No. | Brand | C | K | A | T | a | G | h | b |
6301-2RS | fag | - | - | - | - | - | M 52x3 | 195 mm | - |
CS50 | - | - | 12 mm | - | - | - | - | - | - |
80 | - | - | - | - | - | - | - | - | - |
607Z | - | - | - | - | - | - | - | - | - |
828 | - | 12 mm | - | - | - | - | - | - | - |
6200C3 | SKF | - | - | - | - | - | - | - | - |
1823160070 | - | - | - | - | - | - | - | - | - |
18 | - | - | - | - | - | - | - | - | - |
250 | Danfoss | - | - | - | - | - | - | - | - |
JS-G01-2N | DAIKIN | - | - | - | - | - | - | - | - |
A1 | - | - | - | - | - | - | - | - | - |
16Pc | - | - | - | - | - | - | - | - | - |
DT125 | - | - | - | - | - | - | - | - | - |
1200*1000 | - | - | 12 mm | - | - | - | - | - | 22.3 mm |
99.5% | - | - | - | - | - | - | - | - | - |
32005J | koyo | - | 4.5 mm | - | - | - | M 130x2 | - | - |
SL185015-C3 | INA | - | - | - | - | - | - | - | - |
21% | - | - | - | - | - | - | - | - | - |
20Ton | - | - | - | - | - | - | - | - | - |
1306 | - | - | - | 84.138 mm | - | 5.556 mm | - | - | - |
A2F | - | - | - | 114.3 mm | - | - | - | - | - |
E.1400.32.00.C Four Contact Ball Slewing Ring 1105x1400x90mm | |
023.30.900 Slewing Bearing | DN:6.5 mm; Bearing:YET 206-102; Thread grub screw G2:5/16-24 UNF; J6:98.5 mm; B4:5.95 mm; Recommended tightening torque for grub screw:6.5 N·m; Da:76.2 mm; Recommended diameter for attachment bolts, inch G:0.375 in; N4:2 mm; End cover:ECY 206; |
CRBA03010 Crossed Roller Ring (30x55x10mm) Precision Robotic Arm Use | Comparative radial load rating CF:1080 kN; Fatigue load limit Pu:880 kN; d1 ≈:392 mm; D:488.95 mm; Comparative axial load rating CFa:179 kN; r1,2 min.:1.5 mm; Calculation factor Y1:2; Basic dynamic load rating C:4130 kN; Mass bearing:195 kg; d:355.6 mm; |
RU 124 Crossed Roller Bearing 80x165x22mm | Fatigue load limit Pu:2500 kN; Basic static load rating C0:36500 kN; Design variant/feature:TQON/GW; Basic dynamic load rating C:17600 kN; Thrust factor K:1.84; T:610 mm; D:1040 mm; Calculation factor Y0:2.2; Mass bearing:1970 kg; Comparative radial load rating CF:4400 kN; |
014.75.3550 Slewing Bearing | B:29 mm; rb max.:1 mm; Calculation factor X:0.35; Da max.:109 mm; Reference speed:7000 r/min; Calculation factor Y1:0.55; d1 ≈:80.3 mm; d:55 mm; Calculation factor Y0:0.52; Calculation factor e:1.14; |
RB60040 Cross Roller Bearings 600*700*40mm | H2:85.725 mm; J1:127 mm; H1:209.55 mm; RG:1 NPT; Ca:129.794 mm; End plug (suffix Y):EPR 19; dc:163.512 mm; PG:1/4 NPT; Pa:93.9 kN; P180°:145 kN; |
I.1200.32.00.C Four Contact Ball Slewing Ring 912x1200x90mm | da:160 mm; J max.:488.95 mm; J min.:441.325 mm; Labyrinth ring (dc shaft position):LOR 142; End plug (suffix Y):EPR 18; Cap bolt, SAE grade:5; Eye bolt:2 x 3/8-16 UNC; PG:1/4 NPT; Initial grease fill:793.8 g; Ca:113.817 mm; |
NRXT6013DD/ Crossed Roller Bearings (60x90x13mm) Industrial Robots Bearing | Basic Static Radial Load Rating Co:6800 N; Oil Speed Rating n2:18000 rpm; d:12.000 mm; Grease Speed Rating n1:14000 rpm; D:37.0000 mm; Sealed Speed Rating n3:14000 rpm; B:19.1 mm; Basic Dynamic Radial Load Rating C:11700 N; Fillet Radius ra:1.00 mm; Accessories:Two Shields & Snap-R; |
Slewing Ring For Excavator KOBELCO 40SR-3, Part Number:PH40F00004F1 | Stabilizing ring:SR-17-14; Ca:45.796 mm; Cap bolt:2 x 5/8-11 UNC; PG:1/8 NPT; R2:22.225 mm; Housing:SSAFS 517; P180°:32 kN; Adapter sleeve assembly:SNW 17x2.15/16; Cap bolt recommended tightening torque:298.3 N·m; H2:38.1 mm; |
R200-5 Bearings | B1:mm; Oil:12 600 min-1; D:52 mm; with tapered bore:1205 ; rs Dynamic (Cr):1 mm; d:25 mm; Pu:3.350 kN; B:15 mm; Grease:0.150 kN; with cylindrical bore:15 000 min-1; |
VSU250955-ZT Slewing Bearing / Four Point Contact Bearing 855x1053x63mm Video