| No. | Brand | C | K | A | T | a | G | h | b |
| 850 | - | - | - | - | - | - | - | - | - |
| Denison6DC, | - | - | - | - | - | - | - | - | - |
| 7803-63-6 | - | - | - | - | - | - | - | - | - |
| 9mm | - | - | - | - | - | - | - | - | - |
| NKXR35 | SKF | - | - | - | - | - | - | - | - |
| GE17 | - | - | - | - | - | - | - | - | - |
| 15x24x5 | - | - | - | - | - | - | - | - | - |
| 7835-10-5000 | - | - | - | - | - | - | - | - | - |
| 163-6703 | - | - | - | - | - | - | - | - | - |
| 18mm | INA | - | - | - | - | - | - | - | - |
| (2) | INA | - | - | - | 200 mm | - | - | - | - |
| 1000 | fag | - | - | - | - | - | - | - | - |
| 22206CK | NSK | - | - | - | - | - | - | - | - |
| 6203-2RS | - | - | - | - | - | - | - | - | - |
| NV45/50/60/64/70/80/84/90/111/120/137/150/172/210/237/270 | - | - | - | - | - | - | - | - | - |
| [10 | - | - | - | - | - | - | - | - | - |
| PHV-390-53B-1-8940A | INA | 34 mm | - | - | 43 mm | 31 mm | - | - | - |
| N207ECP | SKF | - | - | - | - | - | - | - | - |
| 5mm | - | - | - | - | - | - | Tr 480x5 | - | - |
| (JZ-T102) | - | - | - | - | - | - | - | - | - |
| 6702ZZ | - | - | - | - | - | - | 84.836 mm | - | - |
| 1700 | - | - | - | - | - | - | - | - | - |
| Set4) | - | - | - | - | - | - | - | - | - |
| 3 | - | - | - | - | - | - | - | - | - |
| VSI 201094-N Four Point Contact Slewing Ring | Taconite seal (dc shaft position):TER 106; L:387.35 mm; R2:30.163 mm; Lock nut:AN 20; db:114.3 mm; ba:52.388 mm; A2:219.075 mm; J max.:333.375 mm; J1:60.325 mm; P120°:39.1 kN; |
| RB 20035 UUCCO Crossed Roller Bearing | Weight:2.1 kg; Oil:6 000 min-1; rs:2.1 mm; Dynamic (Cr):92.600 kN; B:33 mm; Da:128 max; Static (Cor):59.600 kN; Bearing designation:6313 ; da:76 min; Pu:2.676 kN; |
| SH120C3 Slewing Bearing | P120°:85.9 kN; H:336.55 mm; P180°:94.3 kN; Lock nut:AN 32; A1:158.75 mm; Cap bolt recommended tightening torque:203.4 N·m; dc:153.988 mm; Cap bolt:4 x 3/4-10 UNC; P90°:136 kN; ba:70.644 mm; |
| XU080149 Crossed Roller Slewing Bearing | Appropriate attachment bolt size G:0.625 in; A1:79.375 mm; P90°:30.2 kN; H1:76.2 mm; Mass pillow block:10.5 kg; P150°:16 kN; P120°:17.8 kN; da:55.563 mm; Max. speed for contact seal:2600 r/min; Contact seal:2 x B9784-24; |
| 21P-25-K1100 Swing Bearing For Komatsu PC150LC-6K Excavator | B:8 mm; Specific static load factor K0:20 N/mm²; Tolerance housing:H7; d:12 mm; Specific dynamic load factor K:10 N/mm²; Tolerance shaft:h8; Mass bushing:0.011 kg; Coefficient of friction µ max.:0.1; Permissible sliding velocity v max.:5 m/s; B1:3 mm; |
| Offer Slewing Bearing For QY-20TH Crane | Basic Static Radial Load Rating Co:134000 N; Accessories:One Shield & Snap-Ri; Oil Speed Rating Open/Shielded n2:3400 rpm; Basic Dynamic Radial Load Rating C:127000 N; B:34.00 mm; d:100.000 mm; D:180.0000 mm; Fillet Radius ra:2.00 mm; Grease Speed Rating Open/Shielded n1:2800 rpm; |
| L9-42N9Z Four-point Contact Ball Slewing Rings With Internal Gear | B1:96 mm; B2:102 mm; G:M 200x3; Nut for removal:KM 40; G1:18 mm; d:190 mm; Mass withdrawal sleeve:3.28 kg; Hydraulic nut:HMV 40 E; d1:180 mm; |
| RE7013 Crossed Roller Bearings 70x100x13mm | Bearing:1315; Housing:SAF 315; J min.:263.525 mm; h:42.862 mm; Pa:32 kN; Mass pillow block:20 kg; L:349.25 mm; Cap bolt recommended tightening torque:298.3 N·m; P90°:72.5 kN; Lock washer:W 15; |
| VSU200544 Slewing Bearing 472*616*56mm | B:10.00 mm; Oil Speed Rating Open/Shielded n2:28000 rpm; Grease Speed Rating Open/Shielded n1:22000 rpm; Oil Speed Rating n2:28000 rpm; D:32.0000 mm; Grease Speed Rating n1:22000 rpm; Accessories:One Shield & Snap-Ri; Sealed Speed Rating n3:15000 rpm; Basic Static Radial Load Rating Co:3100 N; Basic Dynamic Radial Load Rating C:6890 N; |
| PC228/40 Slewing Bearing | B:31.75 mm; d:44.475 mm; Set:Duplex Set DF; Basic Static Radial Load Rating Co:16600 N; D:76.2000 mm; Basic Dynamic Radial Load Rating C:15100 N; Lateral Eccentricity Max LE:0.003 mm; Fillet Radius ra:0.80 mm; |
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
7397/2216K Slewing Bearing 2216x2650x220mm Video