| No. | Brand | C | K | A | T | a | G | h | b |
| YC35-6 | Nachi | - | - | - | - | - | - | 295 mm | - |
| 35X47X7 | Timken | - | - | - | - | - | - | - | - |
| 7783-20-2 | - | - | - | - | - | - | - | - | - |
| 2 | - | - | 3 mm | - | - | - | - | - | - |
| 1972-1975 | Timken | - | - | - | - | - | - | - | - |
| 7803-63-6 | - | - | - | - | - | - | - | - | - |
| sl192338-tbr | INA | - | - | - | - | - | - | - | - |
| EX200 | Hitachi | - | - | - | - | - | - | - | mm |
| 3BJ-60211-0 | - | - | - | - | - | 16.111 mm | - | - | - |
| N+P2O5+K2O | - | - | - | - | - | - | - | - | - |
| (12X16X10) | - | - | - | - | - | - | - | - | - |
| 09263-15043-000 | - | - | - | - | - | - | - | - | - |
| 19-9-19 | - | - | - | - | - | - | - | - | - |
| 3mm | - | - | - | - | - | - | - | - | - |
| 12mm | - | - | - | - | - | - | - | - | - |
| KMX32 | INA | - | - | - | - | - | - | - | - |
| 5cm-8cm | - | - | - | - | - | - | - | - | - |
| 2207-K-TVH-C3 | fag | - | - | - | - | - | - | - | - |
| 0811404752 | Rexroth | - | - | - | - | - | - | - | - |
| 60% | - | - | - | - | - | - | - | - | - |
| K1006550C | - | 43 mm | - | - | - | 44.387 mm | - | - | - |
| 91-32 1355/1-06155 Four-point Contact Ball Slewing Bearing With External Gear | d1:1110 mm; Basic static load rating C0:45500 kN; Minimum axial load factor A:170; Da max.:895 mm; Mass bearing:580 kg; r1,2 min.:7.5 mm; ra max.:6 mm; Limiting speed:220 r/min; D:1120 mm; da min.:1075 mm; |
| China Wind Power Slewing Bearing 013.50.2980.03 Wind Turbine Slewing Bearing | Fatigue load limit Pu:23.6 kN; Limiting speed:5600 r/min; Da max.:100.5 mm; Calculation factor Y:1.8; Dimension series:39500; B:30.162 mm; a:23.379 mm; rb max.:3.3 mm; r1,2 min.:3.5 mm; r3,4 min.:3.3 mm; |
| 013.40.1120.12 Bearing 944x1242x100mm | RG:1 NPT; Bearing:22238 CCK/W33; Cap bolt recommended tightening torque:1735.4 N·m; End plug (suffix Y):EPR 21; da:173.037 mm; Cap bolt:1 1/8-7 UNC; P120°:151 kN; Housing:SSAFS 538; ba:78.581 mm; Eye bolt:2 x 1/2-13 UNC; |
| 012.60.2240.12 Bearing 2065x2498x144mm | d1:230 mm; r1,2 min.:3 mm; d:110 mm; Mass shaft washer:6.12 kg; B:24.5 mm; |
| 280.30.1200.013 Four Contact Ball Slewing Ring 1105x1400x90mm | d1:43 mm; h:2 mm; d3:45 mm; G:M 25x1.5; Grub (set) / Locking screw size:M 4; d5:44 mm; b:5 mm; Mass:0.14 kg; Associated spanner (Hook spanner in accordance with DIN 1810):HN 5-6; B:20 mm; |
| HS6-37N1Z Internal Gear Slewing Bearing | Fillet Radius ra:2.50 mm; Accessories:Two Seals; Oil Speed Rating Open/Shielded n2:4300 rpm; Grease Speed Rating n1:3600 rpm; Sealed Speed Rating n3:2400 rpm; Basic Dynamic Radial Load Rating C:133000 N; Grease Speed Rating Open/Shielded n1:3600 rpm; B:41.00 mm; Basic Static Radial Load Rating Co:96500 N; Oil Speed Rating n2:4300 rpm; |
| EX300-2 Slewing Bearing | B1:335 mm; Weight:1300 ; Pu:1579.250 kg; D:1090 mm; B:475 mm; Dynamic (Cr):10149 kN; Static (Cor):25200 ; d:750 mm; Bearing designation:PLC 512-56 ; |
| 012.45.1600.12K Bearing 1460x1808x110mm | D:120 mm; Mass bearing:1.04 kg; Reference speed:4000 r/min; d:90 mm; Limiting speed:4800 r/min; db:99.3 mm; Db:101 mm; Basic dynamic load rating C:67.1 kN; Basic static load rating C0:190 kN; s max.:1 mm; |
| Slewing Ring For Excavator KOBELCO SK350-8, Part Number:LC40F00018F1 | Q150°:2400 kN; Cap bolt, size:M 36x240; Locating ring:2 x FRB 10/620; Mass housing:470 kg; H:715 mm; N4 max.:30 mm; Oil level, max.:110 mm; Bearing (basic designation):C 3176 K; Oil seal:2 x TSD 3176 U; Q120°:4200 kN; |
| Slewing Ring For Excavator HITACHI EX200-5, Part Number:9102727 | d:80.000 mm; Oil Speed Rating n2:5300 rpm; Basic Dynamic Radial Load Rating C:39700 N; D:140.0000 mm; Fillet Radius ra:2.00 mm; B:26.00 mm; Grease Speed Rating n1:4500 rpm; Basic Static Radial Load Rating Co:17000 N; |
CRB50040UU High Precision Cross Roller Ring Bearing Video