0.018 kg; Limiting speed:14000 r/min; Ew:37 mm; U:13 mm; Basic static load rating C0:25.5 kN; Fatigue load limit Pu:3 kN; Basic dynamic load rating C:14.7 kN; Reference speed:13000 r/min; Fw:32 mm; |
| 91-20 0311/1-07102 Four-point Contact Ball Slewing Bearing With External Gear | Bearing designation:PLC 512-47 ; Static (Cor):8313 ; D:800 mm; B:230 mm; d:560 mm; Dynamic (Cr):3507 kN; Weight:320 ; B1:150 mm; Pu:570.420 kg; |
| RB20025UUCC0 High Precision Cross Roller Ring Bearing | Mass bearing unit:22.9 kg; Limiting speed:700 r/min; S:0.794 mm; J1:57.15 mm; H:217.488 mm; da:93.662 mm; s:41.275 mm; H1:107.95 mm; d2:152.4 mm; A:114.3 mm; |
| PC300-6 Slewing Bearing | Basic Dynamic Radial Load Rating C:16500 N; Accessories:One Seal; Sealed Speed Rating n3:4500 rpm; Fillet Radius ra:1.00 mm; d:60.000 mm; Oil Speed Rating Open/Shielded n2:9000 rpm; Grease Speed Rating Open/Shielded n1:7500 rpm; D:85.0000 mm; B:13.00 mm; Basic Static Radial Load Rating Co:14300 N; |
| RU124X Cross Roller Bearing 80x165x22mm | Accessories:Two Shields & Snap-R; Grease Speed Rating Open/Shielded n1:7700 rpm; D:80.0000 mm; Basic Static Radial Load Rating Co:23600 N; B:21.00 mm; Fillet Radius ra:1.50 mm; Oil Speed Rating Open/Shielded n2:9400 rpm; d:25.000 mm; Basic Dynamic Radial Load Rating C:35800 N; |
| VRT 2080A Cross Roller Table 30x80x12mm | Initial grease fill:141.75 g; P60°:157 kN; Pa:10.9 kN; L:349.25 mm; Housing:FSAFS 518; Da:160 mm; End plug (suffix Y):EPR 11; H1:101.6 mm; h:38.1 mm; Cap bolt recommended tightening torque:149.1 N·m; |
| CRBH4010 Cross Roller Bearing 40x65x10mm | Pu:1020 kN; with cylindrical bore:790 min-1; rs (min):3 mm; Dynamic (Cr):7.5 mm; Static (Cor):13.9 mm; Grease:1850 kN; B:90 mm; with tapered bore:940 min-1; Oil:165.660 kN; d:220 mm; |
75 mm x 130 mm x 25 mm RK6-37N1Z Heavy Duty Slewing Ring Bearing With Internal Gear Video
FAG 6215-2RSR-C3 Deep Groove Ball Bearing, Single Row
FAG 6215-2RSR-C3 Deep Groove Ball Bearing, Single Row, Double Sealed, Steel Cage, C3 Clearance, Metric, 75mm ID, 130mm OD, 25mm Width, 3200rpm
6215 2RSR - FAG Deep Groove - Quality Bearings Online
This 6215 2RSR FAG bearing is a Sealed Deep Groove Radial Ball Bearing with a standard radial internal clearance The bearing's dimensions are 75x130x25
6215 2RSR C3 - FAG Deep Groove - Quality Bearings Online
This 6215 2RSR C3 FAG bearing is a Sealed Deep Groove Radial Ball Bearing with a larger than standard radial internal clearance The bearing's dimensions
FAG | 6215-2RSR | Deep Groove Ball Bearing | Applied
Shop FAG 6215-2RSR at Applied.com, which includes; Deep Groove Bearing Type, 75 mm Inner Diameter, 130 mm Outer Diameter, 25 mm Width
FAG (Schaeffler) - 6215-2RSR - Motion Industries
Buy FAG (Schaeffler) Radial & Deep Groove Ball Bearings 6215-2RSR direct from Motion Industries. Your proven service leader with reliable delivery since
6215 2RSR, FAG, Deep Groove Ball Bearing, Sealed
6215 2RSR, FAG, Deep Groove Ball Bearing, Sealed. Manufacturer: FAG. Seals/Shields: Rubber seals, both sides. Clearance: Standard. Quality: Premium
6215-2RSR FAG Sealed Deep Groove Ball Bearing
6215-2RSR FAG Sealed Deep Groove Ball Bearing 75x130x25mm Deep Groove Metric Ball Bearings are very versatile. Very simple in design being