| No. | Brand | C | K | A | T | a | G | h | b |
| T6C | - | - | 12 mm | - | - | - | - | - | - |
| PC1250-7 | INA | - | - | - | - | - | - | - | - |
| 6304 | koyo | - | - | - | - | - | - | - | - |
| SY416 | - | - | - | - | - | - | - | - | - |
| MF126ZZ | NSK | - | 12 mm | - | - | - | - | - | - |
| NKX30 | SKF | - | - | - | - | - | - | - | - |
| 4 | SKF | - | - | - | - | - | - | - | - |
| 50% | - | - | 9 mm | - | - | - | - | - | - |
| 4X8 | INA | - | - | - | - | - | - | - | - |
| 23126 | NSK | - | - | - | - | - | - | - | - |
| A6VE28 | Rexroth | - | - | - | 84 mm | - | - | - | 4.5 mm |
| 1220*2440*(9-18mm) | - | - | - | - | - | - | - | - | - |
| 81106-TV | INA | - | - | - | - | - | - | - | - |
| 23988-MB-T52BW | fag | 18.824 mm | - | - | - | - | - | - | - |
| 5X | - | - | - | - | - | - | - | - | - |
| 6203 | - | - | - | - | - | - | - | - | - |
| 12 | - | - | - | - | - | - | - | 195 mm | - |
| 11mm | - | - | 12 mm | - | - | - | - | - | - |
| 1mm | - | - | - | - | - | - | - | - | - |
| 4-28x50 | - | - | - | - | - | - | - | - | - |
| SE9 | - | - | - | - | - | - | - | - | - |
| 18mm | INA | - | - | - | - | - | - | 40.922 mm | - |
| 18mm | - | - | - | - | - | - | - | - | 9 mm |
| 155 | Nachi | - | - | - | - | - | - | - | - |
| RKS.21 0941 Light Series Four-point Contact Ball Slewing Bearing With External Gear | Roller and cage thrust assembly:K 89434 M; D:340 mm; r1,2 min.:5 mm; B:34.5 mm; Fatigue load limit Pu:600 kN; H:103 mm; ra max.:5 mm; Mass bearing:51.9 kg; Basic dynamic load rating C:1600 kN; Reference speed:430 r/min; |
| CRBD 16035 C Cross Roller Bearing 160x295x35mm | B:26 mm; B4:28.5 mm; Lock nut:KML 34; Locking device:MBL 34; Hydraulic nut:HMV 34 E; d1:152.4 mm; d:170 mm; G:M 170x3; d3:200 mm; Mass adapter sleeve assembly:5.4 kg; |
| Slewing Ring For Excavator HITACHI EX300-3, Part Number:9112188 | r1,2 min.:3 mm; ra max.:3 mm; Da max.:328 mm; H:95 mm; Limiting speed:630 r/min; d:300 mm; Shaft washer:WS 81260; Basic dynamic load rating C:1530 kN; Mass bearing:43 kg; Basic static load rating C0:7200 kN; |
| MTE-415T Turntable Bearing | Oil Speed Rating Open/Shielded n2:1600 rpm; Basic Dynamic Radial Load Rating C:270000 N; Basic Static Radial Load Rating Co:375000 N; Sealed Speed Rating n3:800 rpm; Accessories:One Shield; Grease Speed Rating Open/Shielded n1:1300 rpm; d:300.000 mm; Fillet Radius ra:3.00 mm; B:56.00 mm; D:420.0000 mm; |
| 282.30.1375.013 Four Contact Ball Slewing Ring 1212x1498x90mm | Minimum load factor A:910; H:140 mm; Reference speed:260 r/min; Fatigue load limit Pu:150 kN; Basic static load rating C0:13200 kN; Mass bearing (including seat washer where applicable):275 kg; D:1180 mm; d:1000 mm; ra max.:4 mm; da min.:1106 mm; |
| XSI140944N Crossed Roller Slewing Ring Slewing Bearing | d3 max.:155.702 mm; Sleeve:S 124x4.3/16; d1:106.362 mm; B1:117.805 mm; Mass adapter sleeve assembly:3.55 kg; d:120 mm; Lock nut:AN 24; G:119.786 mm; B:20.904 mm; Threads per inch:12; |
| XSA140744-N Cross Roller Bearing Manufacturer 674x838.1x56mm | d:950 mm; Mass bearing:250 kg; D1:956 mm; ra max.:4 mm; B:40.5 mm; D:1120 mm; r1,2 min.:5 mm; Da max.:981 mm; Basic dynamic load rating C:4400 kN; d1:1114 mm; |
| 2788/850K Slewing Bearing | C:17 mm; r2s (min):0.6 mm; a:29 mm; B:23 mm; Dynamic (Ca):76.4 kN; T:25.25 mm; Pu:10.460 kN; Static (Coa):85.8 kN; rs (min):2 mm; d2:40 mm; |
| VSU 200744 Four Point Contact Slewing Ring | Cap bolt:1 1/2-6 UNC; P120°:260 kN; H2:95.25 mm; H1:241.3 mm; ba:90.487 mm; Cap bolt recommended tightening torque:4284.4 N·m; Initial grease fill:2749.95 g; Mass pillow block:365 kg; P180°:285 kN; da:190.5 mm; |
| HS6-29E1Z External Gear Bearing | Fatigue load limit Pu:204 kN; Limiting speed:1900 r/min; K:9 mm; Calculation factor Y2:3.3; Calculation factor e:0.31; d1:180 mm; b:16.7 mm; d3:250 mm; d2 ≈:231 mm; r1,2 min.:3 mm; |
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
CRB9016UUT1 High Precision Cross Roller Ring Bearing Video