| 206-25-00301 Swing Bearing For Komatsu PC240LC-8K Excavator | D:230.0000 mm; Grease Speed Rating n1:2000 rpm; Fillet Radius rb:1.00 mm; Basic Dynamic Radial Load Rating C:319000 N; Oil Speed Rating n2:2600 rpm; d:130.000 mm; B:80.00 mm; Basic Static Radial Load Rating Co:415000 N; Fillet Radius ra:2.50 mm; |
| 281.30.1175.013 Four Contact Ball Slewing Ring 1007x1298x90mm | R2:37.306 mm; P120°:85.9 kN; S:4.763 mm; RG:3/4 NPT; Appropriate attachment bolt size G:1 in; ba:86.519 mm; H1:179.375 mm; A1:171.45 mm; Cap bolt:4 x 3/4-10 UNC; J max.:549.275 mm; |
| XSU140944 Cross Roller Bearing 874x1014x56mm | Basic dynamic load rating C:311 kN; J min.:304.8 mm; Limiting speed:2200 r/min; A:114.3 mm; H1:107.95 mm; J max.:333.375 mm; s:41.275 mm; L:387.35 mm; Mass bearing unit:22.5 kg; B:116.681 mm; |
| Cross Roller Bearing XR889059 Thrust Tapered Roller Bearing 1028.7x1327.15x 95.25mm | B:68.00 mm; Fillet Radius rb:1.00 mm; d:160.000 mm; Fillet Radius ra:3.00 mm; Basic Dynamic Radial Load Rating C:423000 N; Oil Speed Rating n2:2200 rpm; Grease Speed Rating n1:1800 rpm; D:340.0000 mm; Basic Static Radial Load Rating Co:530000 N; |
| CRBE 03515 A Cross Roller Bearing 35x95x15mm | Lock nut:AN 16; Hydraulic nut:HMVC 16E; B4:16.916 mm; Mass adapter sleeve assembly:1.1 kg; d:80 mm; B:15.342 mm; Sleeve:S 16x2.3/4; Threads per inch:12; d1:69.85 mm; G:79.68 mm; |
| CRB15030UUT1 High Precision Cross Roller Ring Bearing | da min.:371 mm; r3,4 min.:1.1 mm; D1 ≈:414.5 mm; Calculation factor Y2:1.41; Calculation factor Y0:0.38; Fatigue load limit Pu:9 kN; Calculation factor Y1:0.92; d:360 mm; Limiting speed:1500 r/min; Reference speed:1500 r/min; |
| RU42UUCC0 Crossed Roller Bearing 20x70x12mm | Basic Dynamic Radial Load Rating 40º C1:199000 N; D:190.0000 mm; Oil Speed Rating n2:4000 rpm; B:86.00 mm; Grease Speed Rating n1:3000 rpm; Basic Static Radial Load Rating 15º Co1:204000 N; d:90.000 mm; Width Plain C2:186000 N; Fillet Radius rb:1.00 mm; Shielded or Sealed Co2:160000 N; |
| Slewing Bearing For Komatsu PC300-7 Excavator | A2:379.413 mm; Mass pillow block:316 kg; Da:419.999 mm; Cap bolt recommended tightening torque:4284.4 N·m; J1:139.7 mm; RG:1 NPT; H:495.3 mm; J min.:666.75 mm; Eye bolt:2 x 1/2-13 UNC; Initial grease fill:3515.4 g; |
| CRBH4010 Cross Roller Bearing 40x65x10mm | Pu:1020 kN; with cylindrical bore:790 min-1; rs (min):3 mm; Dynamic (Cr):7.5 mm; Static (Cor):13.9 mm; Grease:1850 kN; B:90 mm; with tapered bore:940 min-1; Oil:165.660 kN; d:220 mm; |
| 121.32.1250 Slewing Bearing | Outside Diameter D2:47 mm; Dimension D3:28.20 mm; Weight W:0.14 kg; Outher Width C:14 mm; Set Screw Size SSS:M6*0.75*5; Basic Static Radial Load Rating Co:6550 N; Inner Width B:31.0 mm; Dimension S:12.7 mm; Bore Diameter D:20 mm; Basic Dynamic Radial Load Rating:10600 N; |