| No. | Brand | C | K | A | T | a | G | h | b |
| FC20 | - | - | - | - | - | - | - | - | - |
| NNCL4972 | - | - | - | - | - | - | - | - | - |
| 9mm/11mm/15mm/18mm | - | - | - | - | - | - | - | - | - |
| v70 | - | - | - | - | - | - | - | - | - |
| 8x16x5 | - | - | - | - | - | 53 mm | - | - | - |
| 3 | - | - | - | 76.2 mm | - | - | - | - | - |
| 1140 | - | - | - | - | - | - | - | - | - |
| 20pcs | - | - | - | - | - | - | - | - | - |
| NK17/20 | SKF | - | - | - | - | - | - | - | - |
| SY100, | SKF | - | - | - | - | - | - | - | - |
| 100% | - | - | - | - | - | - | - | - | - |
| 26ml | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 99.5% | INA | - | - | - | - | - | - | - | - |
| TM40 | INA | - | - | - | - | - | - | - | - |
| 5~6 | - | - | - | - | - | - | - | - | - |
| 22332 | - | - | - | - | 38 mm | - | - | - | - |
| C0605 | - | 37 mm | - | - | - | 38.407 mm | - | - | - |
| 90% | - | - | - | - | - | - | - | - | - |
| 2020 | - | - | - | - | - | - | - | - | - |
| 10pcs | - | - | - | - | - | - | - | - | - |
| 180W | - | - | - | - | - | - | - | - | - |
| 1220*2440*1mm | - | - | - | - | - | - | - | - | - |
| 344/332 | NTN | - | - | - | - | - | - | - | - |
| CBX750 | - | - | - | - | - | - | Tr 260x4 | - | - |
| Pvm016 | Parker | - | - | - | - | - | - | - | - |
| 6004-2RSH | SKF | - | - | - | - | - | - | - | - |
| 50kg | - | - | - | - | 405 mm | - | - | - | - |
| Slewing Ring For Excavator HITACHI EX300-5, Part Number:9166468 | P60°:535 kN; h:60.325 mm; P90°:320 kN; PG:1/4 NPT; Initial grease fill:1304.1 g; A1:180.975 mm; Bearing:22236 CCK/W33; Eye bolt:2 x 3/8-16 UNC; da:163.512 mm; Bearing limiting speed:2600 r/min; |
| XR903054 Cross Tapered Roller Bearing 1879.6x2197.1x101.6mm | Mass bearing:0.39 kg; Basic dynamic load rating C:64 kN; d1 ≈:38.1 mm; Limiting value e:0.3; Fatigue load limit Pu:6.95 kN; F:34 mm; Angle ring:HJ 2305 EC; da min.:31 mm; Basic static load rating C0:55 kN; db min.:40 mm; |
| Komatsu PC128 Excavator Slewing Bearing | Dimension H1:1.3125 in; Dimension F:0.5000 in; Basic Dynamic Radial Load Rating:2860 lbf; Dimension S1:0.7188 in; Shaft Diameter D:3/4 in; Dimension L:3.0000 in; Thread Diameter G:3/8-16; Width A:1.4375 in; Weight W:0.51 lb; Insert Bearing IB:ZMaRC; |
| CRBC 15025 Crossed Roller Bearings 150x210x25mm Industrial Robots Arm Use | da:104.775 mm; H1:133.35 mm; A2:254 mm; Taconite seal:TER 112; J1:69.85 mm; J min.:336.55 mm; Cap bolt recommended tightening torque:400 N·m; P120°:72.5 kN; H:257.175 mm; P90°:111 kN; |
| RB20025UU High Precision Cross Roller Ring Bearing | Grease Speed Rating n1:6800 rpm; Fillet Radius ra:1.00 mm; Oil Speed Rating n2:8000 rpm; B:36.00 mm; Basic Dynamic Radial Load Rating C:55900 N; Fillet Radius rb:0.60 mm; Basic Static Radial Load Rating Co:50000 N; d:40.000 mm; D:80.0000 mm; |
| 9129521 Swing Bearing For HITACHI EX450LC-5 Excavator | D:160.0000 mm; Fillet Radius ra:2.00 mm; Oil Speed Rating n2:3400 rpm; d:90.000 mm; Sealed Speed Rating n3:2400 rpm; B:52.40 mm; Grease Speed Rating n1:2400 rpm; Accessories:One Shield & Snap-Ri; Basic Dynamic Radial Load Rating C:151000 N; Basic Static Radial Load Rating Co:193000 N; |
| M4-38P4 Angular Contact Ball Slewing Rings | B:88.9 mm; Pu:123.000 kN; F:182 mm; r1s (min):2.3 mm; Static (Coa):1260 kN; rs (min):2.3 mm; Dynamic (Ca):736 kN; s:10 mm; d2:150 mm; b1:mm; |
| VSA250755N Slewing Bearings (655x898x80mm) Turntable Bearing | K:5 mm; r1,2 min.:4 mm; das:291 mm; Mass bearing:85.5 kg; d1 ≈:302.8 mm; b1:9.4 mm; ra max.:3 mm; da min.:278 mm; Basic dynamic load rating C:2860 kN; D1 ≈:361.7 mm; |
| Produce CRB15030 Crossed Roller Bearing，CRB15030 Bearing Size150X230x30mm | B:46.00 mm; Basic Dynamic Radial Load Rating C:234000 N; Fillet Radius rb:1.00 mm; Fillet Radius ra:2.00 mm; D:280.0000 mm; Basic Static Radial Load Rating Co:290000 N; d:180.000 mm; Grease Speed Rating n1:2000 rpm; Oil Speed Rating n2:2600 rpm; |
| 2.953 Inch | 75 Millimeter x 4.528 Inch | 115 Millimeter x 2.126 Inch | 54 Millimeter CRBB09016 Cross Roller Bearing (90x130x16mm) Rotary Table Bearing | ba max.:170 mm; P120°:2200 kN; Lock nut:HM 56 T; db:300 mm; A1:310 mm; Locating ring:2 x FRB 10/500; ba min.:134 mm; P150°:1900 kN; P90°:2900 kN; da:280 mm; Size (mm):2.953 Inch | 75 Millimeter x 4.528 Inch | 115 Millimeter x 2.126 Inch | 54 Millimeter ; |
RB40035UUCC0 High Precision Cross Roller Ring Bearing Video