| 16mm Bearing Steel Ball | H2:41 mm; G:R1/8"; d1:38 mm; Z:17 mm; Designation of housing:SP203-205/52N-; C0:7.8 kN; Adapter sleeve reference:HLK2305; L:264 mm; s1:16.7 mm; L1:225 mm; |
| 100 mm x 215 mm x 47 mm 5.1594mm/0.2031inch Bearing Steel Ball | Shaft Attachment (2):Set Screw; Bearing Series:210 Series; Ball Material:Steel; Ship Weight:6.01 LB; Anti-Rotation Pin:Yes; Housing Coating:Powder Coat; Retainer Material:Nylon; Housing Material:Cast Iron; Flinger Type:Rubberized; Expansion Type:Non-Expansion; Size (mm):100 mm x 215 mm x 47 mm ; |
| 10mm Bearing Steel Ball | UPC:782475035588; Ship Weight:20.01 LB; Seal Type:Grease Seal (Taper); Base to Center Hight Numeric:2.8800 in; Expansion Type:Non-Expansion; Housing Product Type:SPECIAL DUTY; Split Housing:SPLIT; Housing Series:107 SERIES (106 - 10; Shaft Attachment Type:TYPE C; Housing Type:2 Bolt Pillow Block; |
| 13.4938mm/0.53125inch Bearing Steel Ball | Mass:0.36 kg; Max operating temperature, Tmax:120 °C; ra max:1 mm; d:30 mm; Min operating temperature, Tmin:-20 °C; Characteristic rolling element frequency, BSF:4.14 Hz; rs min:1.1 mm; Characteristic inner ring frequency, BPFI:4.92 Hz; f0:13.3; Fatigue limit load, Cu:0.68 kN; |
| 5mm Bearing Steel Ball | Radial rigidity:70 N/µm; r1a max:0.15 mm; Characteristic outer ring frequency, BPF0:3.41 Hz; Brand:NTN; a:8.2 mm; d2:14 mm; Max operating temperature, Tmax:120 °C; d:10 mm; Preload level:GL; Db max:24.8 mm; |
| 11.5094mm/0.4531inch Bearing Steel Ball | C0:11.2 kN; Recommended tightening torque for set screw:11.5 Nm; Weight:0.93 kg; A:31 mm; e:18 mm; A2:44.7 mm; A1:13 mm; d:30 mm; T max.:100 °C; B1:35.7 mm; |
| 19mm Bearing Steel Ball | C0:15.2 kN; C1:6.5 mm; S:17 mm; m:6 mm; D:72 mm; B:43 mm; T min.:-20 °C; C:24 mm; r:1.5; T max.:100 °C; |
| 8mm Bearing Steel Ball | Radial clearance class:CN; Brand:NTN; Characteristic rolling element frequency, BSF:5.37 Hz; ra max:1.5 mm; Min operating temperature, Tmin:-25 °C; D:120 mm; da max:80.5 mm; B:23 mm; Characteristic inner ring frequency, BPFI:5.9 Hz; rs min:1.5 mm; |
| 11.5mm Bearing Steel Ball | s1:15.5 mm; Designation of open end cover:SCO204-12; J:52 mm; C0:6.65 kN; N:M10; Recommended tightening torque for set screw:5.5 Nm; A1:22 mm; Designation of bearing:UC201G2L3; Weight:0.67 kg; Dz:54 mm; |
| 21mm Bearing Steel Ball | Mass:1.51 kg; Brand:NTN; Lubrication hole on inner ring:Non/No; t:3 mm; F:195 mm; d:180 mm; ras max:1 mm; Precision class:P0; B:45 mm; da min:186.5 mm; |