No. | Brand | C | K | A | T | a | G | h | b |
G73917 | - | - | - | - | - | - | - | - | - |
5/10/20 | - | - | - | - | - | - | - | 52.388 mm | - |
4WE6 | Rexroth | - | - | - | - | - | - | - | - |
90 | Danfoss | - | - | - | - | - | - | - | - |
Sb-Pts07 | - | - | - | - | - | - | - | - | - |
GE35TE-2RS | SKF | - | - | 32.5 mm | - | - | - | - | - |
30X42X7 | - | - | - | - | - | - | - | - | - |
(ST0054) | - | - | - | - | - | - | - | - | - |
Mmfo25c | - | - | - | - | - | - | - | - | - |
6208 | NSK | - | - | - | - | - | - | - | - |
YZ80F | NTN | - | - | - | - | - | - | - | - |
PC130-6 | - | - | - | - | - | - | - | - | - |
4x | - | - | - | - | - | - | - | - | - |
5X | - | - | - | - | - | - | - | - | - |
220g | INA | - | - | - | - | - | - | - | - |
0078584 | NTN | - | - | - | - | - | - | - | - |
38134 | INA | 34 mm | - | - | 44.5 mm | - | - | - | - |
99.5%Min | - | - | - | - | - | - | - | - | mm |
6702ZZ | - | - | - | - | - | - | - | - | - |
6702ZZ | - | - | - | - | - | - | 84.836 mm | - | - |
18mm | - | - | - | - | - | - | - | - | - |
14180 | - | 53 mm | - | - | - | - | - | - | - |
CR250RA | NTN | - | - | - | - | - | - | - | 22.3 mm |
FBK996 | - | - | - | - | - | - | - | - | - |
282.30.1075.013 Four Contact Ball Slewing Ring 912x1198x90mm | Ba min.:9 mm; d1:45 mm; d2 ≈:60 mm; Da max.:83 mm; D1 ≈:79 mm; db min.:55 mm; b:5.5 mm; B4:12 mm; Calculation factor Y0:2.8; Calculation factor Y2:4.2; |
014.30.560 Slewing Bearing | Fillet Radius ra:2.00 mm; D:260.0000 mm; d:170.000 mm; Fillet Radius rb:1.00 mm; Grease Speed Rating n1:4100 rpm; Basic Dynamic Radial Load Rating C:345000 N; Oil Speed Rating n2:6200 rpm; Basic Static Radial Load Rating Co:490000 N; B:84.00 mm; |
NRXT9020E/ Crossed Roller Bearings (90x140x20mm) Industrial Robots Bearing | Pu:276.450 kN; d2:280 mm; B:130 mm; F:330 mm; E:0 mm; s:10 mm; d2 (max):0 mm; b1:0 mm; r1s (min):5 mm; Static (Coa):3410 kN; |
Produce CRB14025 Crossed Roller Bearing,CRB14025 Bearing Size140X200x25mm | L:349.25 mm; R1:60.325 mm; R2:27.781 mm; P90°:84.5 kN; Stabilizing ring:SR-18-15; RG:3/8 NPT; P120°:53.4 kN; dc:85.725 mm; h:38.1 mm; Housing:SAFS 218; |
China Wind Power Slewing Bearing 013.35.2000.03 Wind Turbine Slewing Bearing | ba:25.4 mm; Bearing:1309 EKTN9; Contact seal:2 x B9784-12; P150°:12 kN; P180°:14.7 kN; N1:19.05 mm; Cap bolt recommended tightening torque:149.1 N·m; Ventilation fitting:38174-12; Ca:45.796 mm; RG:1/8 NPT; |
9E-1B60-3585-1387 Four Point Contact Ball Slewing Ring | Accessories:Snap-Ring; Basic Dynamic Radial Load Rating C:24700 N; d:50.000 mm; Fillet Radius ra:1.00 mm; D:80.0000 mm; B:16.00 mm; Grease Speed Rating Open/Shielded n1:8500 rpm; Oil Speed Rating Open/Shielded n2:10000 rpm; Basic Static Radial Load Rating Co:18000 N; Sealed Speed Rating n3:5000 rpm; |
013.30.500 Slewing Bearing | A2:171.45 mm; Da:180 mm; da:76.2 mm; P60°:104 kN; L:387.35 mm; Appropriate attachment bolt size G:0.75 in; Stabilizing ring:2 x SR-1617; Pa:10.5 kN; P90°:62.3 kN; Bearing:1317 K; |
10 mm x 22 mm x 6 mm Cross Roller Bearings RE13015 Bearings SIZE 120x180x25mm | K:7.5 mm; 2B:58 mm; r3,4 min.:2 mm; Da max.:111 mm; r5 min.:0.6 mm; D:120 mm; Da min.:94 mm; T:63 mm; d:55 mm; Basic static load rating C0:275 kN; Size (mm):10 mm x 22 mm x 6 mm ; |
CRB30040UUT1 High Precision Cross Roller Ring Bearing | ra max.:1 mm; B:100 mm; Basic static load rating C0:4500 kN; α:12 °; Design (sliding contact surface combination):Steel/PTFE fabric; da min.:120 mm; Specific dynamic load factor K:300 N/mm²; Specific static load factor K0:500 N/mm²; da max.:124.5 mm; r2 min.:1 mm; |
VSU200844 Slewing Bearings M-anufacturer 772x916x56mm | Da:259.999 mm; Cap bolt, SAE grade:5; P60°:249 kN; Housing:SAF 034 KA; R2:38.1 mm; P150°:85.9 kN; H2:60.325 mm; Eye bolt:3/8-16 UNC; Pa:34 kN; J max.:441.325 mm; |
China Wind Power Slewing Bearing 013.40.2720.03 Wind Turbine Slewing Bearing Video