| 6004-2RS 6004-ZZ Radial Ball Bearing | d:40 mm; SW:4 mm; C1:6.3 mm; D:80 mm; Recommended tightening torque for set screw:11.5 Nm; r:1.1; C0:18.2 kN; T max.:200 °C; G:M8x1; T min.:-20 °C; |
| 4.7625mm/0.1875inch Bearing Steel Ball | Recommended tightening torque for set screw:8 Nm; Weight:1.56 kg; H:47.6 mm; B:42.9 mm; Z:59.9 mm; Dz:80 mm; G:M6x1; A1:27 mm; N:M12; E:22 mm; |
| 6.35mm/0.25inch Bearing Steel Ball | Brand:Baldor-Dodge; Housing Type:Wide Slot Take-Up; Housing Product Type:TYPE E; UPC:782475697045; Bearing Series:107 Series; Bearing Insert Material:Steel; Bearing Bore Shape:Tapered; Setscrew Angle:65; Housing Series:107 SERIES (106 - 10; Split Housing:NO; |
| Cylindrical Roller Bearings NN3009 | Mass:0.06 kg; Characteristic inner ring frequency, BPFI:6.5 Hz; Static load, C0:5.5 kN; rs min:0.6 mm; Min operating temperature, Tmin:-40 °C; Nref:18,000 rpm; Characteristic outer ring frequency, BPF0:4.5 Hz; r1s min:0.6 mm; Fatigue limit load, Cu:0.25 kN; Contact angle α:40 °; |
| 8mm Bearing Steel Ball | Radial clearance class:CN; Brand:NTN; Characteristic rolling element frequency, BSF:5.37 Hz; ra max:1.5 mm; Min operating temperature, Tmin:-25 °C; D:120 mm; da max:80.5 mm; B:23 mm; Characteristic inner ring frequency, BPFI:5.9 Hz; rs min:1.5 mm; |
| 23.8125mm/0.9375inch Bearing Steel Ball | Ball Material:440 STAINLESS STEEL; Ship Weight:0.9 LB; Flinger Material:Stainless Steel; Bearing Bore Shape:Round; Shaft Attachment (2):Grip Tight; Anti-Rotation Pin:Yes; Ball Grade:Class 24; Bearing Insert Material:Nickel-Coated Steel; End Cap Groove:Yes; d:20.0000 in; |
| 11.1125mm/0.4375inch Bearing Steel Ball | J:150 mm; A1:18 mm; C0:45 kN; A:56 mm; G:R1/8"; T max.:200 °C; B:74.6 mm; e:38 mm; s1:37.3 mm; L:188 mm; |
| 21.4313mm/0.84375inch Bearing Steel Ball | C0:7.88 kN; Recommended tightening torque for set screw:3.7 Nm; s1:17 mm; L:70 mm; H:36.5 mm; Weight:0.61 kg; B:34 mm; Designation of bearing:UC205-15G2T04; H2:70 mm; A1:21 mm; |
| 15.0812mm/0.59375inch Bearing Steel Ball | Z:74.6 mm; Dz:100 mm; Weight:3.68 kg; Designation of housing:PH210N-; Designation of bearing:US210G2T04; B:43.5 mm; d:50 mm; C0:23.2 kN; Recommended tightening torque for set screw:11.5 Nm; J:159 mm; |
| 6305,6305-ZZ,6305-2RS Deep Groove Ball Bearing | H2:62 mm; T max.:100 °C; N:M10; s1:30.5 mm; L:76 mm; C0:6.65 kN; T min.:-20 °C; Recommended tightening torque for set screw:3.7 Nm; H:30.2 mm; E:13 mm; |