| No. | Brand | C | K | A | T | a | G | h | b |
| DHF08-221H | - | - | - | - | - | - | - | - | - |
| 8x14x4mm | - | - | - | - | - | - | M 56x4 | - | - |
| 15X30X5 | - | - | - | - | - | - | - | - | - |
| 1312-TVH | fag | - | - | - | - | - | - | - | 2.6 mm |
| 1999-2004 | Timken | - | - | - | - | - | - | - | - |
| SK200-6 | INA | - | - | - | - | - | - | - | - |
| 6302 | fag | - | - | 73.025 mm | - | - | - | - | - |
| F12-060 | Parker | - | - | - | - | - | - | - | - |
| 10,000 | - | - | - | - | - | - | - | - | - |
| S6205-2RS | - | - | - | - | - | - | - | - | - |
| 2018 | - | - | - | - | - | 359 mm | - | - | - |
| [4pcs] | - | - | - | - | - | - | - | - | - |
| R6ZZST | - | - | - | - | - | - | - | - | - |
| 4132-2CS5V | SKF | - | - | - | - | - | - | - | - |
| 607Z | - | - | - | - | - | - | - | - | - |
| 3 | - | - | - | - | - | - | - | - | - |
| 2W-160-15B | - | - | - | - | - | - | - | - | - |
| PC300-7 | - | - | - | - | - | - | - | - | - |
| 6305 | NSK | - | - | - | - | - | - | - | - |
| 99.5% | - | - | - | - | - | - | - | - | - |
| 7217CD/P4ADT | - | - | - | - | - | - | - | - | - |
| CL2B-DA08 | - | - | - | - | - | - | - | - | - |
| 3076 | INA | - | - | - | - | - | - | - | - |
| 722 | INA | - | - | - | - | - | - | - | - |
| 3mm | - | - | - | - | - | - | - | - | - |
| RU148X Cross Roller Bearing 90x210x25mm | H1:241.3 mm; ba:90.487 mm; Pa:71.2 kN; H2:95.25 mm; P150°:236 kN; Ca:117.805 mm; R2:46.831 mm; PG:1/4 NPT; Cap bolt:1 1/2-6 UNC; h:79.375 mm; |
| SH220 Slewing Bearing | A:58.737 mm; Limiting speed:4500 r/min; H2:33.337 mm; da:42.862 mm; Basic dynamic load rating C:102 kN; H1:53.975 mm; J max.:152.4 mm; H:109.537 mm; J min.:131.762 mm; B:59.531 mm; |
| 787/1700KM Slewing Bearing | B:31.00 mm; d:65.000 mm; Fillet Radius ra:1.50 mm; Oil Speed Rating n2:6000 rpm; Basic Dynamic Radial Load Rating C:57200 N; D:120.0000 mm; Grease Speed Rating n1:5000 rpm; Basic Static Radial Load Rating Co:20000 N; |
| Slewing Bearing SH210-5 For Excavator | Width G:7/16; Diameter E:1.469 in; Basic Radial Load Rating-Static SCO:899 lbf; Depth L:9/16 in; Variant:CONV-3-Y-2; Basic Radial Load Rating-Dynamic DC:1330 lbf; D:1.6540 in; Approx. Weight:0.27 lb; Shaft Diameter D:5/8 in; B:0.7500 in; |
| SX011860 Cross Roller Bearing 300x380x38mm | Recommended diameter for attachment bolts, inch G:0.5 in; A1:14.3 mm; A:35.7 mm; B4:6 mm; Basic static load rating C0:15.3 kN; End cover:ECW 207; Mass bearing unit:1.35 kg; L:92.1 mm; Recommended diameter for attachment bolts, mm G:12 mm; Db2:92.1 mm; |
| 4789/930 Slewing Bearing | da max.:119 mm; Da min.:145 mm; Db min.:158 mm; db min.:123.5 mm; d:110 mm; Fatigue load limit Pu:37.5 kN; a:37.513 mm; Basic static load rating C0:355 kN; Basic dynamic load rating C:256 kN; r1,2 min.:3 mm; |
| RB60040 Cross Roller Bearing 600x700x40mm | D:135.755 mm; Basic dynamic load rating C:353 kN; Cb min.:9.5 mm; Db min.:125 mm; Basic static load rating C0:400 kN; r1,2 min.:3.5 mm; Da max.:123.5 mm; T:53.975 mm; d1 ≈:97.5 mm; B:56.007 mm; |
| RE 14016 Crossed Roller Bearing 140x175x16mm | Angle between holes in outer ring (Pitch) α:30 °; r1,2 min.:0.3 mm; Static axial stiffnes:900 N/µm; Static moment stiffness:290 N·m/mrad; Mass bearing:0.75 kg; Attainable speed:4900 r/min; Required attachment bolt size (DIN 912):M6; Frictional moment:0.25 N·m; J:63 mm; d:30 mm; |
| Case Cx130 Excavator Slewing Bearing | B2 ≈:56 mm; Da max.:139 mm; r1,2 min.:2 mm; da min.:92.2 mm; Basic dynamic load rating C:291 kN; d2 ≈:101 mm; B1:52 mm; D1 ≈:133 mm; d1:80 mm; ra max.:2 mm; |
| 1797/3230G2Y3 Slewing Beairng | A2:273.05 mm; H1:200.025 mm; Ca:101.803 mm; h:57.15 mm; P180°:113 kN; P150°:94.3 kN; da:200.025 mm; J1:114.3 mm; Cap bolt recommended tightening torque:271.2 N·m; H:401.637 mm; |
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
CAT E70B Slewing Bearing Video