| 7009AC HQ1 P2 DBL Angular Contact Ball Bearing 45x75x16mm | A1:16 mm; C0:23.2 kN; A:49 mm; T max.:100 °C; H:117 mm; L2:16 mm; L:149 mm; Designation of housing:T210-; G:M6x1; S:11 mm; |
| 40TAC72B Bearing 40x72x15mm | T max.:100 °C; T min.:-20 °C; S:17 mm; r:0.6; SW:3.18 mm; B2:13.5 mm; d1:32.4 mm; Recommended tightening torque for set screw:3.7 Nm; C0:6.65 kN; D:47 mm; |
| 7006AC 2RZ HQ1 P2 GA Ceramic Ball Bearing | da min:232.4 mm; Characteristic inner ring frequency, BPFI:12.9 Hz; Brand:SNR; Characteristic rolling element frequency, BSF:7.94 Hz; D:340 mm; Characteristic outer ring frequency, BPF0:10.1 Hz; b:14.1 mm; Nlim:1,800 rpm; Nref:1,200 rpm; Static load, C0:2,750 kN; |
| NN4924MBKR Bearing 120x165x45mm | Shape:Block; Seals:ZZ (Double Shield); Bearing I.D. d(mm):10; Number of Bearings:Single; Holder Surface Treatment:Not Provided; Housing Material:304 Stainless Steel; Type:Bearings with Housin; Lateral Width L(mm):58; Bearing Used:Deep Groove Ball Bea; Bearing Retained:Yes (with retaining; |
| NN3017MBKRCC1P4 Bearing 85x130x34mm | C:31.85 kN; G:M6x1; B:42.8 mm; T max.:100 °C; S:21.4 mm; A3:2 mm; d1:62 mm; B1:56.3 mm; C0:20.8 kN; H:110 mm; |
| 65BAR10E Bearing 65x100x33mm | Application:For Outer Ring; Material:Low Carbon Steel; O.D. D(φ):19; Surface Treatment:Electroless Nickel P; L(mm):3 ～ 50; RoHS:6; Days to Ship:7 Days; I.D. d(φ):14; L Dimension Tolerance:Positive Tolerance; |
| 60BTR10E Bearing 60x95x33mm | s1:13.5 mm; C0:7.88 kN; H2:70 mm; L:70 mm; T max.:100 °C; C:14 kN; Recommended tightening torque for set screw:3.7 Nm; B:27 mm; d:22.22 mm; L1:21 mm; |
| NN4928MBKR Bearing 140x190x50mm | T min.:-20 °C; e:28 mm; Designation of housing:FE210-; J:111 mm; N:18mm; Weight:2.5 kg; T max.:100 °C; Recommended tightening torque for set screw:8 Nm; G:R1/8"; A1:13 mm; |
| 7010C T P4 DBL Angular Contact Ball Bearing 50x80x16mm | Designation of bearing:UC205-15G2T20; Z:17.2 mm; H:36.5 mm; d:23.81 mm; L:140 mm; B:34 mm; G:M6x1; Weight:0.81 kg; s1:17 mm; Recommended tightening torque for set screw:3.7 Nm; |
| 110BAR10S Bearing 110x170x54mm | Bearing Weight:1.1 Kg; Y - ISO Factor9:1.39; Design Units:METRIC; C0 - Static Radial Rating:198000 N; G1 - Heat Generation Factor (Roller-Raceway):76.7; Db - Cup Backface Backing Diameter:103.12 mm; r - Cup Backface To Clear Radius2:2.54 mm; Cg - Geometry Factor:0.112; a - Effective Center Location3:-2.5 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:33900 N; |