No. | Brand | C | K | A | T | a | G | h | b |
3/4 | - | - | - | - | - | - | - | - | - |
21mm | - | - | - | - | - | - | - | - | - |
Sk350 | INA | - | - | - | - | - | - | - | - |
208K | Timken | - | - | - | - | - | - | - | - |
95x170x32 | - | - | - | - | - | - | - | - | - |
840 | - | - | - | - | - | - | - | - | - |
30TAC62BSUC10PN7B | NSK | - | - | - | - | - | - | - | - |
10 | - | - | - | - | - | - | - | - | - |
031733075 | - | - | - | - | - | - | - | - | - |
41.62044 | Nachi | - | - | - | - | - | - | - | - |
6018-2NSL | Nachi | - | 4.5 mm | - | - | - | - | - | - |
4L | - | - | - | - | - | - | - | - | - |
9mm | - | - | - | - | - | - | - | - | - |
100cc | - | - | - | - | - | - | - | - | - |
6x13x5mm | - | - | - | - | - | - | - | - | - |
1980-1983 | Timken | - | - | - | - | - | - | - | 22.3 mm |
2003 | NSK | - | - | - | - | - | - | - | - |
21%) | - | - | - | - | - | - | - | - | - |
1312-TVH | fag | - | - | - | - | - | - | - | 2.6 mm |
R902460867 | Rexroth | - | - | - | - | - | - | - | - |
2014 | - | 486 mm | - | - | - | - | - | - | - |
13mm | - | - | - | - | - | - | - | - | - |
4 | - | - | - | - | - | - | - | - | - |
10pcs | - | - | - | - | 400.05 mm | - | - | - | - |
394 | koyo | - | - | - | - | - | - | - | - |
6308/VA201 | SKF | - | - | - | - | - | - | - | - |
(4 | - | - | - | - | - | - | - | - | - |
Mk4 | - | - | - | - | - | - | - | - | - |
GTFE12-00-260 | - | - | - | - | - | - | - | - | - |
3735 | Timken | - | - | - | - | - | - | - | - |
NRXT2508DD/ Crossed Roller Bearings (25x41x8mm) Industrial Robots Bearing | Basic static load rating C0:1220 kN; d1:125 mm; Mass bearing + sleeve:28.9 kg; Ca min.:-7.5 mm; B:93 mm; s1 max.:31.2 mm; da max.:201 mm; Da max.:263 mm; Misalignment factor k1:0.093; Operating clearance factor k2:0.122; |
SD.1500.32.00.C Four Contact Ball Slewing Ring 1205x1500x90mm | B:61.90 mm; Grease Speed Rating n1:3200 rpm; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:138000 N; d:65.000 mm; Oil Speed Rating n2:4300 rpm; Basic Static Radial Load Rating Co:108000 N; D:140.0000 mm; Accessories:Shield & Seal & Snap; Sealed Speed Rating n3:3200 rpm; |
VOLVO290 Slewing Bearing | Static (Coa):114 kN; s:1.5 mm; b1:15.5 mm; Pu:13.900 kN; d2 (max):85.3 mm; rs (min):2.1 mm; d2:60 mm; b:9 mm; Dynamic (Ca):121 kN; E:113 mm; |
130.45.2500 Slewing Bearing | Fillet Radius ra:3.00 mm; B:116.00 mm; Basic Static Radial Load Rating Co:695000 N; d:130.000 mm; Basic Dynamic Radial Load Rating C:475000 N; Grease Speed Rating n1:1800 rpm; Oil Speed Rating n2:2200 rpm; Fillet Radius rb:1.00 mm; D:280.0000 mm; |
120.40.2500 Slewing Bearing | D:130.0000 mm; Oil Speed Rating n2:16000 rpm; Fillet Radius rb:0.60 mm; Basic Dynamic Radial Load Rating C:47500 N; Basic Static Radial Load Rating Co:52000 N; d:95.000 mm; B:18.00 mm; Fillet Radius ra:1.00 mm; Grease Speed Rating n1:11000 rpm; |
1797/3230G Slewing Beairng | Bearing limiting speed:4000 r/min; Initial grease fill:181.44 g; L:387.35 mm; Da:180 mm; Mass pillow block:28.6 kg; Labyrinth ring:2 x LOR 114; H2:44.45 mm; P120°:50.7 kN; h:39.688 mm; Adapter sleeve assembly:SNW 3024x4.1/4; |
Komatsu PC300LL-7 Excavator Part Number 208-25-61100 Swing Bearing | B:82 mm; l1:40 mm; Corrosion protection:Zinc-coated housing; Purpose/ Application:Tillage; Minimum disc diameter min.:300 mm; Sealing system:SKF Mudblock seal; Recommended maximum temperature max.:50 °C; Basic dynamic load rating C:52.7 kN; s:3.9 mm; Mass:4.36 kg; |
A8-30E8D Four Point Contact Ball Slewing Bearing With External Gear | G:Tr 280x4; Fatigue load limit Pu:325 kN; D:540 mm; ra max.:5 mm; d2 ≈:328 mm; Calculation factor Y0:2.2; Reference speed:850 r/min; da min.:276 mm; Basic static load rating C0:4550 kN; Calculation factor Y1:2.2; |
PC360-7 Slewing Bearing | Specific dynamic load factor K:40 N/mm²; Coefficient of friction µ min.:0.08; Specific static load factor K0:120 N/mm²; D:60 mm; B:40 mm; Coefficient of friction µ max.:0.15; d:55 mm; Permissible sliding velocity v max.:1 m/s; Permissible sliding velocity v min.:0 m/s; Tolerance housing:H7 m/s; |
RU228(G) Cross Roller Bearing 160x295x35mm | Basic static load rating C0:200 kN; d2 max.:104 mm; α:7 °; d:45 mm; C1 max.:28 mm; h:165 mm; l1 min.:95 mm; Basic dynamic load rating C:127 kN; G:M 45x3; dk:60 mm; |
RB90070 Precision Cross Roller Bearing Video
LGHP 2 SKF high performance, high temperature bearing
SKF LGHP 2 is a premium quality mineral oil based grease, using a modern Polyurea (di-urea) thickener. It is suitable for electric motors and similar applications
Ball bearing plummer block units - sy 2. tf
Thread grub screw, G2, 3/8-24 UNF. Hexagonal key size for grub screw, N, 4.763, mm. Recommended tightening torque for grub screw, 16.5, N·m
Roller bearing pillow block units, for inch shafts
d2, 111.125, mm. A, 68.263, mm. A1, 95.25, mm. B, 92.075, mm. H, 165.894, mm. H1, 82.55, mm. H2, 57.15, mm. L, 265.113, mm. J, max. 223.838, mm. J, min
Deep groove ball bearings - W 617/2
W 617/2. Dimensions. d, 2, mm. D, 4, mm. B, 1.2, mm. d1, ≈, 2.55, mm. D1, ≈, 3.45, mm. r1,2, min. 0.05, mm. Abutment dimensions. da, min. 2.5, mm. Da, max
SKF High load food grade grease LGFQ 2
High load, water resistant and wide temperature food grade grease. ... SKF LGFQ 2 is a synthetic oil based grease using the latest complex calcium sulphonate thickener technology. It is suitable for applications subjected to high loads, wet environment and fluctuating temperatures
Roller bearing square flanged units, for inch shafts - FYE-2
da, 50.8, mm. d2, 73.819, mm. A, 57.15, mm. A1, 75.406, mm. A5, 27.781, mm. A6, 19.05, mm. B, 73.025, mm. a, 2.381, mm. J, 107.95, mm. L, 139.7, mm
LGWM 2 SKF High load, wide temperature bearing ...
SKF LGWM 2 is a synthetic-mineral oil based grease using the latest complex calcium sulphonate thickener technology. It is suitable for applications subjected