No. | Brand | C | K | A | T | a | G | h | b |
6201LU | NTN | - | - | - | - | - | - | - | - |
20207K.T.C3 | fag | 80 mm | - | - | - | - | - | - | 13.5 mm |
4-28x50 | - | - | - | - | - | - | - | - | - |
XT600 | - | - | - | - | - | - | - | - | - |
6K | Parker | - | - | - | - | - | - | - | - |
2007-2008 | NSK | - | - | - | - | - | - | - | - |
850 | fag | - | - | - | - | - | - | - | - |
38mm | INA | - | - | - | - | - | - | - | - |
XJ900 | - | - | - | - | - | - | - | 212.5 mm | - |
61992-M | fag | - | - | - | - | - | - | - | - |
17216318 | - | - | - | - | - | - | - | - | - |
1989 | - | - | - | - | - | - | - | - | - |
28mm | - | 23.8 mm | - | - | - | - | - | - | 4.8 mm |
250 | - | - | - | 4.2 mm | - | - | - | - | - |
2m² | - | - | - | - | - | - | - | - | - |
18mm | - | - | - | - | - | - | - | - | - |
7922A5SN24TRDULP3 | NSK | - | - | - | 33.338 mm | 49.436 mm | - | - | - |
40X74X40 | - | - | - | - | - | 3 mm | - | 23 mm | - |
9 | - | - | - | - | - | - | - | - | - |
068Z3403 | Danfoss | - | - | - | - | - | - | - | - |
6207 | - | - | - | - | - | - | - | - | - |
RU148UUCC0 Crossed Roller Bearing 80x165x22mm | d2:152.4 mm; L:387.35 mm; Attachment bolt diameter G:19.05 mm; s:41.275 mm; B:116.681 mm; Basic dynamic load rating C:311 kN; da:101.6 mm; S:0.794 mm; J max.:333.375 mm; J min.:304.8 mm; |
1792/885K Slewing Bearing | Design (sliding contact surface combination):Steel/steel, heavy-d; Da max.:39.2 mm; b1:3.1 mm; Material constant KM:330; D:42 mm; Specific dynamic load factor K:100 N/mm²; α:4 °; d:25 mm; Mass plain bearing:0.13 kg; Da min.:36.9 mm; |
123.32.1400 Slewing Bearing | PG:1/4 NPT; End plug (suffix Y):EPR 15; Adapter sleeve assembly:SNW 126x4.3/8; RG:1/2 NPT; Cap bolt:2 x 1-8 UNC; Ca:89.789 mm; L:466.725 mm; Housing:SAW 526; H:295.275 mm; A1:133.35 mm; |
Slewing Bearing PC650 For Excavator | Basic dynamic load rating C:66.3 kN; L:197 mm; s1:46.3 mm; A:65 mm; A1:19 mm; SWN:11.113 mm; DN:6.579 mm; Mass bearing unit:6.65 kg; Housing material:Cast iron; Recommended diameter for attachment bolts, inch G:0.75 in; |
XU120179 Cross Roller Bearings,XU120179 Bearings SIZE 124.5x234x35mm | Basic Static Radial Load Rating Co:28500 N; B:46.00 mm; d:60.000 mm; Oil Speed Rating n2:5300 rpm; Grease Speed Rating n1:4500 rpm; Basic Dynamic Radial Load Rating C:87100 N; Fillet Radius ra:2.00 mm; D:130.0000 mm; |
RA15008 RA15008UUC0 High Precision Cross Roller Bearing | D:15.9000 mm; Grease Speed Rating Open/Shielded n1:44000 rpm; Basic Dynamic Radial Load Rating C:1480 N; Accessories:One Seal; Basic Static Radial Load Rating Co:620 N; Fillet Radius ra:0.30 mm; Shielded or Sealed B1:5.0 mm; Width Plain B:5.0 mm; Oil Speed Rating Open/Shielded n2:54000 rpm; Sealed Speed Rating n3:31000 rpm; |
D7964 Bearing 320x550x85mm | Adapter sleeve assembly:SNW 3038x6.7/8; J min.:441.325 mm; End plug (suffix Y):EPR 21; Eye bolt:2 x 3/8-16 UNC; H1:169.875 mm; PG:1/4 NPT; A2:288.925 mm; J1:95.25 mm; Cap bolt, SAE grade:8; Max. speed for Taconite seal:440 r/min; |
9O-2B25-0410-0974 Four Point Contact Ball Slewing Ring | G3:9 mm; A:4 mm; B1:264 mm; Hydraulic nut:HMV 76E; G2:M 6; B5:77 mm; d3:490 mm; Locking device:MS 3176; Mass adapter sleeve assembly:58 kg; B:60 mm; |
CSG(CSF)-14 Cross Roller Bearing, Harmonic Drive Bearing, Harmonic Reducer Bearing, Robot Bearing | Static (Cor):108.000 kN; Dynamic (Cr):110.379 kN; ra:2 max; da:65 min; Pu:4.909 kN; Da:110 max; Bearing designation:3311 ; D:120 mm; B:49.2 mm; d:55 mm; |
RE22025 Cross Roller Bearing 220x280x25mm | Coefficient of friction µ min.:0.03; Mass bushing:0.52 kg; d:90 mm; Permissible sliding velocity v min.:0 m/s; B:120 mm; Coefficient of friction µ max.:0.08; Specific static load factor K0:200 N/mm²; Specific dynamic load factor K:140 N/mm²; D:105 mm; Effective load carrying cross section A:10620 mm²; |
RB3010UUCC0 High Precision Cross Roller Ring Bearing Video