| VSU 250855 Four Point Contact Slewing Ring | Calculation factor kr:0; Da min.:1103 mm; s max.:13.5 mm; d:950 mm; Basic static load rating C0:1560 kN; r1,2 min.:5 mm; Basic dynamic load rating C:792 kN; Da max.:1130 mm; Limiting speed:0 r/min; da max.:1088 mm; |
| 012.40.1000 Slewing Bearing | P150°:87.2 kN; End plug (suffix Y):EPR 27; Eye bolt:2 x 3/8-16 UNC; Cap bolt recommended tightening torque:298.3 N·m; P90°:149 kN; P120°:94.3 kN; da:123.825 mm; R1:79.375 mm; Stabilizing ring:2 x 36053-50; H:257.175 mm; |
| 1787/1060G2 Slewing Beairng | D:62.0000 mm; B:14.00 mm; Oil Speed Rating Open/Shielded n2:13000 rpm; Grease Speed Rating Open/Shielded n1:10000 rpm; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:10200 N; d:35.000 mm; Basic Dynamic Radial Load Rating C:15800 N; Sealed Speed Rating n3:7000 rpm; Accessories:Two Seals; |
| CRBA40035 Cross-Roller Ring (400x480x35mm) Rotary Units Of Manipulators Use | d:35 mm; Calculation factor f2D:1.09; r1,2 min.:1 mm; Mass bearing:0.15 kg; Ball diameter Dw:7.938 mm; Calculation factor f:1.06; Static axial stiffness, preload class A:36 N/µm; Static axial stiffness, preload class C:64 N/µm; d1:43.7 mm; Calculation factor f1:1; |
| 9E-1Z25-0576-1322 Crossed Roller Slewing Ring | P90°:149 kN; L:419.1 mm; P60°:249 kN; Cap bolt, SAE grade:8; A1:120.65 mm; Da:210 mm; R2:30.163 mm; ba:53.975 mm; Housing:SSAFS 028 KA; Adapter sleeve assembly:SNW 3028x5; |
| 231.20.0900.503 Four Contact Ball Slewing Ring 834x1046x56mm | P120°:249 kN; P90°:400 kN; Eye bolt:2 x 1/2-13 UNC; Taconite seal:TER 666; da:184.15 mm; Pa:82.7 kN; Housing:SSAFS 640; h:87.313 mm; Cap bolt, SAE grade:8; ba:103.188 mm; |
| 75 mm x 130 mm x 25 mm SX011868 Cross Roller Bearing 340x420x38mm | r1,2 min.:40 mm; Fatigue load limit Pu:9300 kN; D1 ≈:1670.7 mm; Mass bearing:7510 kg; Design variant/feature:BC4.14/W33WI; D:1780 mm; Basic dynamic load rating C:52300 kN; F:1493 mm; K:12 mm; C:1200 mm; Size (mm):75 mm x 130 mm x 25 mm ; |
| Cross Roller Bearing 615895A Thrust Tapered Roller Bearing 901.7x1117.6x82.555mm | Cap bolt recommended tightening torque:400 N·m; Mass pillow block:63.9 kg; Housing:SAF 034 KA; Adapter sleeve assembly:SNW 3034x6; Bearing limiting speed:2800 r/min; ba:64.294 mm; da:152.4 mm; N1:28.575 mm; h:43.656 mm; Cap bolt, SAE grade:5; |
| Excavator Slewing Ring For KOMATSU PC200-7B, Part Number:20Y-25-21200 | Q180°:2100 kN; P180°:3000 kN; L:950 mm; P90°:3600 kN; P55°:7500 kN; H:675 mm; Lock nut:HM 56 T; Appropriate attachment bolt, rec. tightening torque:2280 N·m; Bearing (basic designation):22356; Initial grease fill, 40%:9.4 kg; |
| RA20013 Crossed Roller Bearings 200x226x13mm | D:1220 mm; ra max.:8 mm; B:475 mm; Design variant/feature:NNU/W33; rb max.:8 mm; Da max.:1180 mm; F:866 mm; Mass bearing:2230 kg; da min.:790 mm; b:22.3 mm; |