No. | Brand | C | K | A | T | a | G | h | b |
72200 | Bower | - | - | - | - | - | - | - | - |
500 | fag | - | - | - | - | - | - | - | - |
6 | - | - | - | - | - | - | - | - | - |
NCF1838V | - | - | - | - | - | - | 54.788 mm | - | - |
2000 | - | - | - | - | - | - | - | - | - |
160 | INA | - | - | - | - | - | - | - | - |
EMC0512 | - | - | - | - | 22 mm | - | - | - | - |
232 | - | - | - | - | - | - | - | - | - |
21975 | - | - | - | - | - | - | Tr 710x7 | - | - |
S6205-2RS | - | - | - | - | - | - | - | - | - |
10 | - | - | - | - | - | - | - | - | - |
3 | - | - | - | - | - | - | M 42x3 | 145 mm | - |
(WD-104) | - | - | - | - | - | - | - | - | - |
6061-T6 | - | 28 mm | - | - | - | 32 mm | - | - | - |
4330205 | INA | - | - | - | - | - | - | - | - |
AN400 | - | - | - | - | - | - | - | - | - |
312 | TRW | - | - | - | - | - | M 45x1.5 | 2.5 mm | - |
1/2/3 | - | - | - | - | - | - | - | 42.069 mm | - |
500mg/H | - | - | - | - | - | - | - | - | 16.7 mm |
MSK071E-0300-NN-M1-UG1 | Rexroth | - | - | - | - | - | - | - | - |
6305 | NSK | - | - | - | 45.6 mm | - | - | - | - |
17Pcs | - | - | - | - | - | - | - | - | - |
NJ408 | - | - | - | - | - | - | - | - | - |
NF-417 | - | - | - | - | - | - | - | - | - |
15" | - | - | - | - | - | - | - | - | - |
5RZD0 | NTN | - | - | 226 mm | - | - | - | - | - |
220g | - | - | - | - | - | - | - | - | - |
10 | - | - | - | - | - | - | - | - | - |
No.ECHX06WI | - | - | - | - | - | 27 mm | - | - | - |
0.8mm | - | - | - | - | - | - | - | - | - |
1797/644 Bearing 664x929.6x75mm | Mass pillow block:48.6 kg; L:419.1 mm; A1:120.65 mm; P150°:66.7 kN; R2:30.163 mm; db:114.3 mm; S:4.763 mm; Appropriate attachment bolt size G:0.75 in; End plug (suffix Y):EPR 12; J min.:336.55 mm; |
VSU200414-N Slewing Bearing / Four Point Contact Bearing 342x486x56mm | Da:650 mm; N1:48 mm; H2:125 mm; da:410 mm; Locating ring:2 x FRB 21.5/650; Mass housing:595 kg; A2:425 mm; H1:380 mm; H:755 mm; Ca:200 mm; |
130.45.2800 Slewing Bearing | d3:260 mm; G:Tr 220x4; Lock washer / Locking clip:MS 3044; d2:229 mm; B:30 mm; B3:5 mm; h:9 mm; d1:237 mm; Mass lock nut:2.5 kg; b:20 mm; |
65 mm x 140 mm x 33 mm 7789/1290 Bearing 1290x1500x112.7mm | Basic dynamic load rating C:77 kN; Attachment bolt diameter G:12.7 mm; L:200.025 mm; S:0.794 mm; H:107.95 mm; H1:53.975 mm; s:25.4 mm; Limiting speed:1600 r/min; J min.:155.575 mm; da:42.862 mm; Size (mm):65 mm x 140 mm x 33 mm ; |
792/1000G2K Slewing Bearing | B:2 mm; M:115 mm; d2:152 mm; d1:135 mm; Mass lock washer:0.07 kg; f:14 mm; d:120 mm; |
9102726 Swing Bearing For HITACHI EX100-2 Excavator | Grease Speed Rating Open/Shielded n1:3600 rpm; Oil Speed Rating Open/Shielded n2:4300 rpm; Basic Dynamic Radial Load Rating C:108000 N; Basic Static Radial Load Rating Co:81500 N; Oil Speed Rating n2:4300 rpm; Fillet Radius ra:2.00 mm; Accessories:One Shield & Snap-Ri; D:170.0000 mm; Grease Speed Rating n1:3600 rpm; B:32.00 mm; |
CRBC 19025 Crossed Roller Bearings 190x240x25mm Industrial Robots Arm Use | r3,4 min.:3 mm; da max.:153 mm; Limiting speed:2600 r/min; Fatigue load limit Pu:73.5 kN; Calculation factor e:0.35; db min.:136.5 mm; Reference speed:2000 r/min; C:46 mm; Db min.:237 mm; ra max.:4 mm; |
209-25-71101 Swing Bearing For Komatsu PC750SE-6 Excavator | dk:100.33 mm; Design (sliding contact surface combination):Steel/steel; Specific static load factor K0:300 N/mm²; α:9 °; d1 ≈:85.852 mm; r1 min.:1 mm; Material constant KM:330; M:6.5 mm; r2 min.:1 mm; Sealing solution:-; |
RE 13025 UU Crossed Roller Bearing 130x190x25mm | Limiting speed:1900 r/min; db min.:90 mm; r1,2 min.:2 mm; Basic static load rating C0:325 kN; b:6 mm; Calculation factor Y2:4.6; Mass bearing + sleeve:4.1 kg; Da max.:139 mm; d2 ≈:98.2 mm; Basic dynamic load rating C:291 kN; |
9E-1B25-0640-0150 Four Point Contact Ball Slewing Ring | Fillet Radius ra:1.00 mm; Grease Speed Rating Open/Shielded n1:7000 rpm; D:90.0000 mm; Basic Static Radial Load Rating Co:23200 N; B:30.16 mm; d:50.000 mm; Basic Dynamic Radial Load Rating C:35100 N; Oil Speed Rating Open/Shielded n2:8500 rpm; Accessories:Removable Metal Shie; Sealed Speed Rating n3:4800 rpm; |
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
060.20.0844.500.01.1503 Slewing Ring Bearings For Turntables Video