No. | Brand | C | K | A | T | a | G | h | b |
vg35-Good | Parker | - | - | - | - | - | - | - | - |
PS4134P | Parker | - | - | - | - | - | - | - | - |
4JG1 | - | - | - | - | - | - | - | - | - |
22311CCK | SKF | - | - | - | - | - | - | - | - |
RW102R | Timken | - | - | - | - | - | - | - | - |
61808 | - | - | - | - | - | - | - | - | - |
FM6FD-20FA | Parker | - | - | - | - | - | - | - | - |
Brp30 | - | - | - | - | - | - | - | - | - |
sk200-8 | - | 13.495 mm | - | - | 17.462 mm | 16.111 mm | - | - | - |
41.250515 | Nachi | 17.5 mm | - | - | - | - | - | - | - |
+020 | - | - | - | - | - | - | - | - | - |
GRA014RRB | FAFNIR | - | - | - | - | - | - | - | mm |
2220104 | - | - | 4.5 mm | - | 65 mm | - | - | - | - |
33410-77E2 | - | - | - | - | - | - | - | - | 13.9 mm |
146 | - | - | - | - | - | - | - | - | - |
60 | - | - | - | - | - | - | - | - | - |
4 | - | - | - | - | - | - | - | - | - |
XT600 | - | - | - | - | - | - | Tr 320x5 | - | - |
10pcs | - | 20 mm | - | - | - | - | - | - | - |
SK60-5 | - | - | - | - | - | - | - | - | - |
1967-1968 | Timken | - | - | - | - | - | - | - | - |
9-21mm | - | - | - | - | - | - | - | - | - |
5-200rpm | Danfoss | - | - | - | - | - | - | - | - |
013.60.2000 Slewing Bearing | Locating ring:2 x FRB 22/440; J6:650 mm; Oil level, max.:74 mm; J:600 mm; Q150°:1650 kN; s:12 mm; Da:400 mm; N:42 mm; P120°:1500 kN; Eye bolt, size:2 x M 24; |
014.40.900 Slewing Bearing | Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:6800 N; D:37.0000 mm; B:19.1 mm; d:12.000 mm; Basic Dynamic Radial Load Rating C:11700 N; Oil Speed Rating n2:18000 rpm; Accessories:One Shield & Snap-Ri; Sealed Speed Rating n3:14000 rpm; Grease Speed Rating n1:14000 rpm; |
MTE-324X Heavy Duty Slewing Ring Bearing | RG:1/2 NPT; Stabilizing ring:2 x 36053-50; Max. speed for Taconite seal:625 r/min; Mass pillow block:61.2 kg; Cap bolt, SAE grade:8; End plug (suffix Y):EPR 27; Bearing:23028 CCK/W33; H:257.175 mm; A2:250.825 mm; Da:210 mm; |
014.30.630 Slewing Bearing | d1:114.3 mm; G:M 130x2; d:130 mm; B4:23 mm; Mass adapter sleeve assembly:4.25 kg; Lock nut:KML 26; B1:121 mm; d3:155 mm; Hydraulic nut:HMV 26 E; Locking device:MBL 26; |
NRXT4010DD Crossed Roller Bearing 40x65x10mm | d:30 mm; r, r1,2 min.:0.3 mm; Mass inner ring:0.04 kg; F:35 mm; B:20.5 mm; |
020.50.2240 Slewing Bearing | h:232.5 mm; Specific static load factor K0:45 N/mm²; Tolerance housing:H7; d:230 mm; Specific dynamic load factor K:25 N/mm²; D:250 mm; Tolerance shaft:e7; Coefficient of friction µ min.:0.08; B:140 mm; Permissible sliding velocity v max.:0.5 m/s; |
1797/3230G2Y Slewing Beairng | Basic Dynamic Radial Load Rating:5730 lbf; Basic Static Radial Load Rating Co:3440 lbf; Pin Dia BS:1/2; Dimension S1:1.0000 in; Diameter G:0.5313 in; Dimension B:6.1875 in; Dimension N:0.4063 in; Shaft Diameter D:1 1/4 in; Dimension F:0.5625 in; Distance H:1.250 in; |
1787/1075G2K Slewing Beairng | Basic static load rating C0:112 kN; Fatigue load limit Pu:13.7 kN; Ew:66 mm; Limiting speed:8000 r/min; U:33 mm; Basic dynamic load rating C:44 kN; Mass needle roller and cage assembly:0.1 kg; Reference speed:7000 r/min; Fw:60 mm; |
KLK 950ND Four Point Contact Ball Slewing Turntable Bearing | Accessories:One Shield; Oil Speed Rating Open/Shielded n2:6800 rpm; B:25.00 mm; d:35.000 mm; Basic Static Radial Load Rating Co:39000 N; Fillet Radius ra:1.50 mm; D:100.0000 mm; Grease Speed Rating Open/Shielded n1:5600 rpm; Basic Dynamic Radial Load Rating C:53900 N; |
Slewing Bearing HL85 For Excavator | B:43.00 mm; Fillet Radius ra:2.50 mm; Grease Speed Rating n1:3400 rpm; D:190.0000 mm; Oil Speed Rating n2:4000 rpm; Basic Static Radial Load Rating Co:108000 N; Oil Speed Rating Open/Shielded n2:4000 rpm; Basic Dynamic Radial Load Rating C:143000 N; Sealed Speed Rating n3:2400 rpm; d:90.000 mm; |
CRBA12016 Crossed Roller Bearing (120x150x16mm) Industrial Robots Use Video