| SQZ16RS Rod Ends 16x44x103mm | precision rating:ABEC 1 (ISO Cla; outer ring width:17 mm; cage material:Bronze; fillet radius:1 mm; radial static load capacity:3080 lbf; B:17 mm; row type & fill slot:Single-Row Non-Fill; series:73; finish/coating:Uncoated; bearing material:Steel; |
| 22310 Bearing 50x110x40mm | inside diameter:25 mm; overall length:25 mm; operating temperature range:-328 to +536 &d; bushing material:PTFE; bushing outside diameter:28 mm; maximum p value:20000 psi; maximum pv value:100000; bushing type:Plain; |
| SN328 Shaft Block Bearing 140x300x180mm | Grease Limiting Speed (r/min):27800; d:25mm; Cage Type:Plastic; Availability:In Stock; Dynamic Load Rating (kN):11.1; Seals or Shields:Open Type; SKU:7005a5trdudmp3-nsk; Static Load Rating (kN):7.1; Weight:0.08 KGS; Clearance:Standard; |
| QJF230 Mill Location Bearing 150x370x45mm | housing material:PBT Thermoplastic; slot width:0.2500 in; slot spacing:3.1094 in; series:UCWTPL200MZ2CW; locking device:Set Screw; seal type:Contact with Slinger; d:1.5000 in; overall height:4-31/64 in; dynamic load capacity:6590 lbf; overall length:5-33/64 in; |
| BA180－4WSA Excavator Bearing 180x250x33mm | race material:PTFE Composite; thread direction:Left Hand; rod end type:Male Threaded with M; head width:0.500 in; operating temperature range:-40 to +275 &de; shank thread length:1.500 in; grade:Commercial; d:0.5000 in; head diameter:* 1.312; misalignment angle:12 °; |
| 23034CC/W33 Bearing 170×260×67mm | taper:1:12; includes:Lock Washer (W1; d:2.7500 in; lock nut outside diameter:4-5/32 in; compatible bearing number:1316, 1216, 22216; lock nut number:AN16; series:SNW; overall length:60.35 mm; lock washer number:W16; thread size:3.137-12; |
| 210BA29V Excavator Bearing 210x295x35mm | face diameter:38 mm; material:Steel; key width:5 mm; series:MB-00; outside diameter over tangs:49 mm; tang thickness:1.25 mm; d:30 mm; compatible lock nut number:KM6; |
| 3NCF5922VX2 Full Roller Bearings 110x150x59mm | bearing material:Powdered Metal SAE 8; material specification:SAE 841 Bronze; maximum pv value:50000; standards met:ASTM B438 Grade 1 Ty; d:1/2 in; maximum p value:2000; D:3/4 in; overall length:3/4 in; operating temperature range:10 to 220 ºF; manufacturer upc number:717905074752; |
| 21314RH Bearing 70*150*35mm | finish/coating:Uncoated; unit type:Side Mount; d:2.1875 in; seal type:None; compatible frame number:WS502; expansion type:Expansion Bearing &#; housing material:Cast Iron; locking device:None; B:5-7/8 in; slot width:1.0625 in; |
| KMR12 Rod End Bearing 0.75x1.75x0.875mm | D:4.0000 in; internal clearance:Normal Clearance; bore type:Round; d:2.0000 in; B:0.8125 in; |