No. | Brand | C | K | A | T | a | G | h | b |
1312K | - | - | - | - | - | - | - | - | - |
8 | - | - | - | - | - | - | - | - | - |
3racing | - | - | - | - | - | - | - | - | - |
4 | - | - | - | - | - | - | - | - | - |
10 | - | - | - | - | - | - | - | - | - |
6.38mm | INA | 70 mm | - | - | - | - | - | - | 6 mm |
6908-2RS | - | - | - | - | - | - | - | - | - |
825 | - | - | - | - | - | - | - | - | - |
828 | - | - | - | - | - | - | - | - | 4 mm |
28-30% | - | - | - | - | - | - | - | - | - |
880 | - | - | - | - | - | - | - | - | - |
4JJ1 | - | - | - | - | - | - | - | - | - |
310 | John Deere | 15.5 mm | - | - | - | 18 mm | - | - | - |
600 | - | - | - | - | - | - | - | - | - |
S6205 | - | - | - | - | - | - | - | - | 22.3 mm |
PM-WH13X10025 | - | - | - | - | - | - | - | - | - |
N2219EM | - | - | - | - | - | - | - | - | - |
60 | - | - | - | - | - | - | - | - | - |
500 0249 11 | - | - | - | - | - | - | - | - | - |
99.5 | - | - | - | - | - | - | - | - | - |
99.5 | - | - | - | - | - | - | - | - | - |
100% | - | - | - | - | - | - | - | - | - |
6213ZZ | fag | - | - | - | - | - | M 95x2 | - | - |
50% | - | - | - | - | - | - | - | - | - |
20/925080 | Rexroth | - | - | - | - | - | - | - | - |
6006ZZ | NSK | - | - | - | - | 22.1 mm | - | - | - |
15mm, | - | - | - | - | - | - | M 80x2 | - | - |
18mm | - | - | - | - | - | - | - | - | - |
1991-1999 | koyo | - | - | - | - | - | - | - | - |
6848 | NSK | - | - | - | - | - | 499.008 mm | - | - |
YRTM200 Rotary Table Bearing 200x300x45mm | T:42.25 mm; d2:50 mm; r2s (min):0.6 mm; r1s (min):2 mm; C:33 mm; a:33 mm; Dynamic (Ca):156 kN; Static (Coa):212 kN; rs (min):2.5 mm; Pu:25.850 kN; |
CRBC 10016 Crossed Roller Bearings 100x140x16mm Industrial Robots Arm Use | Basic Radial Load Rating-Static SCO:2400 N; Basic Interchange NDH:8500; Basic Interchange FAF:200KL; Speed Rating-Single and Double Sealed Grease SDG:17000 rpm; Fillet Radius ra:0.64 mm; Accessories:8000 One Seal; Old MRC Bearing Number:200FS; Width - Overall B:12.7 mm; d:10.000 mm; Width - Inner Ring B1:12.20 mm; |
SK260-8 Slewing Bearing | Basic static load rating C0:405 kN; C:17.5 mm; Minimum load factor A:1.1; Basic dynamic load rating C:174 kN; Da max.:115 mm; d:85 mm; R:112 mm; D:150 mm; da min.:124 mm; D2:115 mm; |
RB1250110 Crossed Roller Bearing | Da max.:460 mm; Axial load factor Y:0.4; Fatigue load limit Pu:265 kN; r1,2 min.:5 mm; da min.:280 mm; da max.:309 mm; D:480 mm; Limiting speed:2000 r/min; D1 ≈:397 mm; Reference speed:1300 r/min; |
120.25.500 Slewing Bearing | Accessories:One Seal; D:57.2000 mm; d:31.800 mm; Sealed Speed Rating n3:7500 rpm; Basic Dynamic Radial Load Rating C:14000 N; Oil Speed Rating Open/Shielded n2:13000 rpm; Fillet Radius ra:0.79 mm; Width Plain B:9.5 mm; Shielded or Sealed B1:12.7 mm; Grease Speed Rating Open/Shielded n1:11000 rpm; |
XSA141094N Crossed Roller Slewing Ring Slewing Bearing | Fillet Radius ra:2.00 mm; Oil Speed Rating n2:3600 rpm; d:110.000 mm; Basic Dynamic Radial Load Rating C:88400 N; D:200.0000 mm; Basic Static Radial Load Rating Co:39000 N; B:38.00 mm; Grease Speed Rating n1:3000 rpm; |
Excavator Slewing Ring For PC240LC-8K, Part Number:206-25-00301 | Grease Speed Rating Open/Shielded n1:2800 rpm; B:49.00 mm; D:225.0000 mm; Basic Static Radial Load Rating Co:153000 N; Sealed Speed Rating n3:2000 rpm; Accessories:Two Seals & Snap-Rin; d:105.000 mm; Basic Dynamic Radial Load Rating C:182000 N; Oil Speed Rating n2:3400 rpm; Oil Speed Rating Open/Shielded n2:3400 rpm; |
Slewing Ring For Excavator HITACHI ZX450-3, Part Number:9247287 | J min.:244.475 mm; Housing:FSAF 516; Ca:42.799 mm; P180°:23.1 kN; P90°:36 kN; P120°:21.8 kN; Da:140 mm; Cap bolt:2 x 5/8-11 UNC; End plug (suffix Y):EPR 8; RG:3/8 NPT; |
NRXT11020 Crossed Roller Bearing 110x160x20mm | Cap bolt:4 x 3/4-10 UNC; H2:76.2 mm; da:165.1 mm; Initial grease fill:1304.1 g; J1:117.475 mm; Adapter sleeve assembly:SNW 136x6.1/2; ba:88.106 mm; A1:180.975 mm; PG:1/4 NPT; Cap bolt, SAE grade:5; |
CRBC 08013 Crossed Roller Bearings 80x110x13mm CNC Machine Tool Use | d4 max.:26.5 mm; l4 max.:81 mm; d:20 mm; α:9 °; l7 min.:24 mm; Material constant KM:330; dk:29 mm; r1 min.:0.3 mm; d2 max.:58 mm; Basic dynamic load rating C:30 kN; |
VSU 201094 Four Point Contact Slewing Ring Video