| 013.40.1120.12 Bearing 944x1242x100mm | RG:1 NPT; Bearing:22238 CCK/W33; Cap bolt recommended tightening torque:1735.4 N·m; End plug (suffix Y):EPR 21; da:173.037 mm; Cap bolt:1 1/8-7 UNC; P120°:151 kN; Housing:SSAFS 538; ba:78.581 mm; Eye bolt:2 x 1/2-13 UNC; |
| 012.45.1600.12K Bearing 1460x1808x110mm | D:120 mm; Mass bearing:1.04 kg; Reference speed:4000 r/min; d:90 mm; Limiting speed:4800 r/min; db:99.3 mm; Db:101 mm; Basic dynamic load rating C:67.1 kN; Basic static load rating C0:190 kN; s max.:1 mm; |
| VRT 2110A Cross Roller Table 30x110x12mm | Mass needle roller and cage assembly:0.0016 kg; U:10 mm; Fw:10 mm; Limiting speed:32000 r/min; Reference speed:28000 r/min; Basic static load rating C0:5.7 kN; Basic dynamic load rating C:4.57 kN; Fatigue load limit Pu:0.63 kN; Ew:13 mm; |
| RB11020 Cross Roller Bearing | Q120°:5800 kN; Locating ring:2 x FRB 30.5/680; ba max.:238 mm; Q150°:3350 kN; ba min.:163 mm; Initial grease fill, 40%:19 kg; Q180°:2900 kN; H:810 mm; ATK:590 mm; db:500 mm; |
| 280.30.0900.013 Four Contact Ball Slewing Ring 805x1100x90mm | Mass inner ring:0.11 kg; r, r1,2 min.:1 mm; B:20 mm; d:40 mm; F:50 mm; |
| VLI200544N Flange Slewing Ring 444x648x56mm | Calculation factor Y1:1.9; 2B:92 mm; D:130 mm; Reference speed:3200 r/min; d:60 mm; Calculation factor Y0:1.8; da max.:74 mm; Calculation factor Y2:2.9; T:97 mm; Mass bearing pair:6.06 kg; |
| 1797/2600G2K2 Slewing Beairng | Radial shaft seal with a low cross-sectional height, single lip:G 40x47x4; Basic static load rating C0:95 kN; Limiting speed:6300 r/min; Inner ring IR series:IR 35x40x20.5; Reference speed:5000 r/min; Fatigue load limit Pu:11.6 kN; Basic dynamic load rating C:33.6 kN; Mass bearing:0.06 kg; r min.:0.8 mm; D:47 mm; |
| QY-8B Slewing Bearing | Oil Speed Rating n2:8000 rpm; Sealed Speed Rating n3:6000 rpm; Basic Dynamic Radial Load Rating C:37700 N; Basic Static Radial Load Rating Co:27500 N; D:72.0000 mm; B:27.00 mm; Grease Speed Rating n1:6000 rpm; Accessories:Shield & Seal & Snap; d:35.000 mm; Fillet Radius ra:1.00 mm; |
| HS6-37N1Z Slewing Bearings (33.133x41.25x2.2inch) With Internal Gear | Basic Static Radial Load Rating Co:19000 N; Weight W:1.00 kg; Dimension D2:82.6 mm; Shaft Diameter D:40 mm; Dimension N:19.8 mm; Dimension H:29.4 mm; Dimension J:9.5 mm; Dimension G:16.7 mm; Dimension C:101.6 mm; Width A:41.3 mm; |
| 6397/2800G2 Slewing Bearing 2800x3360x220mm | Mass pillow block:213 kg; P60°:416 kN; Cap bolt:1 1/8-7 UNC; Bearing:22238 CC/W33; P120°:151 kN; db:212.725 mm; Eye bolt:2 x 3/8-16 UNC; A2:276.225 mm; PG:1/4 NPT; H:398.462 mm; |