No. | Brand | C | K | A | T | a | G | h | b |
Sk200-8 | - | - | - | - | - | 18.4 mm | - | - | - |
6204 | Nachi | - | - | - | - | 4.5 mm | - | - | - |
(2) | thk | - | - | - | - | - | - | - | - |
4ft | - | - | - | - | - | - | - | - | - |
1220X2440 | - | - | - | - | - | - | - | - | 25 mm |
(JZ-T102) | - | - | - | - | - | - | - | - | - |
20207K.T.C3 | fag | 80 mm | - | - | - | - | - | - | 13.5 mm |
Gk120 | - | - | - | - | - | - | - | - | - |
Nmrv040/050 | - | - | - | - | - | - | - | - | - |
NJ316 | NSK | - | - | - | - | - | - | - | - |
6208Z | koyo | - | - | 39 mm | - | - | - | - | - |
3 | - | - | - | - | - | - | - | - | - |
218 | - | - | - | - | - | - | - | - | - |
33210 | - | - | - | - | - | - | - | - | - |
18mm | - | - | - | - | - | - | - | - | - |
NK16/16 | - | - | - | - | 610 mm | - | - | - | - |
3 | - | - | - | - | - | - | - | - | - |
211-0588 | - | - | - | - | - | - | - | - | - |
TL194 | - | - | - | - | - | - | - | - | - |
18mm | INA | - | - | - | - | - | - | - | - |
99% | - | - | - | - | - | - | - | - | - |
6007641 Swing Bearing For HITACHI EX270LC Excavator | Cap bolt recommended tightening torque:400 N·m; R2:46.831 mm; J max.:708.025 mm; da:241.3 mm; Bearing:23052 CCK/W33; L:831.85 mm; N1:41.275 mm; Labyrinth ring:2 x LOR 178; H:474.663 mm; Stabilizing ring:2 x A8898; |
132.32.800 Slewing Bearing | Eye bolt:3/8-16 UNC; J max.:441.325 mm; Ca:77.8 mm; Housing:SAF 528; P60°:249 kN; Bearing:22228 CCK/W33; h:51.594 mm; N1:28.575 mm; Cap bolt:2 x 1-8 UNC; Da:250 mm; |
CRB20035UUT1 High Precision Cross Roller Ring Bearing | Speed Rating-Open and Shielded-Grease OSG:9000 rpm; Basic Radial Load Rating-Dynamic DC:6070 N; D:72.0000 mm; Basic Radial Load Rating-Static SCO:3440 N; Speed Rating-Open and Shielded-Oil OSO:11000 rpm; Fillet Radius ra:1.00 mm; B:17.00 mm; Variant:SFFX Two Shields; Inside Diameter D:30.1625 mm; Adapter Sleeve AS:SNW7; |
Slewing Ring For Excavator HITACHI ZX200-3, Part Number:9260971 | Static axial stiffness, preload class B:35 N/µm; Calculation factor f0:10.4; r3,4 min.:0.2 mm; Calculation factor f2B:1.04; Calculation factor fHC:1; d2:35.6 mm; Basic dynamic load rating C:7.15 kN; Basic static load rating C0:4.55 kN; Db max.:45.6 mm; Calculation factor f2A:1; |
797/845G2 Slewing Bearing | Accessories:Mast Guide Type- 307; Basic Interchange NDH:-; Basic Radial Load Rating-Dynamic DC:13600 lbf; Basic Interchange NSK:-; Basic Interchange MCGILL:-; Basic Interchange:-; Basic Interchange SPLIT:-; Basic Radial Load Rating-Static SCO:48600 lbf; Basic Interchange BCA:-; |
VSI250755N Slewing Bearings (610x855x80mm) Turntable Bearing | d:25.000 mm; B:20.60 mm; Basic Dynamic Radial Load Rating C:20800 N; Accessories:One Seal; Sealed Speed Rating n3:8000 rpm; Basic Static Radial Load Rating Co:14000 N; Oil Speed Rating n2:11000 rpm; D:52.0000 mm; Grease Speed Rating n1:8000 rpm; Fillet Radius ra:1.00 mm; |
RB90070 Precision Cross Roller Bearing | R1:163.512 mm; RG:1 NPT; Da:419.999 mm; Adapter sleeve assembly:SNW 140x7.1/8; Eye bolt:2 x 1/2-13 UNC; Housing:SSAFS 640; S:4.763 mm; A2:379.425 mm; Taconite seal:TER 664; Cap bolt, SAE grade:8; |
VSA200844N Slewing Bearings (772x950.1x56mm) Turntable Bearing | Grease Speed Rating Open/Shielded n1:17000 rpm; Basic Static Radial Load Rating Co:5000 N; Sealed Speed Rating n3:11000 rpm; d:20.000 mm; Basic Dynamic Radial Load Rating C:9360 N; D:42.0000 mm; Accessories:Snap-Ring; Fillet Radius ra:0.64 mm; B:12.00 mm; Oil Speed Rating Open/Shielded n2:20000 rpm; |
NRXT20030 Crossed Roller Bearing 200x280x30mm | P90°:77 kN; End plug (suffix Y):EPR 11; H2:50.8 mm; Labyrinth ring (dc shaft position):LOR 191; J min.:304.8 mm; Lock nut:AN 18; H1:120.65 mm; P120°:48.9 kN; da:90 mm; dc:85.725 mm; |
I.505.20.00.C Four Contact Ball Slewing Ring 327x518x56mm | Housing washer:GS 81218; Eb:129 mm; Shaft washer:WS 81218; Mass roller and cage thrust assembly:0.54 kg; Fatigue load limit Pu:90 kN; d:90 mm; D:135 mm; Basic dynamic load rating C:232 kN; Basic static load rating C0:865 kN; Limiting speed:2000 r/min; |
RU148XUUCC0P5 High Precision Crossed Roller Bearing Video