| MTO-265 Heavy Duty Slewing Ring Bearing | Labyrinth ring:2 x LOR 139; P180°:145 kN; Da:359.999 mm; R2:42.862 mm; PG:1/4 NPT; Pa:60.9 kN; Adapter sleeve assembly:SNW 134x5.7/8; Eye bolt:2 x 1/2-13 UNC; Cap bolt:4 x 7/8-9 UNC; Initial grease fill:2154.6 g; |
| 797/1200 Slewing Bearing | Nut for removal:HM 31/800; Hydraulic nut:HMV 160 E; d:750 mm; G:Tr 800x7; B2:556 mm; G1:65 mm; A:15 mm; B1:540 mm; d1:710 mm; Mass withdrawal sleeve:320 kg; |
| 206-25-67102 Swing Bearing For Komatsu PC250LC-6L Excavator | Limiting speed:800 r/min; Da max.:203 mm; Basic static load rating C0:8000 kN; ra max.:5 mm; d:180 mm; D:360 mm; B:36.5 mm; D1:184 mm; H:109 mm; Mass bearing:60.2 kg; |
| 9E-1B20-0307-0733 Four Point Contact Ball Slewing Ring | Basic Radial Load Rating-Dynamic DC:14000 N; Width - Outer Ring B0:15.0 mm; Fillet Radius ra:1.00 mm; D:52.0000 mm; d:25.000 mm; Basic Interchange NDH:488505; Basic Interchange BCA:-; Basic Radial Load Rating-Static SCO:8000 N; Basic Interchange FAF:-; Speed Rating-Single and Double Sealed Grease SDG:8500 rpm; |
| RB25040UU High Precision Cross Roller Ring Bearing | Lock nut:AN 32; H1:169.875 mm; ba:82.55 mm; Appropriate attachment bolt size G:1 in; Housing:SAW 232; db:177.8 mm; h:52.388 mm; A1:158.75 mm; J max.:488.95 mm; PG:1/4 NPT; |
| 6397/2910G Slewing Bearing | P60°:691 kN; A2:311.15 mm; Labyrinth ring:2 x LOR 166; J1:133.35 mm; S:4.763 mm; H1:241.3 mm; Initial grease fill:2749.95 g; PG:1/4 NPT; Cap bolt recommended tightening torque:4284.4 N·m; Ca:117.805 mm; |
| RE35020 Cross Roller Bearing 350x400x20mm | Fillet Radius ra:2.00 mm; Grease Speed Rating Open/Shielded n1:6000 rpm; Oil Speed Rating Open/Shielded n2:7000 rpm; B:29.00 mm; Sealed Speed Rating n3:4000 rpm; d:45.000 mm; Basic Dynamic Radial Load Rating C:76100 N; D:120.0000 mm; Basic Static Radial Load Rating Co:45000 N; Accessories:Shield & Seal; |
| 792/1000G2K Bearing 1000x1270x100mm | d1:152.4 mm; B1:122.86 mm; B4:30.963 mm; Hydraulic nut:HMVC 34E; d3 max.:219.989 mm; Mass adapter sleeve assembly:8.85 kg; Lock nut:AN 34; Lock washer:W 34; B:27.254 mm; G:169.139 mm; |
| 9E-1B32-1086-0530 Four Point Contact Ball Slewing Ring | r3,4 min.:2.5 mm; D:110 mm; db min.:77.5 mm; Ca min.:5 mm; d:65 mm; C:22.5 mm; rb max.:2.5 mm; Fatigue load limit Pu:21.2 kN; Cb min.:5.5 mm; Calculation factor Y0:0.8; |
| CRBB03010 Cross Roller Ring (30x55x10mm) Robots Ring | d:1.500 in; Basic Static Radial Load Rating Co:17000 N; Fillet Radius ra:0.04 in; Basic Dynamic Radial Load Rating C:23800 N; D:2.6875 in; Grease Speed Rating n1:9800 rpm; B:0.5625 in; Oil Speed Rating n2:36000 rpm; Fillet Radius rb:0.024 in; |