| COM8 Inch Spherical Bearings 0.5x1x0.5inch | fillet radius:1 mm; closure type:Open; ball screw application:Not for Ball Screws; D:72 mm; B:17 mm; finish/coating:Uncoated; d:35 mm; internal clearance:C0; cage material:Phenolic Resin; precision rating:ABEC 7 (ISO Cla; |
| QJF1020 Mill Locating Bearing 100x150x24mm | B:16.129 mm; lock nut type:For Lock Washer; thread size:3.34-12 in; material:Steel; h:4.216 mm; overall nut width:5/8 in; series:AN; Axial load carrying capacity, static:185 kN; b:9.144 mm; |
| C2216V Toroidal Roller Bearing 80X140X33mm | compatible bore diameter:2-7/16 in; compatible housed unit:R; series:Sleevoil; end cap type:Open End Cap; |
| SN508 Shaft Block Bearing 35x80x60mm | radial dynamic load capacity:14270 lbs; flange thickness:0.5930 in; roller width:2.0000 in; stud diameter:1.2500 in; closure type:Open; roller shape:Crowned; thread size:1-1/4-12; stud length:2.7500 in; lubrication hole location:None; axial static load capacity:12000 lb; |
| NATR17 Support Roller Bearing 17x40x21mm | Cage Type:Steel; Clearance:Standard; Oil Limiting Speed (r/min):40000; Dynamic Load Rating (kN):1.72; Grease Limiting Speed (r/min):34000; Seals or Shields:Non-Contact Seal; D:19mm; Availability:In Stock; B:5mm; Static Load Rating (kN):0.84; |
| QJ1032 Mill Locating Bearing 160x240x38mm | finish/coating:Uncoated; closure type:Open; D:80 mm; series:NU22; fillet radius:1 mm; dynamic load capacity:83000 N; static load capacity:75000 N; maximum rpm:10900 RPM; cage material:Brass; bore type:Straight; |
| E8 China Magneto Bearing 8X24X7mm | B:100 mm; locking device:Set Screw; lubrication type:Lubrication Fitting; replacement bearing:UC211; radial dynamic load capacity:4400 kgf; mounting:Two-Bolt Base; D:162 mm to 181 mm; end type:1 Open & 1 Close; expansion type:Non-Expansion Bearin; overall height:133 mm; |
| 22209EAE4, 22209E, 22209EAM.S, 22209 Spherical Roller Bearing 40x85x23mm | precision rating:Not Rated; series:MJH; drawn cup type:Closed Ends; B:5-11/16 in; lubrication hole type:No Hole; d:3/4 in; closure type:Single Seal; number of rows:One; |
| LR5201NPPU LR5201KDDU Track Roller Bearing 12x35x15.9mm | G:Tr 670x6; Hydraulic nut:HMV 134 E; G2:G 1/4; B1:330 mm; d1:600 mm; B2:356 mm; Mass withdrawal sleeve:101 kg; d:630 mm; G1:40 mm; A:9 mm; |
| TTSX750/HC Huge Bearing 300x750x260mm | overall height:5-1/8 in; maximum rpm:4450 RPM; housing material:Cast Iron; seal type:Clearance/Non-C; bore type:Round; radial static load capacity:21300 lb; flange mounting type:Four-Bolt Square; lubrication type:Lubrication Fitting; finish/coating:Powder Coated; standards met:ANSI/ABMA STD 9; |