| No. | Brand | C | K | A | T | a | G | h | b |
| Bearing,2-Bolt,Ball,25mm | NTN | - | - | - | - | - | - | - | - |
| A6VE28 | Rexroth | - | - | - | 84 mm | - | - | - | 4.5 mm |
| 3-5 | - | - | - | - | - | - | - | - | - |
| 938 | - | - | - | - | - | - | - | - | - |
| 6014 | NSK | - | - | - | - | - | - | - | - |
| 3/4 | - | - | - | - | - | - | - | - | - |
| 4*8 | - | - | - | - | - | - | - | - | - |
| A11vlo260 | - | - | - | - | - | - | - | - | - |
| SH300-2 | INA | - | - | - | - | - | - | - | - |
| 800 | NTN | - | - | - | - | - | - | - | - |
| 21% | - | - | - | - | - | - | - | - | - |
| 40% | - | - | - | - | - | - | - | - | - |
| 6815 | Nachi | - | - | - | - | - | - | - | - |
| 1 | Parker | - | - | - | - | - | - | - | - |
| 2K | - | - | - | - | - | - | - | - | - |
| ZX55 | Hitachi | - | - | - | - | - | - | - | - |
| 6061-T6 | - | 28 mm | - | - | - | 32 mm | - | - | - |
| 10] | - | - | - | - | - | - | - | - | - |
| 10PC | - | - | - | - | - | - | - | 61.913 mm | - |
| 76.90 | - | - | - | - | - | - | - | - | - |
| 7782-63-0 | - | - | - | - | - | - | - | - | - |
| VU300574 Slewing Bearing Manufacturer 522x344x55 Mm | Mass bearing:1200 kg; Basic dynamic load rating C:13522 kN; Calculation factor e:0.37; Calculation factor Y1:1.8; Calculation factor Y0:1.8; Calculation factor Y2:2.7; Reference speed:200 r/min; b:22.3 mm; B:375 mm; Limiting speed:300 r/min; |
| 9E-1B32-1086-0530 Four Point Contact Ball Slewing Ring | r3,4 min.:2.5 mm; D:110 mm; db min.:77.5 mm; Ca min.:5 mm; d:65 mm; C:22.5 mm; rb max.:2.5 mm; Fatigue load limit Pu:21.2 kN; Cb min.:5.5 mm; Calculation factor Y0:0.8; |
| 024.25.710 Slewing Bearing | r1,2 min.:1.1 mm; d:50 mm; Mass shaft washer:0.37 kg; B:9.5 mm; d1:95 mm; |
| XV70 Table/slewing Bearing 70x120x16mm | rs (min):1 mm; Pu:7.270 kN; a:15 mm; d2:30 mm; Dynamic (Ca):50.1 kN; Static (Coa):59.6 kN; r2s (min):0.3 mm; T:21.25 mm; r1s (min):1 mm; B:20 mm; |
| VSU200644 Slewing Bearing / Four Point Contact Bearing 572x716x56mm | Basic Static Radial Load Rating Co:260000 N; D:320.0000 mm; Sealed Speed Rating n3:1500 rpm; B:70.00 mm; d:110.000 mm; Grease Speed Rating Open/Shielded n1:2100 rpm; Oil Speed Rating Open/Shielded n2:2600 rpm; Accessories:Without Accessories; Basic Dynamic Radial Load Rating C:270000 N; Fillet Radius ra:3.00 mm; |
| RE50040 Cross Roller Bearings,RE50040 Bearings SIZE 500x600x40mm | s:31.75 mm; H:160.338 mm; A1:99.219 mm; H1:79.375 mm; J max.:247.65 mm; Mass bearing unit:10.9 kg; B:92.075 mm; da:74.612 mm; Basic dynamic load rating C:158 kN; H2:47.625 mm; |
| 231.21.0575.013 Four Contact Ball Slewing Ring 435x640.8x56mm | RG:1/2 NPT; Adapter sleeve assembly:SNW 120x3.7/16; H:258.762 mm; J max.:368.3 mm; P60°:185 kN; End plug (suffix Y):EPR 12; h:51.594 mm; H1:133.35 mm; ba:57.944 mm; P180°:81.4 kN; |
| RB8016UU High Precision Cross Roller Ring Bearing | R1:104.775 mm; PG:1/4 NPT; Initial grease fill:793.8 g; L:558.8 mm; Bearing:23036 CCK/W33; Housing:SAF 036 KA; P180°:94.3 kN; P60°:226 kN; A2:222.25 mm; Eye bolt:2 x 3/8-16 UNC; |
| XU080149 Cross Roller Bearing Manufacturer 101.6x196.85x22.22mm | H2:41.275 mm; R2:27.94 mm; A2:223.838 mm; S:4.763 mm; Cap bolt recommended tightening torque:298.3 N·m; Taconite seal:TER 36; Mass pillow block:23.6 kg; P180°:42.3 kN; Bearing:22315 EK; PG:1/8 NPT; |
| NRXT5013 High Precision Cross Roller Ring Bearing | Mass inner ring:0.14 kg; d:55 mm; r, r1,2 min.:1 mm; B:25 mm; F:63 mm; |
CRBC 04510 Crossed Roller Bearings 45x70x10mm CNC Machine Tool Use Video