| No. | Brand | C | K | A | T | a | G | h | b |
| DH55 | INA | - | - | - | - | - | M 36x3 | 130 mm | - |
| 3 | - | - | - | - | - | - | - | - | - |
| 1010 | - | - | - | - | - | - | - | - | - |
| 12'x28'x8' | - | - | - | - | - | - | - | 31.75 mm | - |
| 6213 | NSK | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 29520 | Timken | - | - | - | - | - | - | - | - |
| 35789-30020 | - | - | - | - | - | - | - | - | - |
| JS220 | - | - | - | - | - | - | - | - | - |
| 3-NSK-bearing | NSK | - | - | - | - | - | - | - | - |
| XS1100 | - | - | - | - | - | - | - | 63.5 mm | - |
| 80x170x58 | - | - | - | - | - | - | - | - | - |
| 510084 | Timken | - | - | - | - | - | - | - | - |
| 7315 | - | - | - | - | - | - | - | - | - |
| 900 | NTN | - | - | - | - | - | - | 51.594 mm | - |
| 212140106001 | - | 46 mm | - | - | - | - | - | - | - |
| 38KTD | RBC | 13 mm | - | - | 16.25 mm | 12 mm | - | - | - |
| PC200 | - | - | - | - | - | - | - | - | - |
| EMC0512 | - | - | - | - | 22 mm | - | - | - | - |
| WA380-6 | - | - | - | - | - | - | - | - | - |
| GB-2414 | koyo | - | 4.5 mm | - | - | - | - | - | - |
| 61815 | - | - | - | - | - | - | - | - | - |
| A8-39E12 Four Point Contact Ball Slewing Bearing With External Gear | Calculation factor Y2:0.81; Calculation factor Y1:0.47; Basic static load rating C0:4250 kN; da min.:496 mm; a:645 mm; Calculation factor A:104; Fatigue load limit Pu:69.5 kN; Mass bearing:415 kg; Calculation factor Y0:0.44; d:460 mm; |
| NRXT7013DD Crossed Roller Bearing 70x100x13mm | Dimension H2:0.7500 in; Dimension A1:1.2500 in; Width A:1.8750 in; Distance JMIN:4.9375 in; Basic Static Radial Load Rating Co:4270 lbf; Shaft Diameter D:1 1/2 in; Basic Dynamic Radial Load Rating:5550 lbf; Height H:3.9063 in; Distance JMAX:5.7500 in; Dimension L:6.8750 in; |
| E.505.20.00.B Four-point Contact Ball Slewing Ring | Design variant/feature:TQOSN/GWISI; Calculation factor Y1:1.8; r1,2 min.:3.3 mm; D1 ≈:818 mm; Fatigue load limit Pu:1400 kN; r3,4 min.:6.4 mm; Calculation factor Y0:1.8; Mass bearing:505 kg; D:876.3 mm; d:685.8 mm; |
| I.505.20.00.C Four Contact Ball Slewing Ring 327x518x56mm | Housing washer:GS 81218; Eb:129 mm; Shaft washer:WS 81218; Mass roller and cage thrust assembly:0.54 kg; Fatigue load limit Pu:90 kN; d:90 mm; D:135 mm; Basic dynamic load rating C:232 kN; Basic static load rating C0:865 kN; Limiting speed:2000 r/min; |
| CRBF108AT.UU High Precision Crossed Roller Bearing | Grease Speed Rating Open/Shielded n1:4300 rpm; D:150.0000 mm; d:85.000 mm; Grease Speed Rating n1:4300 rpm; Sealed Speed Rating n3:2800 rpm; Oil Speed Rating Open/Shielded n2:5000 rpm; B:28.00 mm; Accessories:Snap-Ring; Fillet Radius ra:2.00 mm; Oil Speed Rating n2:5000 rpm; |
| 232.20.1000.013 Four Contact Ball Slewing Ring 986x1198x56mm | Mass withdrawal sleeve:265 kg; G1:50 mm; d:850 mm; Hydraulic nut:HMV 180 E; d1:800 mm; B1:415 mm; G2:G 1/4; B2:445 mm; Nut for removal:HM 31/900; G:Tr 900x7; |
| 021.30.1000 Slewing Bearing | Pu:0.172 kN; rs (min):0.6 mm; Oil:26 000 min-1; d:12 mm; D:32 mm; Dynamic (Cr):8.035 kN; Grease:19 000 min-1; r1s (min):0.3 mm; B:10 mm; Static (Cor):3.778 kN; |
| RB50040 Cross Roller Bearings 500*600*40mm | Basic Static Radial Load Rating Co:3250 N; Oil Speed Rating Open/Shielded n2:24000 rpm; Grease Speed Rating Open/Shielded n1:19000 rpm; B:10.00 mm; d:17.000 mm; Accessories:Shield & Seal; D:35.0000 mm; Basic Dynamic Radial Load Rating C:6050 N; Sealed Speed Rating n3:13000 rpm; Fillet Radius ra:0.30 mm; |
| 797/845G2 Slewing Bearing | Mass bearing:1.66 kg; d1 ≈:77.5 mm; da min.:65 mm; Limiting speed:7000 r/min; s max.:2 mm; Basic static load rating C0:143 kN; Reference speed:6000 r/min; Da max.:111 mm; Limiting value e:0.2; da max.:104 mm; |
| 40 mm x 75 mm x 37 mm 012.60.2500 Slewing Bearing | Locking device:MS 31/800-750; Hydraulic nut:HMV 160E; B:112 mm; Mass adapter sleeve assembly:520 kg; G2:G 1/8; d3:1000 mm; G:Tr 800x7; B5:141 mm; G3:13 mm; B1:505 mm; Size (mm):40 mm x 75 mm x 37 mm ; |
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
RB26035UUCC0 High Precision Cross Roller Ring Bearing Video