No. | Brand | C | K | A | T | a | G | h | b |
10,000 | - | - | - | - | - | - | - | - | - |
140mm | - | - | - | - | - | - | - | - | - |
9 | - | - | - | - | - | - | - | - | - |
1680ml | - | - | - | - | - | - | - | - | - |
4 | - | - | - | - | - | - | - | - | - |
10inch | - | - | - | - | - | - | - | - | - |
T30 | Bower | - | - | - | - | - | - | - | - |
6303Y/C172 | SKF | - | - | - | - | - | - | - | - |
ZK04 | - | - | - | - | - | - | - | - | - |
6076 | - | - | - | - | - | - | - | - | - |
600 | - | - | - | - | - | - | - | - | - |
1972-1974 | Timken | - | - | - | - | - | - | - | - |
GB-2414 | koyo | - | 4.5 mm | - | - | - | - | - | - |
9mm/ | - | - | - | - | - | - | - | - | - |
Mk4 | - | - | - | - | - | - | - | - | - |
A10Vso | Rexroth | - | - | - | - | - | - | - | - |
Rhb303V | - | - | - | - | - | - | - | - | - |
99.5% | - | - | - | - | - | - | - | - | - |
3318-C3 | fag | - | - | - | 41.275 mm | - | - | - | - |
5x8x2.5 | - | - | - | - | - | - | - | - | - |
3 | - | - | - | - | - | - | M 42x3 | 145 mm | - |
(1220X2440mm) | - | - | - | - | - | - | - | - | - |
21% | - | - | - | - | - | - | - | - | - |
D5792/900 Slewing Bearing | Grease Speed Rating Open/Shielded n1:12000 rpm; D:55.0000 mm; Basic Dynamic Radial Load Rating C:13300 N; B:13.00 mm; Basic Static Radial Load Rating Co:8300 N; Oil Speed Rating Open/Shielded n2:15000 rpm; Sealed Speed Rating n3:8000 rpm; d:30.000 mm; Fillet Radius ra:1.00 mm; Accessories:One Shield; |
E11768/630 Bearing 630x780x69mm | Tolerance housing:H7; h:17 mm; Tolerance shaft:e7; Permissible sliding velocity v max.:0.5 m/s; D:22 mm; Specific static load factor K0:45 N/mm²; B:16 mm; Mass bushing:0.034 kg; D1:28 mm; Specific dynamic load factor K:25 N/mm²; |
RE25030 Cross Roller Bearings,RE25030 Bearings SIZE 250x330x30mm | Basic static load rating C0:2120 kN; D:620 mm; Calculation factor e:0.2; Reference speed:380 r/min; Da max.:607 mm; Basic dynamic load rating C:952 kN; Limiting speed:480 r/min; ra max.:2.5 mm; B:56 mm; Calculation factor kr:0.1; |
SX011848 Cross Roller Bearing 240x300x28mm | Da:170 mm; Pa:9.43 kN; Initial grease fill:365.71 g; Max. speed for Taconite seal:1150 r/min; R2:26.988 mm; R1:63.5 mm; J min.:269.875 mm; PG:1/8 NPT; A2:233.363 mm; H:209.55 mm; |
XSI141094-N Cross Roller Bearing Manufacturer 984x1164x56mm | r1,2 min.:3 mm; da min.:543 mm; Calculation factor Y:0.4; d1 ≈:572 mm; das:566 mm; Calculation factor e:0.3; E:624.5 mm; ra max.:2.5 mm; d:530 mm; Mass bearing:49.3 kg; |
010.30.710 Slewing Bearing | d:200 mm; with tapered bore:2 000 min-1; Oil:108.790 kN; Static (Cor):8.3 mm; with cylindrical bore:1 600 min-1; Pu:650 kN; Grease:1160 kN; Dynamic (Cr):4.5 mm; D:280 mm; rs (min):2.1 mm; |
Produce CRB7013 Crossed Roller Bearing,CRB7013 Bearing Size70X100x13mm | Q120°:2860 kN; J6:770 mm; Initial grease fill, 20%:4.1 kg; bb:115.5 mm; H:591 mm; A1:310 mm; N:50 mm; P0°:4800 kN; L:830 mm; Cap bolt, rec. tightening torque:400 N·m; |
Slewing Bearing For Komatsu PC360 Excavator | P150°:136 kN; Labyrinth ring:2 x LOR 156; P120°:151 kN; J max.:619.125 mm; End plug (suffix Y):EPR 21; P180°:160 kN; Cap bolt recommended tightening torque:1735.4 N·m; Initial grease fill:1672.65 g; Ca:101.803 mm; H2:79.375 mm; |
124.28.800 Slewing Bearing | Basic dynamic load rating C:3.71 kN; Mass bearing:0.017 kg; Limiting speed:28000 r/min; D2 ≈:25.3 mm; Calculation factor kr:0.025; Calculation factor f0:14.3; Fatigue load limit Pu:0.095 kN; D3:30.5 mm; d1 ≈:18.8 mm; Basic static load rating C0:2.24 kN; |
XD.10.0902P5 Cross Tapered Roller Bearing 901.7x1117.6x82.555mm | Basic Radial Load Rating-Static SCO:5130 N; Inside Diameter D:36.5125 mm; Variant:SZZX Two Seals; Basic Radial Load Rating-Dynamic DC:8180 N; Speed Rating-Single and Double Sealed Grease SDG:5000 rpm; Fillet Radius ra:1.00 mm; B:19.00 mm; Adapter Sleeve AS:SNW9; D:85.0000 mm; |
CRB15025UUT1 High Precision Cross Roller Ring Bearing Video