| RK6-37N1Z Slewing Bearings (33.133x41.26x2.205inch) With Internal Gear | d:30 mm; r3,4 min.:1.1 mm; B1:5 mm; d1 ≈:44.95 mm; B2:8.5 mm; Mass angle ring:0.042 kg; |
| LC40FU0001F1 Swing Bearing For KOBELCO SK300LC IV Excavator | B:39.70 mm; Basic Static Radial Load Rating Co:125000 N; Grease Speed Rating n1:3200 rpm; Accessories:Two Shields; D:125.0000 mm; Oil Speed Rating n2:4300 rpm; Sealed Speed Rating n3:3200 rpm; Basic Dynamic Radial Load Rating C:101000 N; Fillet Radius ra:1.50 mm; d:70.000 mm; |
| 1799/525 Bearing 525x725x80mm | rs (min):2.5 mm; Dynamic (Ca):260 kN; Pu:49.600 kN; C:34 mm; T:43 mm; D:160 mm; r2s (min):0.6 mm; d2:105 mm; B:43 mm; Static (Coa):445 kN; |
| 134.50.550 Slewing Bearing | r, r1,2 min.:1.1 mm; B:40 mm; d:160 mm; Mass inner ring:1.2 kg; F:175 mm; |
| 797/2190G Slewing Bearing | d:15.000 mm; Basic Static Radial Load Rating Co:9300 N; Sealed Speed Rating n3:11000 rpm; Grease Speed Rating n1:11000 rpm; Basic Dynamic Radial Load Rating C:15100 N; B:19.1 mm; D:42.0000 mm; Oil Speed Rating n2:15000 rpm; Accessories:One Seal; Fillet Radius ra:1.00 mm; |
| 1797/1100G Bearing 1100x1440x115mm | Fatigue load limit Pu:0.655 kN; N:14 mm; Housing:FYTB 507 M; Housing material:Cast iron; Recommended tightening torque for grub screw:6.5 N·m; DN:6.5 mm; RG:1/4-28 UNF; GN:1/4-28 SAE-LT; A:34.5 mm; Da:88.9 mm; |
| CRBA10020 Crossed Roller Bearing (100x150x20mm) Industrial Robots Use | Fillet Radius rb:0.30 mm; Oil Speed Rating n2:9000 rpm; Basic Dynamic Radial Load Rating C:24200 N; Fillet Radius ra:1.00 mm; d:60.000 mm; Basic Static Radial Load Rating Co:22800 N; B:13.00 mm; D:85.0000 mm; Grease Speed Rating n1:7500 rpm; |
| 132.40.1250 Slewing Beairng | a:5.556 mm; L:222.25 mm; Attachment bolt diameter G:4 x 19.05; A:84.138 mm; A6:28.575 mm; A5:42.069 mm; s:36.513 mm; Mass bearing unit:18.4 kg; Basic dynamic load rating C:325 kN; da:87.313 mm; |
| PC200-8 Slewing Bearing | RG:3/8 NPT; Lock washer:W 18; Initial grease fill:286.33 g; db:104.775 mm; Labyrinth ring (dc shaft position):LOR 191; R2:27.781 mm; A1:98.425 mm; h:38.1 mm; Mass pillow block:20 kg; Appropriate attachment bolt size G:0.75 in; |
| A12-47P2 Four Point Contact Ball Slewing Bearings SLEWING RINGS | L:419.1 mm; H2:52.388 mm; N1:22.225 mm; S:4.763 mm; Da:200 mm; Mass pillow block:52.2 kg; J min.:320.675 mm; Bearing:22222 EK; Stabilizing ring:SR-22-19; Cap bolt recommended tightening torque:298.3 N·m; |