No. | Brand | C | K | A | T | a | G | h | b |
22228KBR | - | - | - | - | - | - | - | - | - |
Nh4cl | - | - | - | - | - | - | - | - | - |
607Z | - | - | - | - | - | - | - | - | - |
99% | - | - | - | - | - | - | - | - | - |
TB22432H | - | - | - | - | - | - | - | - | - |
9mm, | - | - | - | - | - | - | - | - | - |
12kw | - | - | - | - | - | - | - | - | - |
29% | - | - | - | - | - | - | - | - | - |
NSR250 | - | - | - | - | - | - | 129.692 mm | - | - |
85cm | - | - | - | - | - | - | 529.006 mm | - | - |
32005J | koyo | - | 4.5 mm | - | - | - | M 130x2 | - | - |
12mm | - | - | - | - | - | - | - | - | - |
4] | - | - | - | - | - | - | - | - | - |
C6.4 | - | - | - | - | - | - | - | - | - |
8Pcs | - | - | - | - | - | - | - | - | - |
1992-1994 | Timken | - | - | - | - | - | - | - | - |
MOT-FC-EV2 | Rexroth | - | 7.5 mm | - | - | - | M 120x2 | - | 13.9 mm |
5022 | - | 83 mm | - | - | - | - | - | - | - |
2-3mm | INA | - | - | - | - | - | - | - | - |
1PC | - | - | - | - | - | - | - | - | - |
KH-125E Slewing Bearings (8.625x16.5x2.5inch) Machine Tool Bearing | d3 max.:195.402 mm; d1:133.35 mm; Lock washer:W 30; Sleeve:S 130x5.1/4; B1:142.519 mm; Hydraulic nut:HMVC 30E; B4:28.575 mm; d:150 mm; Mass adapter sleeve assembly:8.15 kg; Threads per inch:12; |
XSA140644-N Crossed Roller Bearings 574x742.3x56mm | B:40.00 mm; Basic Static Radial Load Rating Co:60000 N; Fillet Radius ra:1.00 mm; D:90.0000 mm; Grease Speed Rating n1:5600 rpm; d:50.000 mm; Oil Speed Rating n2:6800 rpm; Basic Dynamic Radial Load Rating C:60500 N; Fillet Radius rb:0.60 mm; |
014.75.3150 Slewing Bearing | Fillet Radius ra:2.50 mm; Accessories:Snap-Ring; B:47.00 mm; Basic Dynamic Radial Load Rating C:194000 N; D:215.0000 mm; d:100.000 mm; Oil Speed Rating Open/Shielded n2:3000 rpm; Basic Static Radial Load Rating Co:212000 N; Grease Speed Rating Open/Shielded n1:2500 rpm; |
010.45.1400 Slewing Bearing | Mass bearing unit:22.5 kg; da:100.013 mm; Limiting speed:2200 r/min; Basic dynamic load rating C:426 kN; s:38.497 mm; B:80.169 mm; J max.:333.375 mm; L:387.35 mm; S:0.794 mm; J1:57.15 mm; |
YRT50 Rotary Table Bearings (50x126x30mm) Turntable Bearing | da:60.325 mm; Ca:37.008 mm; Housing:FSAF 515; Cap bolt recommended tightening torque:81.3 N·m; Bearing:1215 K; A2:193.675 mm; P90°:32.5 kN; R1:46.038 mm; R2:21.431 mm; J min.:219.075 mm; |
2797/3780G2 Bearing 3668.24x4500x260mm | b:22.3 mm; B2 ≈:360 mm; da min.:480 mm; d1:440 mm; G:Tr 480x5; B1:349 mm; d2 ≈:574 mm; Calculation factor Y1:1.9; D1 ≈:706 mm; D:830 mm; |
CRBC 13025 Crossed Roller Bearings 130x190x25mm Industrial Robots Arm Use | Appropriate attachment bolt size G:0.75 in; Cap bolt, SAE grade:8; H:244.475 mm; Bearing:23026 CCK/W33; Adapter sleeve assembly:SNW 3026x4.7/16; P150°:59.6 kN; da:112.713 mm; Eye bolt:2 x 3/8-16 UNC; J min.:320.675 mm; A1:120.65 mm; |
797/2500G2 Bearing 2500x2980x180mm | H1:152.4 mm; Bearing:22228 CCK/W33; Housing:SAFS 528; Cap bolt recommended tightening torque:813.5 N·m; Da:250 mm; P150°:105 kN; Taconite seal:TER 123; A1:149.225 mm; End plug (suffix Y):EPR 27; P120°:116 kN; |
023.50.2000 Slewing Bearing | Grease Speed Rating n1:7000 rpm; d:30.000 mm; B:27.00 mm; Accessories:Two Shields & Snap-R; Basic Static Radial Load Rating Co:28000 N; Fillet Radius ra:1.00 mm; Sealed Speed Rating n3:7000 rpm; Oil Speed Rating n2:9500 rpm; D:62.0000 mm; Basic Dynamic Radial Load Rating C:30300 N; |
123.28.800 Slewing Bearing | rs:0.3 mm; Grease:25 000 min-1; Bearing designation:6001 ; Dynamic (Cr):5.094 kN; ra:0.3 max; da:14 min; Weight:0.022 kg; Oil:30 000 min-1; d:12 mm; B:8 mm; |
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
XR882054 Cross Tapered Roller Bearing 901.7x1117.6x82.555mm Video