No. | Brand | C | K | A | T | a | G | h | b |
80*96*90 | - | - | - | - | - | - | - | - | - |
100% | - | - | - | - | - | - | - | - | - |
2 | - | - | - | 114.3 mm | - | - | - | - | - |
3 | - | - | - | - | - | - | - | - | - |
12mm | - | - | - | - | - | - | - | - | - |
[20 | - | - | - | - | - | - | - | - | - |
10pcs | - | - | - | - | - | - | - | - | - |
220g | INA | - | - | - | - | - | - | - | - |
72400 | - | - | - | - | - | - | - | - | - |
WBXU-062 | - | - | - | - | - | - | - | - | - |
310 | John Deere | 15.5 mm | - | - | - | 18 mm | - | - | - |
SL04140-PP | INA | - | - | - | - | - | - | - | - |
24v | - | - | - | - | - | - | - | - | - |
1 | - | - | - | - | - | - | - | - | - |
100pcs | - | 26.187 mm | - | - | - | - | - | - | - |
2007-2008 | NSK | - | - | - | - | - | - | - | - |
N207ECP | SKF | - | - | - | - | - | - | - | - |
120x180x46 | - | - | - | - | - | - | - | - | - |
18mm | - | - | - | - | 29.25 mm | - | - | - | - |
A2f107 | INA | - | - | - | - | 6 mm | - | - | - |
CHD-80 | - | - | 12 mm | - | - | - | - | - | - |
22240 | NSK | - | - | - | - | - | - | - | - |
612121406 | - | - | - | - | - | - | - | - | - |
10mm-80mm | - | - | - | - | - | - | - | - | 22.3 mm |
10x | - | - | - | - | - | - | - | - | - |
C0605 | - | 37 mm | - | - | - | 38.407 mm | - | - | - |
7012CEGAT/VQ253 | - | - | - | - | - | - | - | - | - |
M4-26P4 Angular Contact Ball Slewing Rings | B:25.40 mm; Basic Dynamic Radial Load Rating C:30700 N; Sealed Speed Rating n3:7500 rpm; Grease Speed Rating n1:7500 rpm; Oil Speed Rating n2:10000 rpm; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:20400 N; Accessories:One Shield & Snap-Ri; D:62.0000 mm; d:25.000 mm; |
CRBA12016 Crossed Roller Bearing (120x150x16mm) Industrial Robots Use | Oil:3 800 min-1; d:70 mm; rs Dynamic (Cr):2.1 mm; B:51 mm; D:150 mm; with tapered bore:2314 ; Pu:37.600 kN; Static (Cor):112.270 kN; with cylindrical bore:4 500 min-1; B1:mm; |
HS6-21E1Z Slewing Bearings (17x25.15x2.2inch) With Internal Gear | b1:4.6 mm; dk:66 mm; α:6 °; D:75 mm; Design (sliding contact surface combination):Steel/steel, heavy-d; Basic dynamic load rating C:156 kN; Specific dynamic load factor K:100 N/mm²; M:3 mm; B:35 mm; Mass plain bearing:0.56 kg; |
NRXT40040E Crossed Roller Bearing 400x510x40mm | Da max.:134 mm; Calculation factor Y0:0.8; Db min.:139 mm; Calculation factor e:0.44; db min.:109 mm; r1,2 min.:6 mm; Cb min.:8 mm; d:90 mm; C:27 mm; Calculation factor Y:1.35; |
231.20.0600.013 Four Contact Ball Slewing Ring 534x742.8x56mm | B:21.00 mm; Grease Speed Rating Open/Shielded n1:9000 rpm; d:25.000 mm; Fillet Radius ra:1.50 mm; Accessories:One Shield & Snap-Ri; Basic Dynamic Radial Load Rating C:35800 N; Basic Static Radial Load Rating Co:19300 N; Oil Speed Rating Open/Shielded n2:11000 rpm; Sealed Speed Rating n3:6400 rpm; D:80.0000 mm; |
9O-1B35-0430-0537 Four Point Contact Ball Slewing Ring | Da max.:91.4 mm; Axial load factor Y:0.4; D1 ≈:85.7 mm; Calculation factor kr:0.2; Basic dynamic load rating C:114 kN; Fatigue load limit Pu:15.3 kN; d1 ≈:70.8 mm; Limiting value e:0.3; da min.:63 mm; d:55 mm; |
1797/2500G2K Slewing Beairng | Mass housing washer:1.4 kg; B:13 mm; r1,2 min.:1.5 mm; D:190 mm; D1:133 mm; |
023.40.1800 Slewing Bearing | dk:49.2 mm; Design (sliding contact surface combination):Steel/steel; Material constant KM:330; r2 min.:1 mm; D:55.563 mm; Specific static load factor K0:300 N/mm²; C:26.187 mm; Da max.:51.7 mm; r1 min.:0.6 mm; B:30.15 mm; |
CRB20025UU High Precision Cross Roller Ring Bearing | C2:1.95 mm; Static axial stiffness, preload class C:153 N/µm; Preload class C GC:480 N; Calculation factor (back-to-back, face-to-face) Y1:0.92; Calculation factor (single, tandem) Y2:0.87; r3,4 min.:0.6 mm; Calculation factor f2B:1.03; Static axial stiffness, preload class B:117 N/µm; B:13 mm; Ball diameter Dw:6.35 mm; |
CRB5013UU High Precision Cross Roller Ring Bearing | B:43.00 mm; Grease Speed Rating n1:3400 rpm; d:90.000 mm; Sealed Speed Rating n3:2400 rpm; Grease Speed Rating Open/Shielded n1:3400 rpm; Oil Speed Rating Open/Shielded n2:4000 rpm; Fillet Radius ra:2.50 mm; Accessories:One Shield; Basic Static Radial Load Rating Co:108000 N; D:190.0000 mm; |
RK6-25N1Z Heavy Duty Slewing Ring Bearing With Internal Gear Video