| No. | Brand | C | K | A | T | a | G | h | b |
| G10 | - | - | - | - | - | - | - | - | - |
| 33208 | - | - | - | - | - | - | - | - | - |
| +020 | - | - | - | - | - | - | - | - | - |
| D3 | INA | - | - | - | - | - | - | - | - |
| 40Cr | - | - | - | - | - | - | - | - | - |
| 5050 | - | - | - | - | - | - | Tr 630x6 | - | - |
| Z400 | - | - | - | - | - | - | - | - | - |
| 040B0070 | Danfoss | - | - | - | - | - | - | - | - |
| te37 | - | - | - | - | - | - | - | - | - |
| N21% | - | - | - | - | - | - | - | - | - |
| FX3Y216E3 | Link-Belt | - | - | - | - | - | - | - | - |
| 65x85x10 | INA | - | - | - | - | - | - | - | - |
| [10PC] | - | - | - | - | - | - | - | - | - |
| 3/4' | - | - | - | 76.2 mm | - | - | - | - | - |
| 38X73X40 | - | - | - | - | - | - | - | - | - |
| 2x | TRW | - | - | - | - | - | - | - | - |
| A6VE28 | Rexroth | - | - | - | 84 mm | - | - | - | 4.5 mm |
| NUP2210 | - | - | - | - | - | - | - | - | - |
| 1140 | - | - | - | - | - | - | - | - | - |
| 3 | - | - | - | - | - | - | - | 46.038 mm | - |
| (2) | Rexroth | - | 7.5 mm | - | - | - | - | - | - |
| 10x | - | - | - | - | - | - | - | - | - |
| 16-14 | INA | - | - | - | - | - | - | - | - |
| 99% | - | - | - | - | - | - | - | - | - |
| VLA201094-N Rotary Table/slewing Bearing 984x1198.1x56mm | A1:42.875 mm; A3:42.875 mm; A2:28.575 mm; Hexagonal head bolts:2 x 5/8-11x1-1/4; Mass locking plate:0.33 kg; L:173.838 mm; B:3.969 mm; |
| RB8016 Crossed Roller Bearings | L:419.1 mm; Initial grease fill:481.95 g; H:239.316 mm; Appropriate attachment bolt size G:0.75 in; P150°:50.7 kN; Stabilizing ring:2 x SR-1522; Ca:62.789 mm; J1:69.85 mm; ba:42.069 mm; P180°:60.9 kN; |
| A10-22E5A Four Point Contact Ball Slewing Bearing With External Gear | Da max.:632 mm; d1:450 mm; B1:200 mm; K:9 mm; B2:60 mm; Calculation factor e:0.18; B5:77 mm; da max.:537 mm; D1 ≈:602 mm; Limiting speed:1000 r/min; |
| Slewing Ring For Excavator KOBELCO SK100 III, Part Number:24100N7529F1 | Grease Speed Rating n1:4900 rpm; Oil Speed Rating n2:6400 rpm; d:65.000 mm; Basic Dynamic Radial Load Rating C:63700 N; B:23.00 mm; Fillet Radius ra:1.50 mm; Basic Static Radial Load Rating Co:54000 N; D:120.0000 mm; |
| RA7008UUCC0 High Precision Cross Roller Ring Bearing | d:90.000 mm; Fillet Radius ra:3.00 mm; Basic Static Radial Load Rating Co:150000 N; Basic Dynamic Radial Load Rating C:186000 N; Oil Speed Rating Open/Shielded n2:3600 rpm; B:54.00 mm; D:225.0000 mm; Accessories:Snap-Ring; Grease Speed Rating Open/Shielded n1:3000 rpm; Sealed Speed Rating n3:2100 rpm; |
| Produce CRB10020 Crossed Roller Bearing，CRB10020 Bearing Size100X150x20mm | l7 min.:46 mm; r1 min.:0.6 mm; l2 max.:194 mm; Specific dynamic load factor K:100 N/mm²; α:6 °; G:M 42x3; Basic dynamic load rating C:100 kN; Mass rod end:1.9 kg; dk:53 mm; l1 min.:76 mm; |
| NRXT40035 High Precision Cross Roller Ring Bearing | B:20 mm; r1,2 min.:2.1 mm; Mass housing washer:4.16 kg; D:225 mm; D1:134 mm; |
| Cross Roller Bearing XR882055 Thrust Tapered Roller Bearing 901.7x1117.6x82.555mm | B:34 mm; Locking device:MS 3052-48; d1:220 mm; G2:M 6; d:240 mm; B5:46 mm; Mass adapter sleeve assembly:11.4 kg; Hydraulic nut:HMV 48E; A:4.2 mm; d3:290 mm; |
| VSU200844-N Slewing Bearing / Four Point Contact Bearing 772x916x56mm | Height T:42.2 mm; Diameter N:11.5 mm; Basic Dynamic Radial Load Rating C:19500 N; Dimension L:83.0 mm; Height H:142.5 mm; Weight W:0.44 kg; Distance J:116.5 mm; Dimension DA:76.2 mm; Basic Static Radial Load Rating Co:11200 N; Dimension A2:15.0 mm; |
| 120.32.1400 Slewing Bearing | Coefficient of friction µ max.:0.15; Specific dynamic load factor K:25 N/mm²; Coefficient of friction µ min.:0.08; d:7 mm; Mass bushing:0.008 kg; Specific static load factor K0:45 N/mm²; Permissible sliding velocity v min.:0 m/s; Permissible sliding velocity v max.:0.5 m/s; B:12 mm; Tolerance shaft:e7; |
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
China Wind Power Slewing Bearing 111.40.1780.03 Wind Turbine Crossed Roller Slewing Bearing Video