No. | Brand | C | K | A | T | a | G | h | b |
19124MS | Parker | - | - | - | - | - | - | - | - |
61815 | - | - | - | - | - | - | - | - | - |
6002RS | - | - | - | - | - | - | - | - | - |
6016 | NTN | - | - | - | - | - | - | - | - |
23pc | - | - | - | - | - | - | - | - | - |
2x | TRW | - | - | - | - | - | - | - | - |
HS7012-E-T-P4S | - | - | - | - | - | - | - | - | - |
24048 | SKF | - | - | - | - | - | - | - | - |
DH55 | INA | - | - | - | - | - | M 36x3 | 130 mm | - |
IR-384828 | koyo | - | - | - | - | - | - | - | - |
E0 | - | - | - | - | - | - | - | - | mm |
4D95L | - | - | - | - | - | - | - | - | - |
MHA03 | YUKEN | - | - | - | - | - | - | - | - |
(2) | Nachi | - | - | - | - | - | - | 46.831 mm | - |
K3V180DT | - | - | - | - | - | - | - | - | - |
2 | INA | - | - | - | - | - | - | - | - |
3mm | - | - | - | - | - | - | - | - | - |
6004-2RS | - | - | - | - | 648.002 mm | - | - | - | - |
P11 | - | - | - | - | - | - | - | - | - |
6326-M-C/3 | - | - | - | - | - | - | - | - | - |
17X40X12 | - | - | - | - | - | - | - | - | - |
Mhd112c024npoln | Rexroth | - | - | - | - | - | - | - | - |
6005Dduc3 | NSK | - | - | - | - | - | - | - | - |
1200X1000mm | - | - | - | - | - | - | - | - | - |
(360LC-7) | - | - | - | - | - | - | - | - | - |
91-20 0741/1-07143 Four-point Contact Ball Slewing Bearing With External Gear | Oil Speed Rating n2:4300 rpm; Basic Static Radial Load Rating Co:80000 N; Fillet Radius ra:2.00 mm; B:26.00 mm; Basic Dynamic Radial Load Rating C:74100 N; d:105.000 mm; Grease Speed Rating n1:3300 rpm; D:160.0000 mm; |
XV80 Table/slewing Bearing 80x135x18mm | Reference speed:2800 r/min; C:53 mm; da max.:107 mm; Calculation factor Y:1.1; d:90 mm; Dimension series:5GD; Da max.:177.5 mm; Fatigue load limit Pu:69.5 kN; Db min.:179 mm; d1 ≈:141.5 mm; |
PC228/32 Slewing Bearing | l4 max.:284 mm; B:49 mm; α:6 °; Basic static load rating C0:530 kN; Specific dynamic load factor K:100 N/mm²; C1 max.:43 mm; G:M 56x4; r1 min.:1 mm; l3 min.:80 mm; Mass rod end:10.5 kg; |
VSI 250855-N Four Point Contact Slewing Ring | B1:59 mm; d3:75 mm; D:120 mm; Da max.:109 mm; d1:50 mm; Calculation factor Y2:2.9; Calculation factor Y1:1.9; Mass bearing + sleeve:2.85 kg; B4:12.5 mm; D1 ≈:102 mm; |
Slewing Ring For Excavator HITACHI EX220-2, Part Number:9154037 | D:72.0000 mm; Basic Static Radial Load Rating Co:29000 N; Fillet Radius ra:1.00 mm; Grease Speed Rating n1:6300 rpm; Basic Dynamic Radial Load Rating C:41600 N; Accessories:Shield & Seal; B:30.20 mm; Sealed Speed Rating n3:6300 rpm; d:30.000 mm; Oil Speed Rating n2:8500 rpm; |
1797/1250G2 Slewing Beairng | Basic Static Radial Load Rating Co:34500 N; Oil Speed Rating n2:7500 rpm; B:38.10 mm; Basic Dynamic Radial Load Rating C:49400 N; D:80.0000 mm; d:35.000 mm; Sealed Speed Rating n3:5600 rpm; Grease Speed Rating n1:5600 rpm; Accessories:Shield & Seal; Fillet Radius ra:1.50 mm; |
A16-56N5 Four Point Contact Ball Slewing Bearing With Inernal Gear | da min.:219 mm; Basic static load rating C0:1270 kN; D:225 mm; d1:222 mm; Da max.:185 mm; r1,2 min.:1.1 mm; Fatigue load limit Pu:110 kN; ra max.:1.1 mm; Roller and cage thrust assembly:K 81136 M; Housing washer:GS 81136; |
CRBC 12025 Crossed Roller Bearings 120x180x25mm Industrial Robots Arm Use | Cap bolt, SAE grade:5; Bearing:1215 K; Cap bolt recommended tightening torque:81.3 N·m; Da:130 mm; RG:1/4 NPT; End plug (suffix Y):EPR 7; Cap bolt:2 x 1/2-13 UNC; J max.:244.475 mm; Initial grease fill:136.08 g; Mass pillow block:12.7 kg; |
1168/560 Bearing 560x780x60mm | Basic Static Radial Load Rating Co:1320000 N; Fillet Radius ra:3.00 mm; D:400.0000 mm; B:130.00 mm; Fillet Radius rb:1.00 mm; Basic Dynamic Radial Load Rating C:741000 N; Oil Speed Rating n2:1400 rpm; Grease Speed Rating n1:1200 rpm; d:220.000 mm; |
RE50025 Cross Roller Bearing 500x550x25mm | C:12 mm; r2 min.:0.3 mm; d1 ≈:24 mm; Da min.:30.9 mm; D:35 mm; α:6 °; Sealing solution:Triple-lip seals; Specific dynamic load factor K:100 N/mm²; M:2 mm; rb max.:0.3 mm; |
RB12016UU High Precision Cross Roller Ring Bearing Video