| No. | Brand | C | K | A | T | a | G | h | b |
| HPIB020 | - | - | - | - | - | - | - | - | - |
| 20 | - | - | - | - | - | - | - | - | - |
| 1PC | - | - | - | - | - | - | - | - | - |
| SK210-6 | INA | - | - | - | - | - | - | - | 22.3 mm |
| (TD5091) | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| D1VW020DNJDLGJ582 | Parker | - | - | - | - | - | - | - | 22.3 mm |
| 15mm | - | - | - | - | - | - | - | - | - |
| 6205N | fag | - | - | - | - | - | - | - | - |
| 140K | - | - | - | - | - | - | - | - | - |
| 4132-2CS5V | SKF | - | - | - | - | - | - | - | - |
| 310 | John Deere | 15.5 mm | - | - | - | 18 mm | - | - | - |
| DGMDC5YBK30J | TOKIMEC | - | - | - | - | - | - | - | - |
| JSP-G02-4CA-20 | DAIKIN | - | - | - | - | - | - | - | - |
| TLAW3038Z | IKO | - | - | - | - | - | - | - | - |
| 600 | - | - | - | - | - | - | - | - | - |
| 100% | - | - | - | - | - | - | Tr 220x4 | 9 mm | 20 mm |
| ec290 | - | - | - | - | - | - | - | - | - |
| 2007-2010 | Timken | - | - | - | - | - | - | - | - |
| SHS55LRUUF | thk | - | - | - | - | - | - | - | - |
| Pve21 | - | - | - | - | - | - | 159.614 mm | - | - |
| 40% | - | - | - | - | - | - | - | - | - |
| 5 | - | 121 mm | 4 mm | - | - | - | - | - | - |
| 4'X8' | - | 9.25 mm | - | - | - | 8.308 mm | - | - | - |
| VU 200220 Four Point Contact Slewing Ring Slewing Bearing | Material constant KM:330; d2 max.:94 mm; l7 min.:46 mm; Basic static load rating C0:140 kN; r1 min.:0.6 mm; h:150 mm; G:M 39x3; l1 min.:86 mm; d:40 mm; α:6 °; |
| 17972500G2K2 Bearing 2500x3258x260mm | Calculation factor Y0:2.2; G1:15 mm; D:225 mm; r1,2 min.:2.1 mm; d1:145 mm; K:3 mm; Limiting speed:2600 r/min; Fatigue load limit Pu:100 kN; D1 ≈:197 mm; G:M 155x3; |
| VSI 200844-N Four Point Contact Slewing Ring | Oil:4 200 min-1; Static (Cor):92.600 kN; Da:169 max; Grease:3 500 min-1; ra:2 max; Dynamic (Cr):123.000 kN; Weight:3.13 kg; da:112 min; B:34 mm; Pu:3.557 kN; |
| 81N6-00021 Slewing Bearing For HYUNDAI ROBEX 205-7 Excavator | Accessories:Two Seals & Snap-Rin; D:210.0000 mm; B:52.00 mm; Oil Speed Rating Open/Shielded n2:3800 rpm; Grease Speed Rating Open/Shielded n1:3200 rpm; Fillet Radius ra:3.00 mm; Basic Static Radial Load Rating Co:137000 N; d:85.000 mm; Basic Dynamic Radial Load Rating C:174000 N; Sealed Speed Rating n3:2200 rpm; |
| KH-275E Slewing Bearings (23.5x31.667x2.5inch) Machine Tool Bearing | Pa:46.3 kN; H2:76.2 mm; Bearing:22236 CCK/W33; Cap bolt:1-8 UNC; PG:1/4 NPT; A1:180.975 mm; J1:117.475 mm; P120°:196 kN; P90°:320 kN; RG:3/4 NPT; |
| RE15013 Cross Roller Bearings,RE15013 Bearings150x180x13mm | Specific dynamic load factor K:10 N/mm²; Permissible sliding velocity v min.:0.25 m/s; Tolerance housing:H7; d:80 mm; Coefficient of friction µ min.:0.05; Specific static load factor K0:20 N/mm²; D:95 mm; Coefficient of friction µ max.:0.1; B:100 mm; Tolerance shaft:h8; |
| 792/1000G2K Bearing 1000x1270x100mm | d1:152.4 mm; B1:122.86 mm; B4:30.963 mm; Hydraulic nut:HMVC 34E; d3 max.:219.989 mm; Mass adapter sleeve assembly:8.85 kg; Lock nut:AN 34; Lock washer:W 34; B:27.254 mm; G:169.139 mm; |
| VSU200844 Slewing Bearing / Four Point Contact Bearing 772x916x56mm | Weight:0.597 kg; B:14 mm; Static (Cor):31.600 kN; Pu:1.419 kN; Da:121 max; rs:0.6 mm; da:84 min; ra:0.6 max; d:80 mm; Bearing designation:16016 ; |
| RE50050 Cross Roller Bearings,RE50050 Bearings SIZE 500x625x50mm | J:99 mm; H:124 mm; s1:26.9 mm; A1:15 mm; A3:3.2 mm; d:25 mm; Basic static load rating C0:7.8 kN; Housing:FYTBK 505; Da:63.5 mm; Recommended tightening torque for grub screw:4 N·m; |
| 91-32 1155/1-06135 Four-point Contact Ball Slewing Bearing With External Gear | Basic Radial Load Rating-Dynamic DC:39000 N; Basic Radial Load Rating-Static SCO:26000 N; Speed Rating-Open and Shielded-Grease OSG:19500 rpm; D:80.0000 mm; Fillet Radius ra:1.50 mm; d:35.000 mm; Speed Rating-Open and Shielded-Oil OSO:28000 rpm; Fillet Radius rb:1.00 mm; Type:300-RDM Series (from; B:21.00 mm; |
RB1000110 Precision Cross Roller Bearing Video