No. | Brand | C | K | A | T | a | G | h | b |
6208-2RS | - | - | - | - | - | - | - | - | - |
LR606-RSR-HLC, | INA | - | - | - | - | - | - | - | - |
950 | - | - | - | - | - | - | - | - | - |
6215-ZZ | - | - | - | - | - | - | - | - | - |
Y3 | - | - | - | - | - | - | - | 73.025 mm | - |
NU2207ET2X | NTN | - | - | - | - | - | - | - | - |
1608 | - | - | - | - | - | - | - | - | - |
6.0mm, | - | - | - | - | - | - | - | - | - |
SK60-5 | - | - | - | - | - | - | - | - | - |
4'x8'x2" | - | - | - | - | - | - | - | - | - |
A11vlo260 | Rexroth | - | - | - | - | - | - | 20 mm | 36 mm |
10x19x5mm, | - | - | - | - | - | - | - | - | - |
PC35 | - | - | - | - | - | - | - | - | - |
NPK12-1-2,npk12-3-3,npk12-0-3,npk10-45,npk10-0-4,npk5-45 | - | - | - | - | - | - | - | - | - |
As6669 | - | - | - | - | - | - | - | - | - |
OR350 | - | - | - | - | - | - | 139.624 mm | - | - |
3x8x3 | - | - | - | - | - | - | - | - | - |
22309-E1-C3 | fag | - | - | - | - | - | - | - | - |
NZE140 | - | - | - | - | - | - | - | - | - |
A-A1935 | - | - | - | - | - | - | - | - | - |
#F400B | Parker | - | - | - | - | - | - | - | - |
Listing23PC | - | - | - | - | - | - | - | - | - |
50 | - | - | - | - | - | - | M 100x2 | - | - |
18mm | - | 53 mm | - | - | - | - | - | - | - |
CRBC 10020 Crossed Roller Bearings 100x150x20mm Industrial Robots Arm Use | Mass bearing:2.16 kg; ra max.:2 mm; D:140 mm; d:80 mm; Axial load factor Y:0.4; D1 ≈:122.4 mm; Reference speed:5300 r/min; Fatigue load limit Pu:31 kN; Calculation factor kr:0.3; da max.:93 mm; |
PC100-5 Slewing Bearing | r, r1,2 min.:1 mm; F:50 mm; d:40 mm; Mass inner ring:0.11 kg; B:20 mm; |
2797/2680G Bearing 2680x3325x300mm | D1 ≈:755 mm; Basic static load rating C0:6200 kN; d1 ≈:895 mm; Minimum load factor A:210; Da max.:814 mm; Fatigue load limit Pu:80 kN; Basic dynamic load rating C:741 kN; ra max.:3 mm; H:90 mm; Mass bearing (including seat washer where applicable):105 kg; |
RU 178G Crossed Roller Bearing 115x240x28mm | l3 min.:65 mm; dk:60 mm; α:7 °; Mass rod end:3.2 kg; l4 max.:199 mm; d2 max.:104 mm; Material constant KM:330; Specific dynamic load factor K:100 N/mm²; d:45 mm; r1 min.:0.6 mm; |
014.40.1000 Slewing Bearing | Basic Dynamic Radial Load Rating C:291000 N; Sealed Speed Rating n3:1700 rpm; Fillet Radius ra:2.50 mm; Oil Speed Rating n2:2400 rpm; D:240.0000 mm; B:92.10 mm; Grease Speed Rating n1:1700 rpm; Basic Static Radial Load Rating Co:305000 N; Accessories:Two Shields & Snap-R; d:110.000 mm; |
Produce RE50040 Crossed Roller Bearings500x600x40mm | d:50.000 mm; Basic Dynamic Radial Load Rating C:61800 N; B:27.00 mm; Accessories:Seal & Snap-Ring; Fillet Radius ra:2.00 mm; D:110.0000 mm; Oil Speed Rating n2:7500 rpm; Grease Speed Rating Open/Shielded n1:6300 rpm; Oil Speed Rating Open/Shielded n2:7500 rpm; Basic Static Radial Load Rating Co:38000 N; |
NRXT50040E Crossed Roller Bearing 500x600x40mm | Limiting speed:30000 r/min; Reference speed:26000 r/min; Fw:12 mm; U:13 mm; Mass needle roller and cage assembly:0.0023 kg; Basic static load rating C0:8.65 kN; Basic dynamic load rating C:6.16 kN; Ew:15 mm; Fatigue load limit Pu:0.98 kN; |
RB6013UUCC0 High Precision Cross Roller Ring Bearing | Oil Speed Rating Open/Shielded n2:1400 rpm; Basic Dynamic Radial Load Rating C:371000 N; d:320.000 mm; Basic Static Radial Load Rating Co:540000 N; Fillet Radius ra:3.00 mm; Accessories:Two Seals; B:74.00 mm; Sealed Speed Rating n3:730 rpm; Grease Speed Rating Open/Shielded n1:1100 rpm; D:480.0000 mm; |
RU 124G Crossed Roller Bearing 80x165x22mm | db min.:136.5 mm; a:47.2 mm; Ca min.:8 mm; Db min.:237 mm; Cb min.:13.5 mm; ra max.:4 mm; Calculation factor Y0:0.9; B:55 mm; rb max.:3 mm; r1,2 min.:4 mm; |
RA14008 Crossed Roller Bearings 140x156x8mm | B2:176 mm; A:9 mm; Hydraulic nut:HMV 76 E; d:360 mm; Nut for removal:HM 3076; d1:340 mm; G1:30 mm; B1:167 mm; Mass withdrawal sleeve:21 kg; G2:G 1/4; |
RB40035 Precision Cross Roller Bearing Video