| 78992 Slewing Bearing | Appropriate attachment bolt size G:1.25 in; P90°:334 kN; Cap bolt recommended tightening torque:2467.6 N·m; H:419.1 mm; Labyrinth ring:2 x LOR 552; R1:122.237 mm; Initial grease fill:2154.6 g; J max.:635 mm; Bearing limiting speed:1900 r/min; Ca:107.798 mm; |
| 209-25-11101 Swing Bearing For Komatsu PC650LC-3 Excavator | D1 ≈:1080 mm; Calculation factor e:0.33; D:1219.1 mm; Calculation factor Y1:2; Calculation factor Y0:2; B:876.3 mm; Basic dynamic load rating C:28100 kN; Basic static load rating C0:81500 kN; Comparative radial load rating CF:7500 kN; d1 ≈:935 mm; |
| 32 mm x 73 mm x 54 mm Komatsu PC70 Excavator Slewing Bearing | da:150 mm; Labyrinth ring (dc shaft position):LOR 134; H1:190.5 mm; H:377.825 mm; N1:28.575 mm; Stabilizing ring:SR-36-30; Eye bolt:2 x 3/8-16 UNC; J min.:530.225 mm; dc:146.05 mm; Pa:57.8 kN; Size (mm):32 mm x 73 mm x 54 mm ; |
| Cross Roller Bearing 615897A Thrust Tapered Roller Bearing 1270x1524x95.25mm | Basic Dynamic Radial Load Rating C:22500 N; Fillet Radius ra:1.00 mm; Oil Speed Rating n2:12000 rpm; d:20.000 mm; Sealed Speed Rating n3:8500 rpm; Basic Static Radial Load Rating Co:14600 N; Grease Speed Rating n1:8500 rpm; D:52.0000 mm; Accessories:One Shield; B:22.20 mm; |
| 797/1060G2 Slewing Bearing | r3,4 min.:0.3 mm; Calculation factor f2B:1.04; Reference grease quantity Gref:2.85 cm³; Basic dynamic load rating C:19.5 kN; Attainable speed for grease lubrication:13000 r/min; Fatigue load limit Pu:0.68 kN; Calculation factor f1:0.98; Ball diameter Dw:7.938 mm; Calculation factor f2A:1; d:65 mm; |
| CRBE 11528 C Cross Cylindrical Roller Bearing 115x240x28mm | Oil Speed Rating n2:4300 rpm; D:160.0000 mm; d:100.000 mm; Grease Speed Rating n1:2600 rpm; Basic Dynamic Radial Load Rating C:85200 N; B:28.00 mm; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:86500 N; Fillet Radius rb:1.00 mm; |
| R9-63N3 Crossed Roller Slewing Rings With Internal Gear | P150°:185 kN; Cap bolt recommended tightening torque:2467.6 N·m; P180°:222 kN; H2:85.725 mm; P60°:557 kN; Ca:107.798 mm; P90°:334 kN; Da:359.999 mm; A1:203.2 mm; N1:34.925 mm; |
| RK6-43E1Z Heavy Duty Slewing Ring Bearing With External Gear | Cap bolt, SAE grade:8; da:80.963 mm; Cap bolt:1/2-13 UNC; Pa:10.9 kN; Bearing:22218 EK; R2:27.781 mm; Mass pillow block:31.3 kg; End plug (suffix Y):EPR 11; P120°:53.4 kN; Initial grease fill:141.75 g; |
| A10-110P2D Four Point Contact Ball Slewing Bearings SLEWING RINGS | s1 max.:14.1 mm; Limiting speed:1000 r/min; r1,2 min.:2.1 mm; Fatigue load limit Pu:93 kN; B:56 mm; Misalignment factor k1:0.113; Operating clearance factor k2:0.108; B2 ≈:77 mm; Mass bearing + sleeve:8.9 kg; da max.:190 mm; |
| R210-5 Bearings | Ca:107.798 mm; H2:85.725 mm; Mass pillow block:195 kg; J1:127 mm; L:749.3 mm; h:62.706 mm; da:180.975 mm; Eye bolt:2 x 1/2-13 UNC; Cap bolt, SAE grade:5; R1:122.237 mm; |