| No. | Brand | C | K | A | T | a | G | h | b |
| x360 | - | - | - | - | - | - | - | - | - |
| H06CT | Hitachi | - | - | - | - | - | - | - | - |
| 2 | FAFNIR | - | - | - | - | - | - | 52.388 mm | - |
| (2 | - | - | - | - | - | - | - | - | - |
| 4436536 | - | - | - | - | - | - | - | - | - |
| 20FT | - | - | - | - | - | - | - | - | - |
| 02.50CH2AUS13AC4.750 | Parker | - | - | - | - | - | - | - | - |
| (XQD-19) | - | - | - | - | - | - | - | - | - |
| 10-50pcs | - | - | - | - | - | - | - | - | - |
| 2289 | - | - | - | - | 46.4 mm | - | - | - | - |
| D53 | - | - | 9 mm | - | - | - | - | - | - |
| 4X4 | - | - | - | - | - | - | - | - | - |
| 12pk | - | - | - | - | - | - | - | - | - |
| 7-Ton | - | - | - | - | 37.3 mm | - | - | - | - |
| 25mm | - | - | - | - | - | - | - | - | - |
| 15X30X5 | - | - | - | - | - | - | - | - | - |
| 501 | - | - | - | - | - | - | - | - | mm |
| 21317EXW33 | Nachi | - | - | - | - | - | Tr 600x6 | - | - |
| 99.5% | INA | - | - | - | - | - | - | - | - |
| 38X30 | - | - | - | - | - | - | - | 79.375 mm | - |
| 1.3mm | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | 79.375 mm | - |
| 2 | - | - | - | 114.3 mm | - | - | - | - | - |
| 7783-20-2 | - | - | - | - | - | - | - | - | - |
| A10VD43 | Rexroth | - | - | - | - | - | - | - | - |
| 2203 | SKF | - | - | - | - | - | - | - | - |
| 12mm | INA | - | - | - | - | - | - | - | - |
| NRXT50040E/ Crossed Roller Bearings (500x600x40mm) | D1 ≈:537 mm; Da max.:566 mm; B:118 mm; F:497 mm; Mass bearing:75 kg; ra max.:2.5 mm; da min.:474 mm; D:580 mm; da max.:489 mm; Basic dynamic load rating C:1190 kN; |
| 1.181 Inch | 30 Millimeter x 1.457 Inch | 37 Millimeter x 1.496 Inch | 38 Millimeter 1797/3230G Bearing 3230x4100x240mm | l1 min.:86 mm; Material constant KM:330; Basic dynamic load rating C:100 kN; Specific dynamic load factor K:100 N/mm²; l2 max.:199 mm; B:28 mm; C1 max.:24 mm; d2 max.:94 mm; l7 min.:46 mm; r1 min.:0.6 mm; Size (mm):1.181 Inch | 30 Millimeter x 1.457 Inch | 37 Millimeter x 1.496 Inch | 38 Millimeter ; |
| 170 mm x 260 mm x 28 mm Slewing Bearing JCB220 For Excavator | P90°:4200 kN; Q180°:2100 kN; Locating ring:2 x FRB 10/650; L:1120 mm; J:950 mm; Labyrinth seal:2 x TS 92; P55°:8700 kN; P0°:7000 kN; Pa:2200 kN; db:430 mm; Size (mm):170 mm x 260 mm x 28 mm ; |
| RU228X Cross Roller Bearing 160x295x35mm | Oil Speed Rating Open/Shielded n2:4500 rpm; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:102000 N; B:35.00 mm; D:150.0000 mm; Basic Dynamic Radial Load Rating C:114000 N; Grease Speed Rating Open/Shielded n1:3700 rpm; d:70.000 mm; Accessories:One Shield & Snap-Ri; |
| NRXT8013 Crossed Roller Bearing 80x110x13mm | Dimension J:1.6250 in; Insert Bearing IB:Stainless Steel; Weight W:1.70 lb; Pin Dia A1:0.5313 in; Basic Static Radial Load Rating Co:3440 lbf; Dimension C:3.5000 in; Dimension L:4.8125 in; Dimension B:4.1250 in; Dimension G:0.3750 in; Basic Dynamic Radial Load Rating:4560 lbf; |
| 7787/2728K Bearing 2127x3100x210mm | Calculation factor f2D:1.14; Basic dynamic load rating C:18.2 kN; a:22.4 mm; Basic static load rating C0:13.7 kN; Da max.:75.4 mm; r1,2 min.:1 mm; Calculation factor e:0.68; rb max.:0.3 mm; Calculation factor (single, tandem) Y2:0.87; D1:72.3 mm; |
| VLI200844-N Slewing Bearing S-upplier Made In China 736x948x56mm | Ca:130 mm; A1:230 mm; J1:130 mm; Cap bolt, rec. tightening torque:350 N·m; H1:210 mm; Q150°:1040 kN; N:42 mm; Oil seal:TSD 3044 U; Da:340 mm; J6:560 mm; |
| Komatsu PC400HD-5K Excavator Part Number 208-25-52100 Swing Bearing | F:460 mm; s max.:4.4 mm; rb max.:3 mm; D1 ≈:531 mm; da min.:436 mm; D:580 mm; Mass bearing:110 kg; Basic dynamic load rating C:2380 kN; Limiting speed:1100 r/min; da max.:453 mm; |
| VSA 250755-N Four Point Contact Slewing Ring | Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:2600 rpm; Basic Static Radial Load Rating Co:176000 N; D:150.0000 mm; Accessories:Two Seals; Basic Dynamic Radial Load Rating C:142000 N; d:85.000 mm; B:49.20 mm; Grease Speed Rating n1:2600 rpm; Oil Speed Rating n2:3600 rpm; |
| A12-48E12 Four Point Contact Ball Slewing Bearing With External Gear | r1 min.:1 mm; Design (sliding contact surface combination):Steel/steel; b1:5 mm; Specific static load factor K0:300 N/mm²; α:8 °; Material constant KM:330; C:28.575 mm; ra max.:1 mm; D:61.913 mm; b:4.8 mm; |
KLK 750N Four Point Contact Ball Slewing Turntable Bearing Video