| R11-75N3 Crossed Roller Slewing Rings With Internal Gear | H:71 mm; Limiting speed:1500 r/min; N:17.5 mm; Basic dynamic load rating C:14 kN; J max.:110 mm; Housing material:Composite; Basic static load rating C0:7.8 kN; J min.:100 mm; A1:22 mm; Thread grub screw G2:M5; |
| 91-20 0411/1-07112 Four-point Contact Ball Slewing Bearing With External Gear | with cylindrical bore:1 900 min-1; Dynamic (Cr):4.5 mm; Oil:57.550 kN; d:90 mm; rs (min):3 mm; Pu:437 kN; B:64 mm; Static (Cor):8.3 mm; D:190 mm; Grease:522 kN; |
| XSU080168 Cross Roller Bearings,XSU080168 Bearings SIZE 130X205X25.4mm | B4:17.704 mm; d3 max.:112.039 mm; G:84.836 mm; B:16.129 mm; Sleeve:S 17x2.13/16; B1:62.89 mm; d1:71.438 mm; Mass adapter sleeve assembly:1.3 kg; d:85 mm; Hydraulic nut:HMVC 17E; |
| 024.40.2500 Slewing Bearing | G:M 100x2; B:21 mm; B3:4 mm; Recommended grub screw tightening torque:18 N·m; b:10 mm; Associated spanner:HN 18-20; h:4 mm; Mass lock nut:0.8 kg; d3:130 mm; Axial static load carrying capacity:255 kN; |
| SHG(SHF)-17 Cross Roller Bearing, Harmonic Drive Bearing, Harmonic Reducer Bearing, Robot Bearing | Permissible sliding velocity v min.:0.25 m/s; Tolerance housing:H7; B:70 mm; Coefficient of friction µ max.:0.1; Permissible sliding velocity v max.:5 m/s; Coefficient of friction µ min.:0.05; d:50 mm; D:70 mm; Mass bushing:0.81 kg; Specific static load factor K0:20 N/mm²; |
| 123.50.4500 Slewing Bearing | L:167.488 mm; B:3.969 mm; A3:42.875 mm; A1:39.675 mm; Hexagonal head bolts:2 x 5/8-11x1-1/4; Mass locking plate:0.32 kg; A2:25.375 mm; |
| 136-2978 Swing Bearing For Caterpillar 365BL Excavator | B:26.00 mm; Basic Radial Load Rating-Static SCO:73500 N; Speed Rating-Open and Shielded-Grease OSG:10300 rpm; Fillet Radius ra:2.00 mm; Fillet Radius rb:1.00 mm; Speed Rating-Open and Shielded-Oil OSO:14800 rpm; Basic Radial Load Rating-Dynamic DC:85200 N; d:80.000 mm; D:140.0000 mm; Type:200-RDM Series (from; |
| 110.40.2500.12 Bearing 2325x2678x112mm | Basic Static Radial Load Rating Co:38000 N; B:41.00 mm; Basic Dynamic Radial Load Rating C:97500 N; Fillet Radius ra:2.50 mm; d:85.000 mm; Grease Speed Rating n1:3400 rpm; D:180.0000 mm; Oil Speed Rating n2:4000 rpm; |
| 013.60.2240 Geared Grab And Crane Slewing Bearing | Accessories:One Seal & Snap-Ring; Grease Speed Rating n1:3800 rpm; Fillet Radius ra:2.00 mm; B:52.40 mm; Oil Speed Rating n2:5000 rpm; Basic Dynamic Radial Load Rating C:119000 N; d:55.000 mm; D:120.0000 mm; Sealed Speed Rating n3:3800 rpm; Basic Static Radial Load Rating Co:122000 N; |
| RB80070 Cross Roller Bearing 800x950x70mm | P90°:82.7 kN; A2:133.35 mm; Da:140 mm; Mass pillow block:21.3 kg; Cap bolt, SAE grade:8; Cap bolt:2 x 5/8-11 UNC; Labyrinth ring:2 x LOR 43; R1:53.181 mm; PG:1/8 NPT; End plug (suffix Y):EPR 8; |