No. | Brand | C | K | A | T | a | G | h | b |
404 | - | - | - | - | - | - | - | - | - |
PUMP_PVP48303R6A2M | Parker | - | - | - | - | - | - | - | - |
2mm | - | - | - | - | - | - | - | - | - |
JLM104910/LM104949 | koyo | - | - | - | - | - | - | - | - |
6024 | NSK | - | - | - | - | - | - | - | - |
41.32005 | Nachi | - | - | - | - | - | - | - | - |
IP65 | - | - | - | - | - | - | - | - | - |
DH55 | INA | - | - | - | - | - | M 36x3 | 130 mm | - |
M-1225-B | - | - | - | - | - | - | M 120x2 | - | - |
(2 | - | - | - | - | - | - | - | - | - |
2040 | John Deere | - | - | - | - | - | - | - | - |
4140 | - | - | 9 mm | - | - | - | - | - | - |
25X52X15 | - | - | - | - | - | - | - | - | - |
2PCS | - | - | - | - | - | - | - | - | - |
560x750X140 | - | - | - | 9 mm | - | - | - | - | - |
1K10-6-12 | Parker | - | - | - | - | - | - | - | - |
285A | - | - | - | - | - | - | - | - | - |
3182600225 | - | 18 mm | - | - | 22.25 mm | - | - | - | - |
900 | NTN | - | - | - | - | - | - | - | - |
TD601017 | - | - | - | - | - | - | Tr 800x7 | - | - |
8FG6-10-271 | - | - | - | - | - | - | - | - | - |
1797/3230G2Y5 Bearing 3230x4100x240mm | Calculation factor f1:0.99; d1:43.7 mm; Preload class C GC:590 N; Attainable speed for grease lubrication:31000 r/min; a:18.4 mm; B:14 mm; db min.:39.6 mm; r3,4 min.:0.6 mm; d:35 mm; Calculation factor (back-to-back, face-to-face) Y2:1.41; |
111.50.3550 Slewing Bearing | A:30 mm; A5:18 mm; End cover:ECY 205; Recommended diameter for attachment bolts, inch G:0.375 in; d:25 mm; RG:1/4-28 UNF; Bearing:YSPAG 205; Db2:71 mm; J7:19 mm; J6:83 mm; |
20Y-25-11103 Swing Bearing For Komatsu PC210LC-5K Excavator | P90°:30.2 kN; h:27.781 mm; R2:15.875 mm; J min.:206.375 mm; Appropriate attachment bolt size G:0.625 in; R1:44.45 mm; Cap bolt recommended tightening torque:81.3 N·m; Taconite seal:TER 30; Pa:6.09 kN; P60°:50.3 kN; |
17 mm x 40 mm x 12 mm VSU250755 Slewing Bearing / Four Point Contact Bearing 655*855*63mm | rs (min):4 mm; D:300 mm; Dynamic (Cr):7.5 mm; d:140 mm; Static (Cor):13.9 mm; Pu:993 kN; with tapered bore:1 500 min-1; Oil:122.250 kN; Grease:1270 kN; with cylindrical bore:1 200 min-1; Size (mm):17 mm x 40 mm x 12 mm ; |
Excavator Slewing Ring For KOMATSU PC210-5K, Part Number:20Y-25-11103 | Width A:1.3750 in; Dimension G:0.5000 in; Shaft Diameter D:1 7/16 in; Dimension C:3.5000 in; Dimension J:0.3125 in; Weight W:1.60 lb; Basic Dynamic Radial Load Rating:5730 lbf; Dimension S1:1.0000 in; Pin Dia A1:0.2500 in; Basic Static Radial Load Rating Co:3440 lbf; |
MTO-210T Heavy Duty Slewing Ring Bearing | Housing:SSAFS 038 KA; ba:69.85 mm; P90°:207 kN; Initial grease fill:793.8 g; L:558.8 mm; Cap bolt recommended tightening torque:813.5 N·m; H:338.137 mm; Pa:42.9 kN; Stabilizing ring:2 x 38151-38; RG:3/4 NPT; |
VLA200844N ZT Four Contact Ball Slewing Ring 734x950.1x56mm | D:200 mm; Operating clearance factor k2:0.103; s1 max.:11.1 mm; da max.:150 mm; B:53 mm; r1,2 min.:2.1 mm; Fatigue load limit Pu:64 kN; Reference speed:3200 r/min; G:M 120x2; Mass bearing + sleeve:7.65 kg; |
I.1500.32.00.C Four Contact Ball Slewing Ring 1212x1500x90mm | Lw:23.8 mm; r2 max.:0.8 mm; Dw:3 mm; r1,2 min.:0.2 mm; Mass needle roller:1.32 g; r1 max.:0.6 mm; |
CRBA06013 Crossed Roller Ring (60x90x13mm) Precision Robotic Arm Use | H:217.488 mm; H1:107.95 mm; Mass bearing unit:22.9 kg; H2:61.913 mm; Limiting speed:2200 r/min; s:41.275 mm; A1:133.35 mm; A:114.3 mm; Basic dynamic load rating C:311 kN; d2:152.4 mm; |
17972500G2K3 Bearing 2500x3258x260mm | Grease Speed Rating Open/Shielded n1:5300 rpm; Fillet Radius ra:1.00 mm; B:13.00 mm; Basic Dynamic Radial Load Rating C:19500 N; Oil Speed Rating Open/Shielded n2:6300 rpm; Accessories:One Seal; Basic Static Radial Load Rating Co:20400 N; Sealed Speed Rating n3:3200 rpm; D:115.0000 mm; d:90.000 mm; |
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
VLU200944 Four Point Contact Slewing Ring Video