| No. | Brand | C | K | A | T | a | G | h | b |
| 1989 | - | - | - | - | - | - | - | - | - |
| JSO-G02-2BA-20 | DAIKIN | - | - | - | - | - | - | - | - |
| 33213 | fag | - | - | - | - | - | - | - | - |
| D1VW4CNYC56 | Parker | - | - | - | - | - | - | - | - |
| 395-CS | SKF | - | - | 15 mm | - | - | Tr 1060x8 | - | - |
| 2000 | INA | - | 10 mm | - | - | - | - | - | - |
| 25522 | koyo | - | - | - | - | - | - | - | - |
| 30304 | Timken | - | - | - | - | - | 119.786 mm | - | - |
| 12mm | - | - | - | - | - | - | - | 51.594 mm | - |
| 2-Jaw | - | - | - | - | - | - | - | - | - |
| 3 | - | - | - | - | - | - | - | - | - |
| 1312-TVH | fag | - | - | - | - | - | - | - | 2.6 mm |
| 14" | - | 22 mm | - | - | 27.25 mm | - | - | - | - |
| 95% | - | - | - | - | - | - | - | - | - |
| NU308E | - | - | - | - | - | - | - | - | - |
| AS206 | NSK | - | - | - | - | - | - | - | - |
| +0.25mm | - | - | - | - | - | - | - | - | - |
| 2x | TRW | - | - | - | - | - | - | - | - |
| 4*16*5mm | - | 22 mm | - | - | - | - | - | - | - |
| 510084 | Timken | - | - | - | - | - | - | - | - |
| 62306-2RS-M | INA | - | - | - | - | - | - | - | - |
| 1823160070 | - | - | - | - | - | - | - | - | - |
| 1-Mcp | - | - | - | - | 53.975 mm | - | - | - | - |
| VU140325 Slewing Bearing Manufacturer 270x380x35mm | with cylindrical bore:4 500 min-1; Pu:29.900 kN; rs Dynamic (Cr):2.1 mm; Grease:1.230 kN; D:160 mm; with tapered bore:1315 ; B:37 mm; d:75 mm; Oil:3 800 min-1; Static (Cor):81.680 kN; |
| 2425U340F1 Swing Bearing For KOBELCO SK400LC III Excavator | Cap bolt:5/8-11 UNC; R1:73.025 mm; Cap bolt recommended tightening torque:298.3 N·m; P60°:178 kN; Stabilizing ring:2 x 38151-26; PosiTrac Plus contact element:2 x B10724-117; Cap bolt, SAE grade:8; H2:52.388 mm; Labyrinth ring:2 x LOR 115; Ca:62.789 mm; |
| 797/870K Slewing Bearing | A1:158.75 mm; Cap bolt:4 x 3/4-10 UNC; Adapter sleeve assembly:SNW 3036x6.3/8; H1:169.875 mm; J max.:488.95 mm; R1:104.775 mm; ba:68.263 mm; N1:28.575 mm; Bearing limiting speed:2600 r/min; P60°:226 kN; |
| R8-35N3 Crossed Roller Slewing Rings With Internal Gear | |
| L6-25N9Z Four-point Contact Ball Slewing Rings With Internal Gear | T:80.962 mm; Calculation factor Y0:0.9; Cb min.:17 mm; Limiting speed:850 r/min; Calculation factor Y:1.7; Mass bearing:59.5 kg; ra max.:6 mm; da max.:522 mm; rb max.:3.1 mm; Da max.:618 mm; |
| NRXT5013 Crossed Roller Bearing 50x80x13mm | da min.:32 mm; Da max.:55 mm; Fatigue load limit Pu:0.72 kN; d:25 mm; Calculation factor Y0:0.76; r1,2 min.:1.1 mm; d2 ≈:32.26 mm; Calculation factor X:0.41; Calculation factor A:0.00158; r3,4 min.:0.6 mm; |
| RB1250110UUC0 High Precision Cross Roller Ring Bearing | Hexagonal key size for grub screw N:3.175 mm; A1:13 mm; J6:98.5 mm; J:116.5 mm; N:11.5 mm; J7:12.5 mm; Housing:FYTB 506 M/VZ033; Db1:77 mm; N4:2 mm; Da:76.2 mm; |
| VLU301155 Four Contact Ball Slewing Ring 1005x1300x90mm | rb max.:1 mm; da min.:74.6 mm; ra max.:1 mm; d:70 mm; Basic dynamic load rating C:76.5 kN; Basic static load rating C0:93 kN; r3,4 min.:1 mm; Da max.:104 mm; da max.:78 mm; Mass bearing:0.53 kg; |
| XSU140644 Crossed Roller Slewing Ring Slewing Bearing | Pu:5.880 kN; d2:32 mm; rs (min):1 mm; a:14 mm; C:13 mm; r2s (min):0.3 mm; r1s (min):1 mm; Dynamic (Ca):39.8 kN; Static (Coa):48.2 kN; B:17 mm; |
| 40 mm x 68 mm x 15 mm 013.45.1250 Slewing Bearing | α:124 °; h:31 mm; D:40 mm; Tolerance shaft:e7; D1:50 mm; Coefficient of friction µ max.:0.15; B1:5 mm; Mass bushing:0.13 kg; B:20 mm; Specific dynamic load factor K:25 N/mm²; Size (mm):40 mm x 68 mm x 15 mm ; |
CT 60 Slewing Bearing Video