| No. | Brand | C | K | A | T | a | G | h | b |
| 26mm | INA | - | - | - | 276.225 mm | - | - | - | - |
| 3mm | - | - | - | - | - | - | - | - | - |
| 20x27x4 | - | - | - | - | - | - | - | - | - |
| 99.5% | - | - | - | - | - | - | - | - | - |
| [25 | - | - | - | - | - | - | - | - | - |
| 29985-80050-000 | - | 13 mm | - | - | 16.25 mm | 12 mm | - | - | - |
| SY416 | - | - | - | - | - | - | - | - | - |
| 6201-2RSH/C3 | SKF | - | - | - | - | - | Tr 340x5 | - | - |
| 15mm | - | - | - | - | - | - | - | - | mm |
| 692XM | NSK | - | - | - | - | - | - | - | - |
| 51205 | - | - | - | - | - | - | - | - | - |
| U15-3S | INA | - | - | - | - | - | - | - | - |
| 1045 | - | - | - | - | - | - | - | - | - |
| 155 | NTN | - | - | - | - | - | - | - | - |
| 13 | - | - | - | - | - | - | - | - | - |
| 15X10 | Dodge | - | - | - | - | - | - | - | - |
| 8Pcs | - | - | - | - | - | - | - | - | - |
| AT21_/CT21_ | INA | - | - | - | - | - | - | - | - |
| 61801-2Z-HLU | INA | - | - | - | - | - | - | - | - |
| 6204 | NSK | - | - | - | - | - | M 80x2 | - | - |
| 4-28x50 | - | - | - | - | - | - | - | - | - |
| 61814-2RZ-Y | fag | - | - | - | - | - | - | - | - |
| 131.45.2000 Slewing Bearing | Basic Static Radial Load Rating Co:26500 N; d:23.838 mm; B:63.50 mm; Basic Dynamic Radial Load Rating C:22500 N; Fillet Radius ra:0.80 mm; Set:Quadruplex Set DFDT; Lateral Eccentricity Max LE:0.003 mm; D:62.0000 mm; |
| RA18013UUCC0 High Precision Cross Roller Ring Bearing | A2:295.275 mm; H:419.1 mm; End plug (suffix Y):EPR 21; A1:203.2 mm; Pa:58.7 kN; Labyrinth ring:2 x LOR 160; R1:122.237 mm; Housing:SAFS 540; h:62.706 mm; P150°:185 kN; |
| 788/800G Slewing Bearing 800x1012x90mm | Basic static load rating C0:23.5 kN; α:10 °; B:16 mm; G:M 12x1.25; Tightening torque bolt with internal hexagon:10 N·m; l7 min.:20 mm; r1 min.:0.3 mm; Basic dynamic load rating C:21.2 kN; N1 max.:13 mm; Material constant KM:330; |
| CSG(CSF)-14 Cross Roller Bearing, Harmonic Drive Bearing, Harmonic Reducer Bearing, Robot Bearing | Static (Cor):108.000 kN; Dynamic (Cr):110.379 kN; ra:2 max; da:65 min; Pu:4.909 kN; Da:110 max; Bearing designation:3311 ; D:120 mm; B:49.2 mm; d:55 mm; |
| RB60040 Cross Roller Bearings 600*700*40mm | H2:85.725 mm; J1:127 mm; H1:209.55 mm; RG:1 NPT; Ca:129.794 mm; End plug (suffix Y):EPR 19; dc:163.512 mm; PG:1/4 NPT; Pa:93.9 kN; P180°:145 kN; |
| Produce CRB13025 Crossed Roller Bearing，CRB13025 Bearing Size130X190x25mm | s1:15.9 mm; GN:1/4-28 SAE-LT; N:11.5 mm; Thread grub screw G2:#10-32 UNF; RG:1/4-28 UNF; H:98.5 mm; Recommended tightening torque for grub screw:4 N·m; Rα:45 °; J7:11 mm; Bearing:YAT 203-010; |
| SOR10/180 Four Point Contact Slewing Bearing | Oil Speed Rating n2:13000 rpm; D:62.0000 mm; Fillet Radius ra:1.00 mm; Grease Speed Rating Open/Shielded n1:10000 rpm; Grease Speed Rating n1:10000 rpm; Basic Static Radial Load Rating Co:11200 N; Oil Speed Rating Open/Shielded n2:13000 rpm; B:16.00 mm; d:30.000 mm; Sealed Speed Rating n3:7500 rpm; |
| VSA251055-N Slewing Bearing Manufacturer 955x1198x80mm | Grease Speed Rating n1:7000 rpm; Fillet Radius ra:1.00 mm; D:90.0000 mm; Oil Speed Rating Open/Shielded n2:8500 rpm; Sealed Speed Rating n3:4800 rpm; Basic Dynamic Radial Load Rating C:35100 N; B:20.00 mm; Basic Static Radial Load Rating Co:23200 N; Grease Speed Rating Open/Shielded n1:7000 rpm; Accessories:Shield & Seal; |
| XSI140744N Crossed Roller Slewing Ring Slewing Bearing | Ca:82.804 mm; Da:215.001 mm; Cap bolt, SAE grade:8; Mass pillow block:45.9 kg; da:84.138 mm; H2:53.975 mm; P180°:81.4 kN; R1:79.375 mm; J1:69.85 mm; P120°:72.5 kN; |
| 91-20 0841/1-07153 Four-point Contact Ball Slewing Bearing With External Gear | Hydraulic nut:HMVC 44E; B:32.004 mm; B1:149.631 mm; d1:203.2 mm; Lock nut:N 044; d3 max.:260.477 mm; d:220 mm; G:219.151 mm; Sleeve:S 44x8; B4:34.925 mm; |
CRBE 16035 B Cross Roller Ring 160x295x35mm Video