No. | Brand | C | K | A | T | a | G | h | b |
17580 | Timken | - | - | - | - | - | - | - | - |
13Pc | - | - | - | - | - | - | - | - | - |
LML8301 | - | - | - | - | - | - | - | - | - |
3mm | - | - | - | - | - | - | - | - | - |
SK60-5 | - | - | - | - | - | - | - | - | - |
P11 | - | - | - | - | - | - | - | - | - |
MPV046 | - | - | - | - | - | - | - | 265 mm | - |
2mm-30mm | - | - | - | - | - | - | - | - | - |
RD400E/F | NTN | - | - | - | - | - | - | - | - |
NJ210E.TVP2.C3 | fag | 54 mm | 4.5 mm | - | - | - | - | - | - |
19.0 | - | - | - | - | - | - | - | - | - |
(1220*2440) | - | - | - | - | - | - | - | - | - |
4 | - | - | - | - | - | - | - | - | - |
(4 | John Deere | - | - | - | - | - | - | - | - |
PC220-6 | INA | - | - | - | - | - | - | - | - |
13-Ply | - | - | - | - | - | - | - | - | - |
WA16 | - | - | - | - | - | - | - | - | - |
(9mm/12mm/15mm/17mm/18mm/21mm) | - | - | - | - | - | - | - | - | - |
983061-U | Danfoss | - | - | - | - | - | - | - | - |
Ex220-5 | - | - | - | - | 360 mm | - | - | - | - |
E0, | - | - | - | - | - | - | - | - | - |
1040 | - | - | - | - | - | - | - | - | - |
21mm | - | - | - | - | - | - | - | - | - |
1982-2004 | koyo | - | - | - | - | - | 529.006 mm | - | - |
RKS.161.14.0944 Cross Roller Slewing Bearing With External Gear | A2:222.25 mm; H:222.25 mm; Stabilizing ring:SR-20-17; P90°:71.2 kN; J max.:333.375 mm; P150°:40 kN; Ca:70.104 mm; da:88.9 mm; Da:180 mm; R2:30.163 mm; |
XSA140414-N XSA140414N XSA14 0414N Cross Roller Slewing Bearing | Calculation factor e:0.3; Mass bearing:345 kg; B:195 mm; d:560 mm; d1 ≈:642 mm; D1 ≈:738 mm; s max.:16 mm; das:626 mm; Fatigue load limit Pu:865 kN; Limiting speed:380 r/min; |
787/1916G2 Slewing Bearing 1916*2320*144mm | RG:1 NPT; L:831.85 mm; J min.:628.65 mm; Da:399.999 mm; da:198.438 mm; J max.:708.025 mm; P180°:285 kN; Max. speed for Taconite seal:385 r/min; Stabilizing ring:SR-44-38; Mass pillow block:356 kg; |
CRBB12025 Cross Roller Bearing (120x180x25mm) Industrial Robotic Arm Bearing | Sealed Speed Rating n3:2800 rpm; Accessories:Synthetic Rubber Sea; d:75.000 mm; Oil Speed Rating Open/Shielded n2:5000 rpm; Grease Speed Rating Open/Shielded n1:4300 rpm; Fillet Radius ra:2.00 mm; B:68.26 mm; Basic Static Radial Load Rating Co:85000 N; Basic Dynamic Radial Load Rating C:124000 N; D:160.0000 mm; |
HS6-25N1Z Heavy Duty Slewing Ring Bearing With Internal Gear | Cb min.:5 mm; Ca min.:5 mm; Calculation factor Y0:0.9; Fatigue load limit Pu:22.8 kN; a:25.026 mm; Basic static load rating C0:212 kN; r3,4 min.:1.5 mm; Da max.:135.5 mm; Basic dynamic load rating C:149 kN; Da min.:135 mm; |
131.40.1600 Slewing Bearing | Grease Speed Rating n1:3800 rpm; B:49.20 mm; Basic Dynamic Radial Load Rating C:119000 N; Accessories:No Shield, no Seal; d:55.000 mm; Basic Static Radial Load Rating Co:122000 N; Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:3800 rpm; D:120.0000 mm; Oil Speed Rating n2:5000 rpm; |
Cross Roller Bearings Harmonic Drive Bearings BCSF-40 (24x126x24)mm | Calculation factor e:0.4; Reference speed:4800 r/min; Limiting speed:6000 r/min; ra max.:3.5 mm; B:21.996 mm; Mass bearing:0.84 kg; da max.:77 mm; rb max.:1.3 mm; Db min.:105 mm; Da max.:102 mm; |
21K-25-41120 Swing Bearing For Komatsu PC160LC-7K Excavator | A2:358.775 mm; Taconite seal:TER 158; P60°:557 kN; J1:127 mm; N1:34.925 mm; Cap bolt:1 1/4-7 UNC; H1:209.55 mm; S:4.763 mm; H2:85.725 mm; Cap bolt, SAE grade:8; |
Komatsu PC130-7 Excavator Slewing Bearing | J:111.125 mm; L:139.7 mm; s:25.4 mm; Basic dynamic load rating C:84.5 kN; d2:73.819 mm; A1:75.406 mm; Attachment bolt diameter G:12.7 mm; B:73.025 mm; A5:27.781 mm; A:57.15 mm; |
YRT80 Rotary Table Bearings (80x146x35mm) Turntable Bearing | dc:174.625 mm; Labyrinth ring (dc shaft position):LOR 154; P60°:234 kN; End plug (suffix Y):EPR 21; N1:28.575 mm; P180°:89 kN; P150°:75.6 kN; Appropriate attachment bolt size G:1 in; R1:114.3 mm; Max. speed for PosiTrac Plus seal:725 r/min; |
CRBC 12020 Crossed Roller Bearings 120x170x20mm Industrial Robots Arm Use Video