| No. | Brand | C | K | A | T | a | G | h | b |
| 02.50CH2AUS13AC4.750 | Parker | - | - | - | - | - | - | - | - |
| 600 | - | - | - | - | - | - | - | - | - |
| NCF1838V | - | - | - | - | - | - | 54.788 mm | - | - |
| GE18-PB | INA | - | - | - | - | - | - | 2.5 mm | - |
| 30X62X16 | - | - | - | - | - | - | - | - | - |
| 395-CS | SKF | - | - | 15 mm | - | - | Tr 1060x8 | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| NKXR35 | SKF | - | - | - | - | - | - | - | - |
| 35 | - | - | - | - | - | - | - | - | - |
| 512013 | Timken | - | - | - | - | - | - | - | - |
| 7783-20-2) | - | - | - | - | - | - | - | - | - |
| 1 | - | - | - | - | - | - | - | - | - |
| (NU426M) | - | - | - | - | - | - | - | - | - |
| 3329 | Timken | - | - | - | - | - | - | - | - |
| 2mm | - | - | - | - | - | - | - | - | - |
| 21% | - | - | - | - | - | - | - | - | - |
| 1220X2440 | - | - | - | - | - | - | - | - | 25 mm |
| 1092 | - | - | 10 mm | - | - | - | - | - | 15 mm |
| Nk2920tn | - | - | - | - | - | - | - | - | - |
| 5cbm | - | - | - | - | - | - | - | - | - |
| 4X8 | - | - | - | - | - | - | - | - | - |
| 23236CA | - | - | 12 mm | - | - | - | - | - | - |
| VLA301055N Four Contact Ball Slewing Ring 905x1198x90mm | Accessories:One Shield; Fillet Radius ra:0.30 mm; B:9.00 mm; Sealed Speed Rating n3:5180 rpm; D:72.0000 mm; Oil Speed Rating Open/Shielded n2:10000 rpm; Basic Static Radial Load Rating Co:7350 N; Basic Dynamic Radial Load Rating C:8320 N; d:55.000 mm; Grease Speed Rating Open/Shielded n1:8500 rpm; |
| 208-25-61100 Swing Bearing For Komatsu PC450-7K Excavator | d:55.000 mm; Sealed Speed Rating n3:3800 rpm; B:52.40 mm; Oil Speed Rating n2:5000 rpm; D:120.0000 mm; Basic Dynamic Radial Load Rating C:119000 N; Basic Static Radial Load Rating Co:122000 N; Grease Speed Rating n1:3800 rpm; Fillet Radius ra:2.00 mm; Accessories:One Seal; |
| CRBS1813 High Precision Cross Roller Bearing | D:540 mm; Da max.:514 mm; D1 ≈:458 mm; B1:205 mm; Calculation factor Y1:2.2; Basic static load rating C0:4550 kN; Fatigue load limit Pu:325 kN; Calculation factor Y2:3.3; Calculation factor Y0:2.2; B2 ≈:213 mm; |
| 209-25-71101 Swing Bearing For Komatsu PC750LC-6K Excavator | D:20 mm; Permissible sliding velocity v min.:0 m/s; h:15 mm; α:105 °; Mass bushing:0.019 kg; Coefficient of friction µ max.:0.15; Specific static load factor K0:45 N/mm²; B:10 mm; D1:25 mm; B1:3 mm; |
| 230.20.0500.013 Four Contact Ball Slewing Ring 434x648x56mm | d2:80 mm; E:mm; b1:mm; rs (min):2.1 mm; D:140 mm; r1s (min):2.1 mm; b:mm; Static (Coa):282 kN; Dynamic (Ca):185 kN; Pu:33.420 kN; |
| Crossed Roller Bearings XSA140414-N Standard Series 14, External Gear Teeth, Lip Seals On Both Sides | da:127 mm; A2:193.675 mm; Cap bolt:3/4-10 UNC; R1:87.313 mm; Da:250 mm; End plug (suffix Y):EPR 27; Housing:SSAFS 528; H1:152.4 mm; Stabilizing ring:SR-28-0; Cap bolt, SAE grade:8; |
| Crane Slewing Bearing China 3R13-95NXX5 Crane Slewing Ring | Basic dynamic load rating C:41.3 kN; Ew:65 mm; Fatigue load limit Pu:14.3 kN; Mass needle roller and cage assembly:0.077 kg; Reference speed:7000 r/min; Fw:60 mm; Limiting speed:8000 r/min; Basic static load rating C0:116 kN; U:30 mm; |
| W13-43P2 Four-point Contact Ball Slewing Rings | G2:G 1/4; Nut for removal:HM 31/850; G1:63 mm; d:800 mm; B1:438 mm; G:Tr 850x7; Hydraulic nut:HMV 170 E; Mass withdrawal sleeve:305 kg; A:15 mm; d1:750 mm; |
| 112.25.710 Slewing Bearing | D:190.0000 mm; Fillet Radius ra:2.50 mm; Basic Dynamic Radial Load Rating C:165000 N; B:43.00 mm; d:90.000 mm; Oil Speed Rating n2:4000 rpm; Basic Static Radial Load Rating Co:146000 N; Grease Speed Rating n1:3000 rpm; Fillet Radius rb:1.00 mm; |
| VRT 2080A Cross Roller Table 30x80x12mm | Initial grease fill:141.75 g; P60°:157 kN; Pa:10.9 kN; L:349.25 mm; Housing:FSAFS 518; Da:160 mm; End plug (suffix Y):EPR 11; H1:101.6 mm; h:38.1 mm; Cap bolt recommended tightening torque:149.1 N·m; |
RB15025UU High Precision Cross Roller Ring Bearing Video